Aeronautical (Space) Engineering stream
| Unit of study | Credit points | A: Assumed knowledge P: Prerequisites C: Corequisites N: Prohibition | Session |
|---|---|---|---|
Aeronautical (Space) Engineering |
|||
| Candidates for the degree of Bachelor of Aeronautical (Space) Engineering are required to gain credit for the core units of study set out below. Any additional credit necessary shall be gained by completing additional credit points of elective units of study as recommended by the Faculty, as may be necessary to gain credit for a total of not less than 192 credit points. | |||
Core units of study |
|||
First year |
|||
| MATH1001 Differential Calculus |
3 | A HSC Mathematics Extension 1 N MATH1011, MATH1901, MATH1906, MATH1111 |
Semester 1 Summer Main |
| MATH1002 Linear Algebra |
3 | A HSC Mathematics Extension 1 N MATH1902, MATH1012, MATH1014 |
Semester 1 Summer Main |
| ENGG1801 Engineering Computing |
6 | N INFO1000, COSC1001, COSC1002, INFO1003 |
Semester 1 |
| AERO1560 Introduction to Aerospace Engineering |
6 | N MECH1560, MTRX1701, ENGG1800 |
Semester 1 |
| ENGG1803 Professional Engineering 1 |
6 | Semester 1 Semester 2 |
|
| Normally taken in Semester 1. Students in combined degrees are exempt. | |||
| MATH1003 Integral Calculus and Modelling |
3 | A HSC Mathematics Extension 2 or MATH1001 or MATH1011 N MATH1013, MATH1903, MATH1907 |
Semester 2 Summer Main |
| MATH1005 Statistics |
3 | A HSC Mathematics N MATH1015, MATH1905, STAT1021, STAT1022, ECMT1010 |
Semester 2 Summer Main |
| ENGG1802 Engineering Mechanics |
6 | Semester 2 Summer Main |
|
| AMME1550 Dynamics 1 |
6 | Semester 2 |
|
| PHYS1001 is an acceptable alternative for BE/BSc students. | |||
| AERO1400 Intro to Aircraft Construction & Design |
6 | A Some basic skills with engineering workshop hand tools is desireable Note: Department permission required for enrolment |
Semester 2 |
| Students in combined degrees are exempt. | |||
Second year |
|||
| MATH2067 DEs and Vector Calculus for Engineers |
6 | P MATH(1011 or 1001 or 1901 or 1906) and MATH(1014 or 1002 or 1902) and MATH(1003 or 1903 or 1907) N MATH2001, MATH2901, MATH2005, MATH2905, MATH2061, MATH2961, MATH2065, MATH2965 |
Semester 1 |
| AMME2301 Mechanics of Solids |
6 | P (MATH1001 or MATH1901 or MATH1906), (MATH1002 or MATH1902), (MATH1003 or MATH1903 or MATH1907), (ENGG1802 or PHYS1001 or PHYS1901) |
Semester 2 |
| AMME2500 Engineering Dynamics |
6 | P (MATH1001 or MATH1901 or MATH1906), (MATH1002 or MATH1902), (AMME1550 or PHYS1001 or PHYS1901 ) |
Semester 1 |
| BE/BSc students can enrol in PHYS2011, PHYS2012, or advanced equivalent, as acceptable alternative. | |||
| AMME2200 Thermodynamics and Fluids |
6 | A MATH1001; MATH1002; MATH1003. |
Semester 2 |
| BE/BSc students can enrol in PHYS2011, PHYS2012, or advanced equivalent, as acceptable alternative. | |||
| ELEC2004 Electrical Engineering: Foundations |
6 | N ELEC1103, ELEC1601 |
Semester 1 |
| Students in combined degrees are exempt from this unit. | |||
| AMME2302 Materials 1 |
6 | N CIVL2110 |
Semester 1 |
| MECH2400 Mechanical Design 1 |
6 | A ENGG1802,AMME2302 C AMME2301 |
Semester 2 |
| AERO2705 Space Engineering 1 |
6 | A ENGG1801 P AERO1560 (or MECH1560 or MTRX1701), MATH1001, MATH1002, MATH1003) |
Semester 2 |
Third year |
|||
| AERO3260 Aerodynamics 1 |
6 | P AMME2200 and (MATH2061 or MATH2067) |
Semester 2 |
| AERO3360 Aerospace Structures 1 |
6 | P AMME2301 |
Semester 1 |
| AERO3460 Aerospace Design 1 |
6 | P AMME2301 and MECH2400 |
Semester 1 |
| AMME3500 System Dynamics and Control |
6 | P AMME2500; (MATH2061 or MATH2961 or MATH2067) |
Semester 1 |
| AERO3560 Flight Mechanics 1 |
6 | P AMME2500 and (MATH2061 or MATH2067) C AMME3500 |
Semester 2 |
| AERO3760 Space Engineering 2 |
6 | P AERO2705 |
Semester 2 |
| AERO3660 Aerospace Management |
6 | Semester 1 |
|
| Students in combined degrees are exempt from this unit. | |||
| AERO3261 Propulsion |
6 | A Good knowledge of fluid dynamics including gas dynamics P AMME2200 |
Semester 2 |
| Students in combined degrees are exempt from this unit. | |||
Fourth year |
|||
| AERO4360 Aerospace Structures 2 |
6 | P AERO3360 |
Semester 1 |
| AERO4701 Space Engineering 3 |
6 | P AERO3760 |
Semester 1 |
| AERO4560 Flight Mechanics 2 |
6 | A AMME2500 P AERO3560 and AMME3500 |
Semester 1 |
| ENGG4000 Practical Experience |
P 36 Credit Points of Senior Units Students should have completed three years of their BE program before enrolling in this unit. |
Semester 1 Semester 2 |
|
| AERO4260 Aerodynamics 2 |
6 | P AMME2200 |
Semester 2 |
| Students in combined degrees are exempt. | |||
Students must select 12cp from the following block of units. |
|||
| Students enrol in either Honours Thesis A&B or Engineering Project A&B. For enrolment in Honours an ISWAM of 65% or greater is required. | |||
| AMME4111 Honours Thesis A |
6 | P 36 credit points of senior units of study and 2nd/3rd year WAM of 65% or greater C AMME4112 N AMME4121, AMME4122, AMME4010 Note: Department permission required for enrolment |
Semester 1 Semester 2 |
| Normally taken in Semester 1 | |||
| AMME4112 Honours Thesis B |
6 | P AMME4111 Honours Thesis A N AMME4121, AMME4122, AMME4010 Note: Department permission required for enrolment |
Semester 1 Semester 2 |
| Normally taken in Semester 2 | |||
| AMME4121 Engineering Project A |
6 | P 36 credit points of senior units of study. C AMME4122 N AMME4111, AMME4112, AMME4010 |
Semester 1 Semester 2 |
| Normally taken in Semester 1. | |||
| AMME4122 Engineering Project B |
6 | P AMME4121 Engineering Project A N AMME4111, AMME4112, AMME4010 |
Semester 1 Semester 2 |
| Normally taken in Semester 2 | |||
Acceptable alternative units of study |
|||
| Students in the Honours program must enrol in AMME4111 & AMME4112, students in the Pass program must enrol in AMME4121 & AMME4122. | |||
| BE/BSc students can enrol in PHYS2011, PHYS2012, or advanced equivalent, as acceptable alternative to AMME2200 & AMME2500. | |||
| Most units of study offered by the Science Faculty shown in the tables can be replaced by an equivalent advanced level unit, subject to prerequisite conditions (as required by the Faculty of Science) being met. | |||
| Students undertaking Study Abroad in a particular year of their degree must enrol in the appropriate Aerospace International Exchange Program units of study as an alternative to a semester's standard units. | |||
Resolutions of the Faculty of Engineering relating to this table: |
|||
BE(Aeronautical Engineering)(Space) |
|||
| In addition to gaining credit for the units of study set out in the above table, candidates are required to complete 12 credit points from either the table of recommended units of study for Aeronautical (Space) Engineering or from free elective units of study. A minimum of 192 credit points is required to be eligible for the award of BE(Aeronautical)(Space). | |||
BE(Aeronautical Engineering)(Space)/BSc or BMedSc or BCom |
|||
| In addition to gaining credit for the units of study set out in this table, candidates are required to complete at least 96 credit points of units of study given by the Faculty of Science for the BE/BSc or BE/BMedSc; or the Faculty of Economics and Business for the BE/BCom. A minimum of 240 credit points is required to be eligible for the combined degrees. Candidates should refer to the Joint Resolutions of the Faculty of Engineering and the faculty in which they are undertaking the combined degree. | |||
BE(Aeronautical Engineering)(Space)/BA |
|||
| In addition to gaining credit for the units of study set out in this table, candidates are required to complete at least 84 credit points of units of study given by the Faculty of Arts for the BE/BA and 12 credit points from the table of recommended elective units of study for Aeronautical (Space) Engineering. A minimum of 240 credit points is required to be eligible for the combined degree. Candidates should refer to the Joint Resolutions of the Faculty of Engineering and the faculty in which they are undertaking the combined degree. | |||
BE(Aeronautical Engineering)(Space)/LLB |
|||
| In addition to gaining credit for the core units of study set out in this table, candidates are required to complete at least 144 credit points of units of study given by the Faculty of Law for the BE/LLB. A minimum of 288 credit points is required to be eligible for the combined degrees. Candidates should refer to the Joint Resolutions of the Faculty of Engineering and IT and the Faculty of Law. | |||
Recommended elective units of study |
|||
| AMME4210 Computational Fluid Dynamics |
6 | A Partial differental equations, finite difference methods, linear algebra, matrix methods, pressure, force, acceleration, continuity, streamline and streamfunction, viscosity, control parameters, non-dimensionalisation. P MECH3261 or AERO3260 Note: Department permission required for enrolment |
Semester 1 |
| AMME4500 Guidance and Control |
6 | P AMME3500. |
Semester 2 |
| AMME4700 Inertial Navigation & the Kalman Filter This unit of study is not available in2011 |
6 | P AERO4701 or MECH4720 or MECH4730 or MTRX4700 or AERO4560. Note: Department permission required for enrolment |
Semester 2 |
| AERO4591 Advanced Flight Mechanics |
6 | P AERO3560 and AMME3500 Note: Department permission required for enrolment |
Semester 2 |
Notes |
|||
| 1. Choice of electives as shown in the above table will depend on subject availability, timetabling and prerequisite conditions. | |||
| 2. Units of study not included in this table may also be selected subject to the approval of the Head of School Aerospace, Mechanical and Mechatronic Engineering. | |||