Calculus is a discipline of mathematics that finds profound applications in science, engineering, and economics. This unit investigates differential calculus and integral calculus of one variable and the diverse applications of this theory. Emphasis is given both to the theoretical and foundational aspects of the subject, as well as developing the valuable skill of applying the mathematical theory to solve practical problems. Topics covered in this unit of study include complex numbers, functions of a single variable, limits and continuity, differentiation, optimisation, Taylor polynomials, Taylor's Theorem, Taylor series, Riemann sums, and Riemann integrals.

Calculus is a discipline of mathematics that finds profound applications in science, engineering, and economics. This unit investigates differential calculus and integral calculus of one variable and the diverse applications of this theory. Emphasis is given both to the theoretical and foundational aspects of the subject, as well as developing the valuable skill of applying the mathematical theory to solve practical problems. Topics covered in this unit of study include complex numbers, functions of a single variable, limits and continuity, differentiation, optimisation, Taylor polynomials, Taylor's Theorem, Taylor series, Riemann sums, and Riemann integrals. Additional theoretical topics included in this advanced unit include the Intermediate Value Theorem, Rolle's Theorem, and the Mean Value Theorem.

The Mathematics Special Studies Program is for students with exceptional mathematical aptitude, and requires outstanding performance in past mathematical studies. Students will cover the material of MATH1921 Calculus of One Variable (Adv), and attend a weekly seminar covering special topics on available elsewhere in the Mathematics and Statistics program.

MATH1002 is designed to provide a thorough preparation for further study in mathematics and statistics. It is a core unit of study providing three of the twelve credit points required by the Faculty of Science as well as a Junior level requirement in the Faculty of Engineering.
This unit of study introduces vectors and vector algebra, linear algebra including solutions of linear systems, matrices, determinants, eigenvalues and eigenvectors.

This unit is designed to provide a thorough preparation for further study in mathematics and statistics. It is a core unit of study providing three of the twelve credit points required by the Faculty of Science as well as a Junior level requirement in the Faculty of Engineering. It parallels the normal unit MATH1002 but goes more deeply into the subject matter and requires more mathematical sophistication.

Calculus is a discipline of mathematics that finds profound applications in science, engineering, and economics. This unit investigates multivariable differential calculus and modelling. Emphasis is given both to the theoretical and foundational aspects of the subject, as well as developing the valuable skill of applying the mathematical theory to solve practical problems. Topics covered in this unit of study include mathematical modelling, first order differential equations, second order differential equations, systems of linear equations, visualisation in 2 and 3 dimensions, partial derivatives, directional derivatives, the gradient vector, and optimisation for functions of more than one variable.

Calculus is a discipline of mathematics that finds profound applications in science, engineering, and economics. This unit investigates multivariable differential calculus and modelling. Emphasis is given both to the theoretical and foundational aspects of the subject, as well as developing the valuable skill of applying the mathematical theory to solve practical problems. Topics covered in this unit of study include mathematical modelling, first order differential equations, second order differential equations, systems of linear equations, visualisation in 2 and 3 dimensions, partial derivatives, directional derivatives, the gradient vector, and optimisation for functions of more than one variable. Additional topics covered in this advanced unit of study include the use of diagonalisation of matrices to study systems of linear equation and optimisation problems, limits of functions of two or more variables, and the derivative of a function of two or more variables.

The Mathematics Special Studies Program is for students with exceptional mathematical aptitude, and requires outstanding performance in past mathematical studies. Students will cover the material of MATH1923 Multivariable Calculus and Modelling (Adv), and attend a weekly seminar covering special topics on available elsewhere in the Mathematics and Statistics program.

In a data-rich world, global citizens need to problem solve with data, and evidence based decision-making is essential is every field of research and work.
This unit equips you with the foundational statistical thinking to become a critical consumer of data. You will learn to think analytically about data and to evaluate the validity and accuracy of any conclusions drawn. Focusing on statistical literacy, the unit covers foundational statistical concepts, including the design of experiments, exploratory data analysis, sampling and tests of significance.

This unit is designed to provide a thorough preparation for further study in mathematics and statistics. It is a core unit of study providing three of the twelve credit points required by the Faculty of Science as well as a Junior level requirement in the Faculty of Engineering. This Advanced level unit of study parallels the normal unit MATH1005 but goes more deeply into the subject matter and requires more mathematical sophistication.

This unit opens with topics from vector calculus, including vector-valued functions (parametrised curves and surfaces; vector fields; div, grad and curl; gradient fields and potential functions), line integrals (arc length; work; path-independent integrals and conservative fields; flux across a curve), iterated integrals (double and triple integrals, polar, cylindrical and spherical coordinates; areas, volumes and mass; Green's Theorem), flux integrals (flow through a surface; flux integrals through a surface defined by a function of two variables, through cylinders, spheres and other parametrised surfaces), Gauss' and Stokes' theorems. The unit then moves to topics in solution techniques for ordinary and partial differential equations (ODEs and PDEs) with applications. It provides a basic grounding in these techniques to enable students to build on the concepts in their subsequent courses. The main topics are: second order ODEs (including inhomogeneous equations), higher order ODEs and systems of first order equations, solution methods (variation of parameters, undetermined coefficients) the Laplace and Fourier Transform, an introduction to PDEs, and first methods of solutions (including separation of variables, and Fourier Series).

This is the advanced version of MATH2021, with more emphasis on the underlying concepts and mathematical rigour. The vector calculus component of the course will include: parametrised curves and surfaces, vector fields, div, grad and curl, gradient fields and potential functions, lagrange multipliers line integrals, arc length, work, path-independent integrals, and conservative fields, flux across a curve, double and triple integrals, change of variable formulas, polar, cylindrical and spherical coordinates, areas, volumes and mass, flux integrals, and Green's Gauss' and Stokes' theorems. The Differential Equations half of the course will focus on ordinary and partial differential equations (ODEs and PDEs) with applications with more complexity and depth. The main topics are: second order ODEs (including inhomogeneous equations), series solutions near a regular point, higher order ODEs and systems of first order equations, matrix equations and solutions, solution methods (variation of parameters, undetermined coefficients) the Laplace and Fourier Transform, elementary Sturm-Liouville theory, an introduction to PDEs, and first methods of solutions (including separation of variables, and Fourier Series). The unit then moves to topics in solution techniques for ordinary and partial differential equations (ODEs and PDEs) with applications. It provides a more thorough grounding in these techniques to enable students to build on the concepts in their subsequent courses. The main topics are: second order ODEs (including inhomogeneous equations), higher order ODEs and systems of first order equations, solution methods (variation of parameters, undetermined coefficients) the Laplace and Fourier Transform, an introduction to PDEs, and first methods of solutions (including separation of variables, and Fourier Series).

Nanoscience concerns the study of matter at the nanometer scale. At the microscale and even more at the nanoscale, the properties of matter are very different from those in the bulk. Modern methods used in nanoscience enable the manipulation and fabrication of matter and devices with unique properties. Nanoscience is a multidisciplinary research field that bridges the boundaries of traditional disciplines such as Physics, Chemistry, Biology and Engineering, generating impact across a wide range of sectors, from academic institutions and research centres to industry, addressing societal challenges in energy, environment, communication, computing, and health. This unit provides an introduction to nanostructured materials and the physical properties they exhibit. You will learn the fabrication tools and processes used in nanoscience, such as top-down and bottom-up, and the nanoscale characterization tools used across different disciplines. You will get direct exposure to research labs and tools available at the University, and in particular within the Sydney Nano Institute. You will develop skills required to address the complex and multidisciplinary problems in Nanoscience. By doing this unit, you will develop knowledge and skills that will enable you to play a role in finding nanoscience solutions to global challenges that impact our lives.

The ability to plan, systematically conduct and report on a major project, involving both research and design, is an important skill for professional engineers. The final year thesis units (Thesis A and Thesis B) aim to provide students with the opportunity to carry out a defined piece of independent research and design that fosters the development of engineering skills. These skills include: the capacity to define a problem; carry out systematic research in exploring how it relates to existing knowledge; identifying the tools needed to address the problem; designing a solution, product or prototype; analysing the results obtained; and presenting the outcomes in a report that is clear, coherent and logically structured.
The thesis is undertaken across two semesters of enrolment. Taken together, Thesis A covers initial research into the background of the problem being considered (formulated as a literature review), development of a detailed proposal incorporating project objectives, planning, and risk assessment, preliminary design, modelling and/or experimental work, followed by the detailed work in designing a solution, performing experiments, evaluating outcomes, analysing results, and writing up and presenting the outcomes. The final grade is based on the work done in both Thesis A and B, and will be awarded upon successful completion of Thesis B.
While recognising that some projects can be interdisciplinary in nature, it is the normal expectation that the students would do the project in their chosen area of specialisation. For student who are completing a Major within their BE degree, the thesis topic must be within the area of the Major. The theses to be undertaken by students will very often be related to some aspect of a staff member's research interests. Some projects will be experimental in nature, others may involve computer-based simulation and analysis, feasibility studies or the design, construction and testing of equipment. All however will require students to undertake research and design relevant to the topic of their thesis. The direction of thesis work may be determined by the supervisor or be of an original nature, but in either case the student is responsible for the execution of the practical work and the general layout and content of the thesis itself.
The thesis must be the student's individual work although it may be conducted as a component of a wider group project. Students undertaking research on this basis will need to take care in ensuring the quality of their own research and design work and their individual final thesis submission. The thesis will be judged on the extent and quality of the student's original work and particularly how critical, perceptive and constructive they have been in assessing their work and that of others. Students will also be required to present the results of their thesis to their peers and supervisors as part of a seminar program. Whilst thesis topics will be constrained by the available time and resources, the aim is to contribute to the creation of new engineering knowledge, techniques and/or solutions. Students should explore topics that arouse intellectual curiosity and represent an appropriate range and diversity of technical and conceptual research and design challenges.

The ability to plan, systematically conduct and report on a major project, involving both research and design, is an important skill for professional engineers. The final year thesis units (Thesis A and Thesis B) aim to provide students with the opportunity to carry out a defined piece of independent research and design that fosters the development of engineering skills. These skills include: the capacity to define a problem; carry out systematic research in exploring how it relates to existing knowledge; identifying the tools needed to address the problem; designing a solution, product or prototype; analysing the results obtained; and presenting the outcomes in a report that is clear, coherent and logically structured.
The thesis is undertaken across two semesters of enrolment. Taken together, Thesis A covers initial research into the background of the problem being considered (formulated as a literature review), development of a detailed proposal incorporating project objectives, planning, and risk assessment, preliminary design, modelling and/or experimental work, followed by the detailed work in designing a solution, performing experiments, evaluating outcomes, analysing results, and writing up and presenting the outcomes. The final grade is based on the work done in both Thesis A and B, and will be awarded upon successful completion of Thesis B.
While recognising that some projects can be interdisciplinary in nature, it is the normal expectation that the students would do the project in their chosen area of specialisation. For student who are completing a Major within their BE degree, the thesis topic must be within the area of the Major. The theses to be undertaken by students will very often be related to some aspect of a staff member's research interests. Some projects will be experimental in nature, others may involve computer-based simulation and analysis, feasibility studies or the design, construction and testing of equipment. All however will require students to undertake research and design relevant to the topic of their thesis. The direction of thesis work may be determined by the supervisor or be of an original nature, but in either case the student is responsible for the execution of the practical work and the general layout and content of the thesis itself.
The thesis must be the student's individual work although it may be conducted as a component of a wider group project. Students undertaking research on this basis will need to take care in ensuring the quality of their own research and design work and their individual final thesis submission. The thesis will be judged on the extent and quality of the student's original work and particularly how critical, perceptive and constructive they have been in assessing their work and that of others. Students will also be required to present the results of their thesis to their peers and supervisors as part of a seminar program. Whilst thesis topics will be constrained by the available time and resources, the aim is to contribute to the creation of new engineering knowledge, techniques and/or solutions. Students should explore topics that arouse intellectual curiosity and represent an appropriate range and diversity of technical and conceptual research and design challenges.

The ability to plan, systematically conduct and report on a major project, involving both research and design, is an important skill for professional engineers. The final year thesis units (Thesis A and Thesis B) aim to provide students with the opportunity to carry out a defined piece of independent research and design that fosters the development of engineering skills. These skills include: the capacity to define a problem; carry out systematic research in exploring how it relates to existing knowledge; identifying the tools needed to address the problem; designing a solution, product or prototype; analysing the results obtained; and presenting the outcomes in a report that is clear, coherent and logically structured. The thesis is undertaken across two semesters of enrolment. Taken together, the Thesis A covers initial research into the background of the problem being considered (formulated as a literature review), development of a detailed proposal incorporating project objectives, planning, and risk assessment, preliminary design, modelling and/or experimental work, followed by the detailed work in designing a solution, performing experiments, evaluating outcomes, analysing results, and writing up and presenting the outcomes. The final grade is based on the work done in both Thesis A and B, and will be awarded upon successful completion of Thesis B. While recognising that some projects can be interdisciplinary in nature, it is the normal expectation that the students would do the project in their chosen area of specialisation. For student who are completing a Major within their BE degree, the thesis topic must be within the area of the Major. The theses to be undertaken by students will very often be related to some aspect of a staff member's research interests. Some projects will be experimental in nature, others may involve computer-based simulation and analysis, feasibility studies or the design, construction and testing of equipment. All however will require students to undertake research and design relevant to the topic of their thesis. The direction of thesis work may be determined by the supervisor or be of an original nature, but in either case the student is responsible for the execution of the practical work and the general layout and content of the thesis itself. The thesis must be the student's individual work although it may be conducted as a component of a wider group project. Students undertaking research on this basis will need to take care in ensuring the quality of their own research and design work and their individual final thesis submission. The thesis will be judged on the extent and quality of the student's original work and particularly how critical, perceptive and constructive they have been in assessing their work and that of others. Students will also be required to present the results of their thesis to their peers and supervisors as part of a seminar program. Whilst thesis topics will be constrained by the available time and resources, the aim is to contribute to the creation of new engineering knowledge, techniques and/or solutions. Students should explore topics that arouse intellectual curiosity and represent an appropriate range and diversity of technical and conceptual research and design challenges.

The ability to plan, systematically conduct and report on a major project, involving both research and design, is an important skill for professional engineers. The final year thesis units (Thesis A and Thesis B) aim to provide students with the opportunity to carry out a defined piece of independent research and design that fosters the development of engineering skills. These skills include: the capacity to define a problem; carry out systematic research in exploring how it relates to existing knowledge; identifying the tools needed to address the problem; designing a solution, product or prototype; analysing the results obtained; and presenting the outcomes in a report that is clear, coherent and logically structured. The thesis is undertaken across two semesters of enrolment. Taken together, the Thesis A covers initial research into the background of the problem being considered (formulated as a literature review), development of a detailed proposal incorporating project objectives, planning, and risk assessment, preliminary design, modelling and/or experimental work, followed by the detailed work in designing a solution, performing experiments, evaluating outcomes, analysing results, and writing up and presenting the outcomes. The final grade is based on the work done in both Thesis A and B, and will be awarded upon successful completion of Thesis B. While recognising that some projects can be interdisciplinary in nature, it is the normal expectation that the students would do the project in their chosen area of specialisation. For student who are completing a Major within their BE degree, the thesis topic must be within the area of the Major. The theses to be undertaken by students will very often be related to some aspect of a staff member's research interests. Some projects will be experimental in nature, others may involve computer-based simulation and analysis, feasibility studies or the design, construction and testing of equipment. All however will require students to undertake research and design relevant to the topic of their thesis. The direction of thesis work may be determined by the supervisor or be of an original nature, but in either case the student is responsible for the execution of the practical work and the general layout and content of the thesis itself. The thesis must be the student's individual work although it may be conducted as a component of a wider group project. Students undertaking research on this basis will need to take care in ensuring the quality of their own research and design work and their individual final thesis submission. The thesis will be judged on the extent and quality of the student's original work and particularly how critical, perceptive and constructive they have been in assessing their work and that of others. Students will also be required to present the results of their thesis to their peers and supervisors as part of a seminar program. Whilst thesis topics will be constrained by the available time and resources, the aim is to contribute to the creation of new engineering knowledge, techniques and/or solutions. Students should explore topics that arouse intellectual curiosity and represent an appropriate range and diversity of technical and conceptual research and design challenges.

The ability to plan, systematically conduct and report on a major project, involving both research and design, is an important skill for professional engineers. The final year thesis units (Thesis A and Thesis B) aim to provide students with the opportunity to carry out a defined piece of independent research and design that fosters the development of engineering skills. These skills include: the capacity to define a problem; carry out systematic research in exploring how it relates to existing knowledge; identifying the tools needed to address the problem; designing a solution, product or prototype; analysing the results obtained; and presenting the outcomes in a report that is clear, coherent and logically structured.
The thesis is undertaken across two semesters of enrolment. Taken together, Thesis A covers initial research into the background of the problem being considered (formulated as a literature review), development of a detailed proposal incorporating project objectives, planning, and risk assessment, preliminary design, modelling and/or experimental work, followed by the detailed work in designing a solution, performing experiments, evaluating outcomes, analysing results, and writing up and presenting the outcomes. The final grade is based on the work done in both Thesis A and B, and will be awarded upon successful completion of Thesis B.
While recognising that some projects can be interdisciplinary in nature, it is the normal expectation that the students would do the project in their chosen area of specialisation. For student who are completing a Major within their BE degree, the thesis topic must be within the area of the Major. The theses to be undertaken by students will very often be related to some aspect of a staff member's research interests. Some projects will be experimental in nature, others may involve computer-based simulation and analysis, feasibility studies or the design, construction and testing of equipment. All however will require students to undertake research and design relevant to the topic of their thesis. The direction of thesis work may be determined by the supervisor or be of an original nature, but in either case the student is responsible for the execution of the practical work and the general layout and content of the thesis itself.
The thesis must be the student's individual work although it may be conducted as a component of a wider group project. Students undertaking research on this basis will need to take care in ensuring the quality of their own research and design work and their individual final thesis submission. The thesis will be judged on the extent and quality of the student's original work and particularly how critical, perceptive and constructive they have been in assessing their work and that of others. Students will also be required to present the results of their thesis to their peers and supervisors as part of a seminar program.
Whilst thesis topics will be constrained by the available time and resources, the aim is to contribute to the creation of new engineering knowledge, techniques and/or solutions. Students should explore topics that arouse intellectual curiosity and represent an appropriate range and diversity of technical and conceptual research and design challenges.

The ability to plan, systematically conduct and report on a major project, involving both research and design, is an important skill for professional engineers. The final year thesis units (Thesis A and Thesis B) aim to provide students with the opportunity to carry out a defined piece of independent research and design that fosters the development of engineering skills. These skills include: the capacity to define a problem; carry out systematic research in exploring how it relates to existing knowledge; identifying the tools needed to address the problem; designing a solution, product or prototype; analysing the results obtained; and presenting the outcomes in a report that is clear, coherent and logically structured.
The thesis is undertaken across two semesters of enrolment. Taken together, Thesis A covers initial research into the background of the problem being considered (formulated as a literature review), development of a detailed proposal incorporating project objectives, planning, and risk assessment, preliminary design, modelling and/or experimental work, followed by the detailed work in designing a solution, performing experiments, evaluating outcomes, analysing results, and writing up and presenting the outcomes. The final grade is based on the work done in both Thesis A and B, and will be awarded upon successful completion of Thesis B.
While recognising that some projects can be interdisciplinary in nature, it is the normal expectation that the students would do the project in their chosen area of specialisation. For student who are completing a Major within their BE degree, the thesis topic must be within the area of the Major. The theses to be undertaken by students will very often be related to some aspect of a staff member's research interests. Some projects will be experimental in nature, others may involve computer-based simulation and analysis, feasibility studies or the design, construction and testing of equipment. All however will require students to undertake research and design relevant to the topic of their thesis. The direction of thesis work may be determined by the supervisor or be of an original nature, but in either case the student is responsible for the execution of the practical work and the general layout and content of the thesis itself.
The thesis must be the student's individual work although it may be conducted as a component of a wider group project. Students undertaking research on this basis will need to take care in ensuring the quality of their own research and design work and their individual final thesis submission. The thesis will be judged on the extent and quality of the student's original work and particularly how critical, perceptive and constructive they have been in assessing their work and that of others. Students will also be required to present the results of their thesis to their peers and supervisors as part of a seminar program.
Whilst thesis topics will be constrained by the available time and resources, the aim is to contribute to the creation of new engineering knowledge, techniques and/or solutions. Students should explore topics that arouse intellectual curiosity and represent an appropriate range and diversity of technical and conceptual research and design challenges.

The ability to plan, systematically conduct and report on a major project, involving both research and design, is an important skill for professional engineers. The final year thesis units (Thesis A and Thesis B) aim to provide students with the opportunity to carry out a defined piece of independent research and design that fosters the development of engineering skills. These skills include: the capacity to define a problem; carry out systematic research in exploring how it relates to existing knowledge; identifying the tools needed to address the problem; designing a solution, product or prototype; analysing the results obtained; and presenting the outcomes in a report that is clear, coherent and logically structured.
The thesis is undertaken across two semesters of enrolment. Taken together, the Thesis A covers initial research into the background of the problem being considered (formulated as a literature review), development of a detailed proposal incorporating project objectives, planning, and risk assessment, preliminary design, modelling and/or experimental work, followed by the detailed work in designing a solution, performing experiments, evaluating outcomes, analysing results, and writing up and presenting the outcomes. The final grade is based on the work done in both Thesis A and B, and will be awarded upon successful completion of Thesis B.
While recognising that some projects can be interdisciplinary in nature, it is the normal expectation that the students would do the project in their chosen area of specialisation. For student who are completing a Major within their BE degree, the thesis topic must be within the area of the Major. The theses to be undertaken by students will very often be related to some aspect of a staff member's research interests. Some projects will be experimental in nature, others may involve computer-based simulation and analysis, feasibility studies or the design, construction and testing of equipment. All however will require students to undertake research and design relevant to the topic of their thesis. The direction of thesis work may be determined by the supervisor or be of an original nature, but in either case the student is responsible for the execution of the practical work and the general layout and content of the thesis itself.
The thesis must be the student's individual work although it may be conducted as a component of a wider group project. Students undertaking research on this basis will need to take care in ensuring the quality of their own research and design work and their individual final thesis submission. The thesis will be judged on the extent and quality of the student's original work and particularly how critical, perceptive and constructive he or she has been in assessing his/her work and that of others. Students will also be required to present the results of their thesis to their peers and supervisors as part of a seminar program.
Whilst thesis topics will be constrained by the available time and resources, the aim is to contribute to the creation of new engineering knowledge, techniques and/or solutions. Students should explore topics that arouse intellectual curiosity and represent an appropriate range and diversity of technical and conceptual research and design challenges.

The ability to plan, systematically conduct and report on a major project, involving both research and design, is an important skill for professional engineers. The final year thesis units (Thesis A and Thesis B) aim to provide students with the opportunity to carry out a defined piece of independent research and design that fosters the development of engineering skills. These skills include: the capacity to define a problem; carry out systematic research in exploring how it relates to existing knowledge; identifying the tools needed to address the problem; designing a solution, product or prototype; analysing the results obtained; and presenting the outcomes in a report that is clear, coherent and logically structured.
The thesis is undertaken across two semesters of enrolment. Taken together, the Thesis A covers initial research into the background of the problem being considered (formulated as a literature review), development of a detailed proposal incorporating project objectives, planning, and risk assessment, preliminary design, modelling and/or experimental work, followed by the detailed work in designing a solution, performing experiments, evaluating outcomes, analysing results, and writing up and presenting the outcomes. The final grade is based on the work done in both Thesis A and B, and will be awarded upon successful completion of Thesis B.
While recognising that some projects can be interdisciplinary in nature, it is the normal expectation that the students would do the project in their chosen area of specialisation. For student who are completing a Major within their BE degree, the thesis topic must be within the area of the Major. The theses to be undertaken by students will very often be related to some aspect of a staff member's research interests. Some projects will be experimental in nature, others may involve computer-based simulation and analysis, feasibility studies or the design, construction and testing of equipment. All however will require students to undertake research and design relevant to the topic of their thesis. The direction of thesis work may be determined by the supervisor or be of an original nature, but in either case the student is responsible for the execution of the practical work and the general layout and content of the thesis itself.
The thesis must be the student's individual work although it may be conducted as a component of a wider group project. Students undertaking research on this basis will need to take care in ensuring the quality of their own research and design work and their individual final thesis submission. The thesis will be judged on the extent and quality of the student's original work and particularly how critical, perceptive and constructive he or she has been in assessing his/her work and that of others. Students will also be required to present the results of their thesis to their peers and supervisors as part of a seminar program.
Whilst thesis topics will be constrained by the available time and resources, the aim is to contribute to the creation of new engineering knowledge, techniques and/or solutions. Students should explore topics that arouse intellectual curiosity and represent an appropriate range and diversity of technical and conceptual research and design challenges.

This course introduces atomistic computational techniques used in modern engineering to understand phenomena and predict material properties, behaviour, structure and interactions at nano-scale. The advancement of nanotechnology and manipulation of matter at the molecular level have provided ways for developing new materials with desired properties. The miniaturisation at the nanometre scale requires an understanding of material behaviour which could be much different from that of the bulk. Computational nanotechnology plays a growingly important role in understanding mechanical properties at such a small scale. The aim is to demonstrate how atomistic level simulations can be used to predict the properties of matter under various conditions of load, deformation and flow. The course covers areas mainly related to fluid as well as solid properties, whereas, the methodologies learned can be applied to diverse areas in nanotechnology such as, liquid-solid interfaces, surface engineering, nanorheology, nanotribology and biological systems. This is a course with a modern perspective for engineers who wish to keep abreast with advanced computational tools for material characterisation at the atomic scale.

The application of science and technology at the nanoscale for biomedical problems promises to revolutionise medicine. Recent years have witnessed unprecedented advances in the diagnosis and treatment of diseases by applying nanotechnology to medicine. This course focuses on explaining the fundamentals of nanomedicine, and highlighting the special properties and application of nanomaterials in medicine. This course also reviews the most significant biomedical applications of nanomaterials including the recent breakthroughs in drug delivery, medical imaging, gene therapy, biosensors and cancer treatment.

Nanotechnology in Biomedical Engineering will have a broad nanotechnology focus and a particular focus on the biophysics and electrical aspects of nanotechnology, as it relates to nanobiosensors and nanobioelectronics which represents a rapidly growing field in Biomedical Engineering that combines nanotechnology, electronics and biology with promising applications in bionics and biosensors. Nanodimensionality and biomimetics holds the potential for significant improvements in the sensitivity and biocompatibility and thereby open up new routes in clinical diagnostics, personalized health monitoring and therapeutic biomedical devices.

This course will give students insights into advanced concepts in Chemical and Biomolecular Engineering, which are essential for the design of efficient processes and green products for the sustainable development and minimise or preferably eliminate waste for a clean world. This unit of study will examine cutting edge examples of nano-technology, renewable energy, bio-technology, and other advanced technologies across a broad range of applications relevant to chemical and biomolecular engineering. At the completion of this unit of study students should have developed an appreciation of the underlying concepts and be able to demonstrate they can apply these skills to new and novel situations. Students are expected to develop an integrated suite of problem-solving skills needed to successfully handle novel (and previously unseen) engineering situations, coupled with an ability to independently research new areas and be critical of what is found, and an ability to cope with experimental data, change and uncertainty through critical thinking.