This unit of study aims to introduce graduate engineering students from all disciplines to the concepts and practices of entrepreneurial thinking. Introduction to Entrepreneurship will offer the foundation for leaders of tomorrow's high-tech companies, by providing the knowledge and skills important to the creation and leadership of entrepreneurial ventures. The focus of the unit of study is on how to launch, lead and manage a viable business starting with concept validation to commercialisation and successful business formation.
The following topics are covered: Entrepreneurship: Turning Ideas into Reality, Building the Business Plan, Creating a Successful Financial Plan, Project planning and resource management, Budgeting and managing cash flow, Marketing and advertising strategies, E-Commerce and Entrepreneurship, Procurement Management Strategies, The Legal Environment: Business Law and Government Regulation, Intellectual property: inventions, patents and copyright, Workplace, workforce and employment topics, Conflict resolution and working relationships, Ethics and Social Responsibility.

The aim of this unit of study is to give students an insight and understanding of the environmental and sustainability challenges that Australia and the planet are facing and how these have given rise to the practice of Sustainable Design, Engineering and Management. The objective of this course is to provide a comprehensive overview of the nature and causes of the major environmental problems facing our planet, with a particular focus on energy and water, and how engineering is addressing these challenges.
The course starts with a description of the physical basis of global warming, and proceeds with a discussion of Australia's energy and water use, an overview of sustainable energy and water technologies and sustainable building design. Topics include the principles of sustainability, sustainable design and social responsibility, sustainable and renewable energy sources, and sustainable use of water. Aspects of designing a sustainable building, technologies that minimise energy and water consumption, consider recycling and reducing waste disposal using advanced design will also be discussed during this course.

To develop an understanding of principles of safety systems management and risk management, as applied to engineering systems. AS/NZS 4801:2001 & 4804:2001 form the foundation for teaching methods of developing, implementing, monitoring and improving a safety management system in an Engineering context.
Students will be exposed to a number of case studies related to safety systems and on completion of the course be able to develop a safety management plan for an Engineering facility that meets the requirements of NSW legislation and Australian standards for Occupational Health and Safety management systems.
Students are introduced to a variety of risk management approaches used by industry, and methods to quantify and estimate the consequences and probabilities of risks occurring, as applied to realistic industrial scenarios.

"Project Management processes are what moves the project from initiation through all its phases to a successful conclusion. This course takes the project manager from a detailed understanding of process modelling through to the development and implementation of management processes applicable to various project types and industries and covers approaches to reviewing, monitoring and improving these processes.
Specifically, the UoS aims to: Develop understanding of the nature and purpose of project management in the context of economic enterprise; Develop knowledge of various models and frameworks for the practical application of project management; Explore core elements of effective project management with particular focus on technological development and innovation"

This unit of study provides an introduction to the field of biomedical engineering, from the point of view of the engineering and the global biomedical industry itself. After completion of this unit, students will have a clear understanding of what biomedical engineering is, both from the engineering perspective and the commercial/industry perspective.

The application of science and technology at the nanoscale for biomedical problems promises to revolutionise medicine. Recent years have witnessed unprecedented advances in the diagnosis and treatment of diseases by applying nanotechnology to medicine. This course focuses on explaining the fundamentals of nanomedicine, and highlighting the special properties and application of nanomaterials in medicine. This course also reviews the most significant biomedical applications of nanomaterials including the recent breakthroughs in drug delivery, medical imaging, gene therapy, biosensors and cancer treatment.

Mechanobiology has emerged as a new field of science that integrates biology and engineering and is now considered to have significant influence on the development of technologies for regenerative medicine and tissue engineering. It is well known that tissues and cells are sensitive to their mechanical environment and changes to this environment can affect the physiological and pathophysiological processes. Understanding the mechanisms by which biological cells sense and respond to mechanical signals can lead to the development of novel treatments and therapies for a variety of diseases.

Supply of medical devices, diagnostics and related therapeutic products is regulated in most jurisdictions, with sophisticated and complex regulatory regimes in all large economies. These regulations are applied both to manufacturers and designers and to biomedical engineers undertaking device custom manufacture or maintenance in clinical environments. This unit of study will explore the different regulatory frameworks in the "Global Harmonisation Task Force" group of jurisdictions (US, EU, Canada, Japan, Australia), as well as emerging regulatory practices in Asia and South America. Emphasis will be on the commonality of the underlying technical standards and the importance of sophisticated risk management approaches to compliance.

This course is divided into two parts- biomechanics and biomaterials:
Biomechanics is the study of the body from the point of view of it being an engineering structure. There are many aspects to this since the human body contains soft tissues, hard tissues (skeletal system), and articulating joints. We will begin with a general introduction to biomechanics, modelling the human body from the macroscopic level to the microscopic level. We will then study soft tissue mechanics, with respect to both non-linear and viscoelastic descriptions, with a significant focus on the mathematical methods used in relation to the mechanics of the system. We will then look at specific aspects of biomechanics: muscle mechanics, joint mechanics, kinematics and dynamics of human gait (gait analysis), biomechanics of cells, physiological fluid flow, biomechanics of injury, functional and mechanical response of tissues to mechanical loading.
This course will involve the study of biomaterials from two perspectives: firstly, the response of the body towards the biomaterial- an immune response and foreign body reaction; secondly, the response of the biomaterial to the body- corrosion, biodegradation, and mechanical failure. Our study will begin with the response of the body towards the biomaterial. We will begin by looking at the immune system itself and then move on to look at the normal inflammatory response. We will then study in detail the foreign body reaction caused by biomaterials. The final part of this section is the study of protein adsorption onto biomaterials, with a strong focus on the Vroman effect. Then we will move onto the response of the biomaterial to the body. We will begin by a review of biomaterials, their applications, and compositions, and mechanical properties. We will then look at key problems such as corrosion, stress shielding, static fatigue, and mechanical failure. Finally, we will take a practical look at the materials themselves. Beginning with metals, then polymers (thermoplastic, thermosetting, and biodegradable), and finally ceramics (bioinert, biodegradable, and bioactive).

With the severe worldwide shortage of donor organs and the ubiquitous problem of donor organ rejection, there is a strong need for developing technologies for engineering replacement organs and other body parts. Recent developments in biochemistry and cell biology have begun to make this possible, and as a consequence, the very new field of tissue engineering has been making dramatic progress in the last few years.
This unit will provide an introduction to the principles of tissue engineering, as well as an up to date overview of recent progress in the field of tissue engineering is and where it is going. This unit assumes prior knowledge of cell biology and chemistry and builds on that foundation to elaborate on the important aspects of tissue engineering. The objectives are: 1. To gain a basic understanding of the major areas of interest in tissue engineering; 2. To learn to apply basic engineering principles to tissue engineering systems; 3. To understand the challenges and difficulties of tissue engineering; 4. Understand the ethical issues of stem cell applications; 5. Practical classes in the preparation and evaluation of scaffolds for tissue regeneration; 6. Enable student to access web-based resources in tissue engineering (for example: Harvard-MIT Principles and Practice of Tissue Engineering); 7. Research basic skills in Tissue Engineering.

This unit of study will give students a comprehensive understanding of medical image based solid modelling, advanced finite element methods, constitutive material models, design analysis and optimisation algorithms, experimental validation and their use in biomedical engineering. The students are expected to expand their research and development skills in relevant topics, and gain skills and experience with finite element software for the solution to sophisticated problems associated with biomedical engineering and experimentation techniques for the validation of these problems. The unit will take a holistic approach to the learning outcomes: an overview of typical biomedical design problems, an overview of finite element analysis software, a detailed look at advanced finite element methods in biomedical applications, and a project-based learning approach to the development of a biomedical prosthesis. By the end of the unit, the students are expected to have familiarised themselves with design project management, analysis, optimisation, and validation for biomedical engineering problems.

Product development in the biomedical area presents unique challenges that need to be addressed to efficiently satisfy strict regulatory requirements and to successfully advance products to approval for marketing. Biomedical engineers need a broad understanding of these challenges as the main components of product development are complex and interdependent. Development of good manufacturing and quality control processes, preclinical and clinical validation of product safety and efficacy, and regulatory filings, are each progressive and interdependent processes. This UoS will provide a broad understanding of regulatory requirements for biomedical product development, with particular emphasis on the dependence of each component on the development of processes and control systems that conform to Good Manufacturing Practice. This UoS assumes prior knowledge of cell biology and chemistry and builds on that foundation to elaborate on the important aspects of biomedical product development.
The objectives are: 1. To gain a broad understanding of biomedical product development within the regulatory framework; 2. To understand the challenges and difficulties of Good Manufacturing Practice; 3. Understand the purpose and conduct of preclinical and clinical testing; 4. To understand how each of these components fit together to support regulatory filings.

Students will be given a good background in the physics of biological processes. Students will understand the differences between thermodynamically closed and open systems and its relevance to cells and other biological systems. Students will be provided with an introduction to the thermodynamics of irreversible and evolutionary processes of relevance to biology. Students will be introduced to the statistical mechanics of self assembly and equilibrium structures and its relevance to biology at the molecular level.

The aims and objectives of the unit of study are: 1. To introduce the student to the details and practice of orthopaedic engineering; 2. To give students an overview of the diverse knowledge necessary for the design and evaluation of implants used in orthopaedic surgery; 3. To enable students to learn the language and concepts necessary for interaction with orthopaedic surgeons and the orthopaedic implant industry; 4. To introduce the student to the details and practice of other engineering applications in surgery, particularly in the cardiovascular realm.

The capstone project requires the student to plan and execute a substantial research-based project, using their technical and communication skills to design, evaluate, implement, analyse and theorise about developments that contribute to professional practice thus demonstrating the achievement of AQF Level 9.
Students are required to carry out a defined piece of independent research in a setting and in a manner that fosters the development of engineering research skills. These skills include the capacity to define a research question, showing how it relates to existing knowledge, identifying the tools needed to investigate the question, carrying out the research in a systematic way, analysing the results obtained and presenting the outcomes in a report that is clear, coherent and logically structured. Capstone project is undertaken across two semesters of enrolment, in two successive Units of Study of 6 credits points each. Capstone Project A covers first steps of thesis research starting with development of research proposal. Project B covers the second of stage writing up and presenting the research results.
Students are asked to write a thesis based on a research project, which is very often related to some aspect of a staff member's research interests. Some projects will be experimental in nature, others may involve computer-based simulation, feasibility studies or the design, construction and testing of equipment. Direction of thesis work may be determined by the supervisor, however the student is expected to make a significant contribution to the direction of the project, and the student is responsible for the execution of the practical work and the general layout and content of the thesis itself. The final thesis must be the student's individual work, although research is sometimes conducted in the framework of a group project shared with others. Students undertaking research on this basis will need to take care in ensuring the individual quality of their own research work and the final thesis submission. The thesis will be judged on the extent and quality of the student's original work and particularly how critical, perceptive and constructive they have been in assessing thei work and that of others. Students will also be required to present the results of their findings to their peers and supervisors as part of a seminar program.
A thesis at this level will represent a contribution to professional practice or research, however the timeframe available for the thesis also needs to be considered when developing project scopes. Indeed, a key aim of the thesis is to specify a research topic that arouses sufficient intellectual curiosity, and presents an appropriate range and diversity of technical and conceptual challenges, while remaining manageable and allowing achievable outcomes within the time and resources available. It is important that the topic be of sufficient scope and complexity to allow a student to learn their craft and demonstrate their research skills. Equally imperative is that the task not be so demanding as to elude completion. Finally the ability to plan such a project to achieve results within constraints and the identification of promising areas and approaches for future research is a key assessment criterion.

The capstone project requires the student to plan and execute a substantial research-based project, using their technical and communication skills to design, evaluate, implement, analyse and theorise about developments that contribute to professional practice thus demonstrating the achievement of AQF Level 9.
Students are required to carry out a defined piece of independent research in a setting and in a manner that fosters the development of engineering research skills. These skills include the capacity to define a research question, showing how it relates to existing knowledge, identifying the tools needed to investigate the question, carrying out the research in a systematic way, analysing the results obtained and presenting the outcomes in a report that is clear, coherent and logically structured. Capstone project is undertaken across two semesters of enrolment, in two successive Units of Study of 6 credits points each. Capstone Project A covers first steps of thesis research starting with development of research proposal. Project B covers the second of stage writing up and presenting the research results.
Students are asked to write a thesis based on a research project, which is very often related to some aspect of a staff member's research interests. Some projects will be experimental in nature, others may involve computer-based simulation, feasibility studies or the design, construction and testing of equipment. Direction of thesis work may be determined by the supervisor, however the student is expected to make a significant contribution to the direction of the project, and the student is responsible for the execution of the practical work and the general layout and content of the thesis itself. The final thesis must be the student's individual work, although research is sometimes conducted in the framework of a group project shared with others. Students undertaking research on this basis will need to take care in ensuring the individual quality of their own research work and the final thesis submission. The thesis will be judged on the extent and quality of the student's original work and particularly how critical, perceptive and constructive they have been in assessing thei work and that of others. Students will also be required to present the results of their findings to their peers and supervisors as part of a seminar program.
A thesis at this level will represent a contribution to professional practice or research, however the timeframe available for the thesis also needs to be considered when developing project scopes. Indeed, a key aim of the thesis is to specify a research topic that arouses sufficient intellectual curiosity, and presents an appropriate range and diversity of technical and conceptual challenges, while remaining manageable and allowing achievable outcomes within the time and resources available. It is important that the topic be of sufficient scope and complexity to allow a student to learn their craft and demonstrate their research skills. Equally imperative is that the task not be so demanding as to elude completion. Finally the ability to plan such a project to achieve results within constraints and the identification of promising areas and approaches for future research is a key assessment criterion.

The capstone project requires the student to plan and execute a substantial research-based project, using their technical and communication skills to design, evaluate, implement, analyse and theorise about developments that contribute to professional practice thus demonstrating the achievement of AQF Level 9.
Students are required to carry out a defined piece of independent research in a setting and in a manner that fosters the development of engineering research skills. These skills include the capacity to define a research question, showing how it relates to existing knowledge, identifying the tools needed to investigate the question, carrying out the research in a systematic way, analysing the results obtained and presenting the outcomes in a report that is clear, coherent and logically structured. Capstone project is undertaken across two semesters of enrolment, in two successive Units of Study of 6 credits points each. Capstone Project A covers first steps of thesis research starting with development of research proposal. Project B covers the second of stage writing up and presenting the research results.
Students are asked to write a thesis based on a research project, which is very often related to some aspect of a staff member's research interests. Some projects will be experimental in nature, others may involve computer-based simulation, feasibility studies or the design, construction and testing of equipment. Direction of thesis work may be determined by the supervisor, however the student is expected to make a significant contribution to the direction of the project, and the student is responsible for the execution of the practical work and the general layout and content of the thesis itself. The final thesis must be the student's individual work, although research is sometimes conducted in the framework of a group project shared with others. Students undertaking research on this basis will need to take care in ensuring the individual quality of their own research work and the final thesis submission. The thesis will be judged on the extent and quality of the student's original work and particularly how critical, perceptive and constructive they have been in assessing thei work and that of others. Students will also be required to present the results of their findings to their peers and supervisors as part of a seminar program.
A thesis at this level will represent a contribution to professional practice or research, however the timeframe available for the thesis also needs to be considered when developing project scopes. Indeed, a key aim of the thesis is to specify a research topic that arouses sufficient intellectual curiosity, and presents an appropriate range and diversity of technical and conceptual challenges, while remaining manageable and allowing achievable outcomes within the time and resources available. It is important that the topic be of sufficient scope and complexity to allow a student to learn their craft and demonstrate their research skills. Equally imperative is that the task not be so demanding as to elude completion. Finally the ability to plan such a project to achieve results within constraints and the identification of promising areas and approaches for future research is a key assessment criterion.

To complete a substantial research project and successfully analyse a problem, devise appropriate experiments, analyse the results and produce a well-argued, in-depth thesis. The final research project should be completed and reported at a level which meets AQF level 9 outcomes and has original components as would be expected in MPhil.

To complete a substantial research project and successfully analyse a problem, devise appropriate experiments, analyse the results and produce a well-argued, in-depth thesis. The final research project should be completed and reported at a level which meets AQF level 9 outcomes and has original components as would be expected in MPhil.

This unit aims to teach fundamentals of modern numerical and analytical techniques for evaluating stresses, strains, deformations and strengths of representative aerospace structures. In particular the focus is on developing an understanding of: Fundamental concepts and formulations of the finite element methods for basic structural analysis; Elements for typical aerospace structures- such as beams/frames, plates/shells, and their applications and limitations; Finite element techniques for various types of problems pertinent to aerospace structures; and developing hands-on experience of using selected commercial finite element analysis program.
At the end of this unit of study the following will have been covered: Introduction to Finite Element Method for modern structural and stress analysis; One-dimensional rod elements; Generalization of FEM for elasticity; Two- and three-dimensional trusses; FEA for beams and frames in 2D and 3D; Two-dimensional problems using constant strain triangular elements; The two-dimensional isoparametric elements; Plates and shells elements and their applications; FEA for axisymmetric shells and pressure vessels, shells of revolution; FEA for axisymmetric solids subjected to axi-symmetric loading; FEA for structural dynamics, eigenvalue analysis, modal response, transient response; Finite element analysis for stress stiffening and buckling of beams, plates and shells; Three-dimensional problems in stress analysis; Extensions to the element library, higher order elements, special elements; Constraints; FEA modeling strategy; FEA for heat conduction; FEA for non-linear material and geometric analysis.

Objectives: To provide students with the necessary skills to use commercial Computational Fluid Dynamics packages and to carry out research in the area of Computational Fluid Dynamics. Expected outcomes: Students will have a good understanding of the basic theory of Computational Fluid Dynamics, including discretisation, accuracy and stability. They will be capable of writing a simple solver and using a sophisticated commercial CFD package.
Syllabus summary: A course of lectures, tutorials and laboratories designed to provide the student with the necessary tools for using a sophisticated commercial CFD package. A set of laboratory tasks will take the student through a series of increasingly complex flow simulations, requiring an understanding of the basic theory of computational fluid dynamics (CFD). The laboratory tasks will be complemented by a series of lectures in which the basic theory is covered, including: governing equations; finite difference methods, accuracy and stability for the advection/diffusion equation; direct and iterative solution techniques; solution of the full Navier-Stokes equations; turbulent flow; Cartesian tensors; turbulence models.

This course introduces atomistic computational techniques used in modern engineering to understand phenomena and predict material properties, behaviour, structure and interactions at nano-scale. The advancement of nanotechnology and manipulation of matter at the molecular level have provided ways for developing new materials with desired properties. The miniaturisation at the nanometre scale requires an understanding of material behaviour which could be much different from that of the bulk. Computational nanotechnology plays a growingly important role in understanding mechanical properties at such a small scale. The aim is to demonstrate how atomistic level simulations can be used to predict the properties of matter under various conditions of load, deformation and flow. The course covers areas mainly related to fluid as well as solid properties, whereas, the methodologies learned can be applied to diverse areas in nanotechnology such as, liquid-solid interfaces, surface engineering, nanorheology, nanotribology and biological systems. This is a course with a modern perspective for engineers who wish to keep abreast with advanced computational tools for material characterisation at the atomic scale.

The aim is to teach students in the undergraduate and postgraduate levels basic concepts about friction, lubrication and wear applicable to design and operation of mechanical systems used in engineering, industrial, and modern applications. Examples of these systems are lubrication of internal combustion engines, gearboxes, artificial hip/knee joints, and micro/nano electromechanical systems.

This unit introduces engineering design via optimisation, i.e. finding the "best possible" solution to a particular problem. For example, an autonomous vehicle must find the fastest route between two locations over a road network; a biomedical sensing device must compute the most accurate estimate of important physiological parameters from noise-corrupted measurements; a feedback control system must stabilise and control a multivariable dynamical system (such as an aircraft) in an optimal fashion.
The student will learn how to formulate a design in terms of a "cost function", when it is possible to find the "best" design via minimization of this "cost", and how to do so. The course will introduce widely-used optimisation frameworks including linear and quadratic programming (LP and QP), dynamic programming (DP), path planning with Dijkstra's algorithm, A*, and probabilistic roadmaps (PRMs), state estimation via Kalman filters, and control via the linear quadratic regulator (LQR) and Model Predictive Control (MPC). There will be constant emphasis on connections to real-world engineering problems in control, robotics, aerospace, biomedical engineering, and manufacturing.

The aim of this course is to enhance the student's manufacturing engineering skills in the CAD/CAM area. The course focuses on CNC milling as a manufacturing automation process applied to a project. The management, planning and marketing of a typical engineering project are also discussed.
Through integrated project-based learning and hands-on-machine training, you will learn: How to successfully complete a CAD/CAM and CNC mill based project; Manufacturing management and system skills, such as product planning, manufacturing sequence, time and cost; The science in designing and selecting a manufacturing method; How to effectively present your ideas and outcomes using oral and report based methods.
It is expected that through your hard work in the semester, you will find: Enhanced learning by real-world problems; Improved comprehensive skill in manufacturing design.

The objective of the course is to give students skills in the area of highly non-linear finite element analysis. Major topics covered include CAD, Implicit / explicit codes, Wire frame geometry, Elemental Theory, Materials, Pre-processing using ETA-PreSys, Contact, LS-Dyna, using NCAC FEM models, Modeling fasteners and the interaction between solids and fluids. Material covered in lectures is reinforced through independent research, assignments, quizzes and a major capstone project. The capstone project involves the development of an approved crash scenario.

Implantable microelectronic devices functioning either as nerve stimulators or nerve blockers comprise one of the largest markets in the global medical device industry. The aim of this unit of study is to give students a complete overview of the underlying technology (microelectronics, encapsulation biomaterials, electrode biomaterials, electrode-neural interactions, inductive power systems and data links, signal processing) and an expert review of the major technological applications on the market, which include Cochlear implants, pacemakers and implantable defibrillators, deep brain stimulators, pain control nerve blockers, bionic eye implants, functional electrical stimulation systems. The unit will also review emerging applications such as gastrointestinal disorders, obesity; vagal nerve stimulation- epilepsy, depression, carotid artery stimulation- hypertension, spinal cord stimulation- ischemic disorders, angina, peripheral vascular disease, incontinence, erectile dysfunction. The unit will conclude with a snapshot of the future: "brain on a chip" progress, nerve regrowth, neurotropins, drug/device combinations. This is a Master of Professional Engineering unit of study intended for biomedical engineering students with an interest in working in the medical device industry in the large market sector area of implantable electronic devices.

"Membrane Science" provides background in the physics and electrochemistry of a variety of synthetic membranes used in industry as well as cellular membranes. The course aims to provide students with an understand of: membrane self-assembly and manufacture; membrane separation processes such as filtration, desalination, ion exchange and water-splitting; and techniques for membrane characterisation and monitoring.

This course will give students an insight into the use of (computer-based) statistical techniques in extracting information from experimental data obtained from real life bio-physical systems. The issues and techniques required for mathematical modeling as well as monitoring and/or control scheme for bio-physical systems will be discussed and implemented in diverse range of bioprocesses, including biomaterials and fermentation products.
We will review statistical distribution; tests based on z, t, F variables; calculation of confidence intervals; hypothesis testing; linear and nonlinear regression; analysis of variance; principal component analysis; and use of computer-based statistical tools. The issues associated with dynamic response of bio-physical processes; inferred or estimated variables; control system design and implementation; introduction to model-based control; use of computer-based control system design and analysis tools will be elaborated.
When this course is successfully completed you will acquire knowledge to choose the appropriate statistical techniques within a computer based environment, such as Excel or MATLAB, for a given situation. The students will also obtain potential for monitoring/control scheme based on the key dynamic features of the process. Such information would be beneficial for any future career in Bio-manufacturing companies. Students are encouraged to promote an interactive environment for exchange of information.

The objectives of the course are to provide students with an overview of biochemical and pharmaceutical industry. It will give students an insight into drug delivery systems and formulation; how therapeutic drugs work; and a general overview of biochemical and pharmaceutical marketing. The design and management of clinical trials, which are key factors for development of any new therapeutic agent will also be covered in the course. The challenges for commercialisation of innovative methods and/or biochemical and pharmaceutical products and aspects of intellectual property protection will be elaborated. Ultimately the aspects of Good Manufacturing Practice (GMP) and international legislation for marketing pharmaceutical products will be illuminated. Lectures in this course will be delivered by both University of Sydney staff and by a number of visiting professional representatives from industry and government agencies. We will also arrange a site visit for a bio-manufacturing company as warranted.
When you successfully complete this course you acquire knowledge about drug formulation, pharmaceutical processing including physical processes, legislation governing the bio-manufacturing and commercialisation of biochemicals and pharmaceuticals. The information would be beneficial for your future career in pharmaceutical manufacturing companies. Students are encouraged to engage in an interactive environment for exchange of information. This course will be assessed by quizzes, assignments, oral presentation and final report.This unit of study is offered as an advanced elective unit of study to final year undergraduate students. Students may be required to attend lectures off-campus.

This unit will cover advanced topics in the application of electronics and signal processing to physiological monitoring, biosensors, electrical stimulation and medical imaging. Electrical safety and regulations of medical devices in Australia will be introduced. Guest lectures will describe the different needs and requirements in several clinical areas including neonatal care, oncology, cardiology and neurology.
Assumed Knowledge: A strong foundation in control, signal processing and electronic devices and circuits is assumed including a knowledge of analogue and digital transistor operation, circuit building blocks such as the differential pair and current mirror, AC circuit analysis, Fourier analysis.

The purpose of this unit is to enable students to undertake an overseas learning activity during the university's summer or winter break while completing a Masters degree in either Engineering, Professional Engineering, Information Technologies or Project Management. The learning activity may comprise either a short project under academic or industry supervision or summer or winter school unit of study at an approved overseas institution. The learning activity should demonstrate outcomes and workload equivalent to a 6 credit point Master's level unit in the student's current award program.
Students may enrol in this unit with permission from the school and the Sub-Dean Students for the Faculty of Engineering and Information Technologies.

The purpose of this unit is to enable students to undertake an overseas learning activity during the university's summer or winter break while completing a Masters degree in either Engineering, Professional Engineering, Information Technologies or Project Management. The learning activity may comprise either a short project under academic or industry supervision or summer or winter school unit of study at an approved overseas institution. The learning activity should demonstrate outcomes and workload equivalent to a 6 credit point Master's level unit in the student's current award program.
Students may enrol in this unit with permission from the school and the Sub-Dean Students for the Faculty of Engineering and Information Technologies.

Develop advanced knowledge and skills in diagnostic analyses of materials failure using advanced techniques; enhance students' ability in handling complex engineering cases using interdisciplinary technologies; and provide students an opportunity to understand project research.
Students will attend a series lectures on failure analyses of engineering materials addressing brittle rupture/fracture, yielding, cleavage fracture, fatigue and creep failure of engineering materials under static and dynamic loads. Students will also attend short introduction courses on optical microscopy and scanning electron microscopy (SEM) to gain some essential knowledge in diagnostic and forensic analyses of materials failure. Each student participates in a couple of group projects relevant to diagnostic analyses of failure of typical engineering materials such as steel, aluminium, magnesium alloys, engineering plastics and advanced fibre composites. Under the guidance of the supervisor, the student will learn how to initiate a proposal on failure analysis, how to do the project investigation and how to prepare and carry out technical communications (oral presentation and discussion between groups). In any of these scenarios, the student is directly responsible for the progress and quality of the results. At the end of the semester, the student is required to submit a written project report and to give a seminar presenting the aims and achievements of the project.

Develop an essential understanding of structure-property relationship of smart materials, as well as their applications in practical applications; develop student's capability to design functional structures using smart materials; and provide students an opportunity to learn the new knowledge through project approaches.
The unit of study covers the key knowledge of most smart materials such as dielectric, piezoelectric, magneto-electric and shape memory materials. Each student participates in a couple of group projects relevant to characterisation of structure-property relationship of functional structures with desired performance. Under the guidance of the supervisor, students will learn how to develop a proposal, how to do the project investigation and how to prepare and carry out the technical communications (writing and oral). In any of these scenarios, the student is directly responsible for the progress and quality of the results. At the end of the semester, the student is required to submit a written project report and to give a seminar presenting the aims and achievements of the project.

To understand (a) how to define the relationship between properties and microstructures of advanced engineering materials, (b) how to improve mechanical design with the knowledge of mechanics and properties of materials, and (c) how to conduct failure diagnosis of engineering materials.
Advanced polymer matrix composites, smart/functional materials, high-strength ferrous and non ferrous alloys, superalloys, high performance polymers, eco-materials, thin film science and technology, advanced joining methods, processing-structure-property relationship, damage tolerance, toughening mechanisms, structure integrity and reliability.

This UoS utilises assumed theoretical knowledge and skills to elucidate the stresses and strains that exit in the different categories of machine parts. It sets out to make the students familiar with the simplifications that are applied to arrive at the analytic expressions commonly used to analyse each individual categories parts. These simplifications usually begin by assuming that only particular types of loads are carried by teh parts in that category. The resulting analyses provide approximations to the actual stresses. It is possible to have different degrees of simplifications, requiring more or less work, giving better or poorer approximations. Should a part be used to carry loads that were not allowed for in the traditional method then some more appropriate method must be found or developed. An important aspect is to make the student practiced in a range of modern concepts, techniques and tools, and to be made aware of their strengths and limitations.
This unit of study teaches the student how to recognise where and how their theoretical skills can be applied to the practical situations that they may encounter in this field of design.
Options may be provided in the choice of design assignments. Biomedical engineering and vehicle design problems may be provided as options to more general machine design problems.

Syllabus Summary: This course starts by providing a background to the signals and transforms required to understand modern sensors. It goes on to provide an overview of the workings of typical active sensors (Radar, Lidar and Sonar). It provides insight into basic sensing methods as well as aspects of interfacing and signal processing. It includes both background material and a number of case studies.
The course covers the following topics: a) SIGNALS: Convolution, The Fourier Transform, Modulation (FM, AM, FSK, PSK etc), Frequency shifting (mixing); b) PASSIVE SENSORS: Infrared Radiometers, Imaging Infrared, Passive Microwave Imaging, Visible Imaging & Image Intensifiers; c) ACTIVE SENSORS THE BASICS: Operational Principles, Time of flight (TOF) Measurement and Imaging of Radar, Lidar and Sonar, Radio Tags and Transponders, Range Tacking, Doppler Measurement, Phase Measurement; d) SENSORS AND THE ENVIRONMENT: Atmospheric Effects, Target Characteristics, Clutter Characteristics, Multipath; e) ACTIVE SENSORS: ADVANCED TECHNIQUES: Probability of Detection, Angle Measurement and Tracking, Combined Range/Doppler and Angle Tracking, Frequency Modulation and the Fast Fourier Transform, High Range Resolution, Wide Aperture Methods, Synthetic Aperture Methods (SAR)
Objectives: The course aims to provide students with a good practical knowledge of a broad range of sensor technologies, operational principles and relevant signal processing techniques.
Expected Outcomes: A good understanding of active sensors, their outputs and applicable signal processing techniques. An appreciation of the basic sensors that are available to engineers and when they should be used.

This unit aims to present a broad overview of the technologies associated with industrial and mobile robots. Major topics covered are sensing, mapping, navigation and control of mobile robots, and kinematics and control of industrial robots. The subject consists of a series of lectures on robot fundamentals and case studies on practical robot systems. Material covered in lectures is illustrated through experimental laboratory assignments. The objective of the course is to provide students with the essential skills necessary to be able to develop robotic systems for practical applications.
At the end of this unit students will: be familiar with sensor technologies relevant to robotic systems; understand conventions used in robot kinematics and dynamics; understand the dynamics of mobile robotic systems and how they are modeled; have implemented navigation, sensing and control algorithms on a practical robotic system; apply a systematic approach to the design process for robotic systems; understand the practical application of robotic systems in manufacturing, automobile systems and assembly systems; develop the capacity to think critically and independently about new design problems; undertake independent research and analysis and to think creatively about engineering problems.
Course content will include: history and philosophy of robotics; hardware components and subsystems; robot kinematics and dynamics; sensors, measurements and perception; robotic architectures, multiple robot systems; localisation, navigation and obstacle avoidance, robot planning; robot learning; robot vision and vision processing.