An exchange component unit for students going on an International Exchange Program.

An exchange component unit for students going on an International Exchange Program.

An exchange component unit for students going on an International Exchange Program

An exchange component unit for students going on an International Exchange Program

An exchange component unit for students going on an International Exchange Program

An exchange component unit for students going on an International Exchange Program

An exchange component unit for students going on an International Exchange Program

An exchange component unit for students going on an International Exchange Program

AMME1362 is an introductory unit in engineering materials. The unit aims to develop students' understanding of the structures, mechanical properties and manufacture of a range of engineering materials as well as how the mechanical properties relate to microstructure and forming and treatment methods. The unit has no prerequisite subject and is therefore intended for those with little or no previous background in engineering materials. However the unit does require students to take a significant degree of independent responsibility for developing their own background knowledge of materials and their properties. The electrical, magnetic, thermal and optical properties of materials are a critical need-to-know area where students are expected to do some independent study.

This unit of study introduces students to the fundamentals of biomedical engineering. Lecture material is organized into four strands: Introduction to Biomedical Engineering, Introduction to Human Biology, Biomechanics and Biomedical Design. Lecture topics include an overview of the Biomedical Engineering Industry, medical device technology including the various Biomedical Technologies in the global market and under development, key industry players in the medical device industry, fundamental human biology, engineering mechanics with a focus on the biomechanics of the human body, and the basics of biomedical design through engineering drawing. Introductory lectures and computer tutorials on engineering drawing and design will serve as fundamental knowledge for intermediate units in the field, give students a useful working grasp of engineering drawing and design essential for all practising engineers and is a pre-requisite for the senior core unit MECH3660 Manufacturing Engineering. Weekly lectures on the fundamentals of human biology and the key anatomical systems prepare students for MECH2901 Anatomy and Physiology for Engineers. Weekly lectures and tutorials on engineering mechanics with a biomechanics and biomedical design focus give students a good grounding in biomechanics which will serve as fundamental knowledge for intermediate units in the field and to give all students a useful working grasp of engineering mechanics, the basis of biomechanics, as a pre-requisite for the senior core unit MECH4961 Biomechanics and Biomaterials.

This core junior unit provides an introduction to the relatively recent, and rapidly growing, biotechnology industry, with a focus on the current key commercial applications. Biotechnology can be broadly defined as the commercial exploitation of biological processes for industrial and other purposes. A significant focus for commercial activities has been GM (genetically modified) technology: GM microorganisms, plants, animals, and even humans (gene therapy). The 'biotech industry' arose rapidly in the late 20th century, and is now one of the largest industries in the world, and is one of the cornerstones of the global biomedical industry which comprises three main sectors: Medical Devices, Pharmaceuticals, and Biotechnology. Significant global commercial biotechnology activity concerns the manufacture of therapeutic compounds from GM microorganisms using bioreactors, for example insulin. Another significant sector is agricultural: 'agri-biotech' which concerns GM higher lifeforms (plants and animals) primarily for the food industry, and also other industries such as the energy industry (biofuels). The third sector concerns therapeutic GM of humans, known as 'gene-therapy'. Some other important biotechnologies will also be explored including monoclonal antibodies, genome sequencing and personalized medicine, and RNA-interference technology (RNAi).This unit of study provides an overview of the rise of the biotechnology industry, and key corporations and their products. It then provides a historical and technological overview of the developments on which the biotechnology industry is based: fermentation, bioreactors, process analysis and automation, genome sequencing, GM (genetic modification) technology, monoclonal antibodies. The unit then explores some industrially significant case studies.

This course is designed to provide students with the necessary tools for mathematically modelling and solving problems in engineering. Solution methods will be considered for a range of standard engineering problems including; Conduction heat transfer in one and two dimensions, hydrostatics and hydrodynamic balance for internal and external flows, spring/mass systems, vibration and stability problems. The focus will be on real problems and numerical solution methods and will include separation of variables; Fourier series and Fourier transforms; Laplace transforms; scaling and finite differences.

This unit aims to teach the basic laws of thermodynamics and the fundamentals of fluid statics and dynamics. At the end of this unit students will have: an understanding of the basic laws of thermodynamics and basic equations governing the statics and dynamics of fluids; the ability to analyze the thermodynamics of a simple open or closed engineering system; the ability to analyze and determine the forces governing static fluid; the ability to evaluate the relevant flow parameters for fluid flow in internal engineering systems such as pipes and pumps (velocities, losses, etc.) and external systems such as flow over wings and airfoils (lift and drag). Course content will include concepts of heat and work, properties of substances, first law of thermodynamics, control mass and control volume analysis, thermal efficiency, entropy, second law of thermodynamics, reversible and irreversible processes, isentropic efficiency, power and refrigeration cycles; basic concepts of pressure, force, acceleration, continuity, streamline and stream function, viscosity, non-dimensional parameters; Fluid statics: governing hydrostatic equations, buoyancy; Fluid dynamics: governing conservation equations; Potential flow, vorticity and circulation; Bernouilli and Euler equations; A brief introduction to flow measuring devices, pipe flow, flow over surfaces, lift and drag.

This unit covers the fundamentals of fluid statics and fluid dynamics. At the end of this unit students will have: an understanding of the basic equations governing the statics and dynamics of fluids; the ability to analyze and determine the forces applied by a static fluid; the ability to analyse fluids in motion. The course will cover both inviscid and viscous fluid flow. The course will introduce the relevant parameters for fluid flow in internal engineering systems such as pipes and pumps and external systems such as flow over wings and airfoils. Course content will cover the basic concepts such as viscosity, density, continuum, pressure, force, buoyancy and acceleration; and more detailed methods including continuity, conservation of momentum, streamlines and potential flow theory, Bernoulli equation, Euler equation, Navier-Stokes equation. Experiments will introduce flow measuring devices and flow observation.

This unit aims to teach the basic laws of thermodynamics and heat transfer. At the end of this unit students will have: an understanding of the basic laws of thermodynamics and heat transfer; The ability to analyze the thermodynamics of a simple open or closed engineering system. The basic knowledge to analyse and design 1D thermal circuits. Course content will include concepts of heat and work, properties of substances, first law of thermodynamics, control mass and control volume analysis, thermal efficiency, entropy, second law of thermodynamics, reversible and irreversible processes, isentropic efficiency, power and refrigeration cycles, heat transfer by conduction, convection and radiation, 1D thermal circuits and transient heat transfer.

Equilibrium of deformable structures; basic concept of deformation compatibility; stress and strain in bars, beams and their structures subjected to tension, compression, bending, torsion and combined loading; statically determinate and indeterminate structures; energy methods for bar and beam structures; simple buckling; simple vibration; deformation of simple frames and cell box beams; simple two-dimensional stress and Morh's circle; problem-based applications in aerospace, mechanical and biomedical engineering.

This unit of study aims to teach: Dynamics of Rigid Bodies: Analysis of Planar mechanisms; Kinematics of rigid bodies; Kinetics of rigid bodies. Students will also develop their skills in: how to model and analyse dynamic systems and the application of theory to real systems through practical/laboratory sessions.



At the end of this unit students will have developed skills in modelling and analysing planar mechanisms and rigid body dynamic systems.



Course content will include planar mechanisms, linkages, mobility; instant centres of rotation, Kennedy's theorem; velocity and acceleration polygons; kinematics of rigid bodies, frames of reference, velocity and acceleration, rotating frame of reference, relative velocity and acceleration, gyroscopic acceleration; kinetics of rigid bodies, linear momentum and Euler's first law; angular momentum and Euler's second law; centre of mass; moments of inertia, parallel axis and parallel plane theorems, principal axes and principal moments of inertia, rotation about an axis; impulse and momentum; work and energy, kinetic and potential energies; applications to orbital and gyroscopic motion; introduction to Lagrangian methods.

This unit aims to develop in students an understanding of the engineering measurements and instrumentation systems. The students will acquire an ability to make accurate and meaningful measurements. It will cover the general areas of electrical circuits and mechanical/electronic instrumentation for strain, force, pressure, moment, torque, displacement, velocity, acceleration, temperature and so on.

This unit is the third of the four Biomedical Engineering foundational units. The first (AMME1960 Biomedical Engineering 1A) introduces students to the discipline of biomedical engineering, introducing the key concepts of biomedical technology, design, biomechanics, and the key systems of the human body from a biomedical engineering perspective. The second (AMME1961 Biomedical Engineering 1B) is an introduction to Biotechnology. The fourth (MECH2901 Anatomy and Physiology for Engineers) provides a hands-on anatomy and physiology study of the key systems of the human body from a biomedical engineering perspective, and includes cadaver laboratories. This unit complements MECH2901, providing a theoretical process-based study of the key physiological mechanisms of the human body, from a biomedical engineering perspective, using 5 key case studies: electrocardiography (ECG), electroencephalography (EEG), thermal homeostasis, local drug diffusion into body tissues, and systemic drug metabolism. In all five case studies, a physically based problem solving approach will be used to cover the material.

This course will address the use of state of the art engineering software packages for the solution of advanced problems in engineering. We will cover the solution of partial differential equations in heat transfer; fluids, both inviscid and viscous, and solids, including plates, shells and membranes. While some analytical methods will be considered, the primary focus of the course will be on the use of numerical solution methods, including finite difference, finite volume and spectral methods. Commercial engineering packages will be introduced with particular attention given to the development of standards for the accuracy and representation of data.

Supervised project on a relevant engineering discipline.

This unit of study aims to allow students to develop an understanding of methods for modeling and controlling linear, time-invariant systems. Techniques examined will include the use of differential equations and frequency domain approaches to modeling of systems. This will allow students to examine the response of a system to changing inputs and to examine the influence of external stimuli such as disturbances on system behaviour. Students will also gain an understanding of how the responses of these mechanical systems can be altered to meet desired specifications and why this is important in many engineering problem domains. The study of control systems engineering is of fundamental importance to most engineering disciplines, including Electrical, Mechanical, Mechatronic and Aerospace Engineering. Control systems are found in a broad range of applications within these disciplines, from aircraft and spacecraft to robots, automobiles, computers and process control systems. The concepts taught in this course introduce students to the mathematical foundations behind the modelling and control of linear, time-invariant dynamic systems. In particular, topics addressed in this course will include: 1) Techniques for modelling mechanical systems and understanding their response to control inputs and disturbances. This will include the use of differential equations and frequency domain methods as well as tools such as Root Locus and Bode plots. 2) Representation of systems in a feedback control system as well as techniques for determining what desired system performance specifications are achievable, practical and important when the system is under control. 3) Theoretical and practical techniques that help engineers in designing control systems, and an examination of which technique is best in solving a given problem.

Students spend 6 months at an industrial placement working on a major engineering project relevant to their engineering stream. This is a 24 credit point unit, which may be undertaken as an alternative to AMME4100 Practical Experience, AMME4111/4112 Honours Thesis A and B, MECH4601 Professional Engineering 2 and a recommended elective.



This unit of study gives students experience in carrying out a major project within an industrial environment, and in preparing and presenting detailed technical reports (both oral and written) on their work. The project is carried out under joint University/industry supervision, with the student essentially being engaged fulltime on the project at the industrial site.

Supervised project on a relevant engineering discipline.

The fourth year honours thesis aims to provide students with the opportunity to carry out a defined piece of independent research in a setting and in a manner that fosters the development of engineering research skills. These skills include the capacity to define a research question, showing how it relates to existing knowledge, identifying the tools needed to investigate the question, carrying out the research in a systematic way, analysing the results obtained and presenting the outcomes in a report that is clear, coherent and logically structured. Honours thesis is undertaken across two semesters of enrolment, in two successive Units of Study of 6 credits points each. Honours Thesis A covers first steps of thesis research starting with development of research proposal. Thesis B covers the second of stage writing up and presenting the research results. Students are asked to write a thesis based on a research project, which is very often related to some aspect of a staff member's research interests. Some projects will be experimental in nature, others may involve computer-based simulation, feasibility studies or the design, construction and testing of equipment. Direction of thesis work may be determined by the supervisor or be of an original nature, but in either case the student is responsible for the execution of the practical work and the general layout and content of the thesis itself. The final thesis must be the student's individual work, although research is sometimes conducted in the framework of a group project shared with others. Students undertaking research on this basis will need to take care in ensuring the individual quality of their own research work and the final thesis submission. The thesis will be judged on the extent and quality of the student's original work and particularly how critical, perceptive and constructive he or she has been in assessing his/her work and that of others. Students will also be required to present the results of their findings to their peers and supervisors as part of a seminar program. It is not expected that a thesis at this level will represent a significant contribution to new knowledge; nor is it expected that theses will resolve great intellectual problems. The timeframe available for the thesis is simply too short to permit students to tackle complex or difficult problems. Indeed, a key aim of the thesis is to specify a research topic that arouses sufficient intellectual curiosity, and presents an appropriate range and diversity of technical and conceptual challenges, while remaining manageable and allowing achievable outcomes within the time and resources available. It is important that the topic be of sufficient scope and complexity to allow a student to learn their craft and demonstrate their research skills. Equally imperative is that the task not be so demanding as to elude completion.

The fourth year honours thesis aims to provide students with the opportunity to carry out a defined piece of independent research or design work in a setting and in a manner that fosters the development of engineering skills in research or design. These skills include the capacity to define a research or design question, showing how it relates to existing knowledge, identifying the tools needed to investigate the question, carrying out the research or design in a systematic way, analysing the results obtained and presenting the outcomes in a report that is clear, coherent and logically structured. Honours thesis is undertaken across two semesters of enrolment, in two successive Units of Study of 6 credits points each. Honours Thesis A covers first steps of thesis research starting with development of research proposal. Thesis B covers the second of stage writing up and presenting the research results.



Students are asked to write a thesis based on a research or major design project, which is very often related to some aspect of a staff member's research interests. Some projects will be experimental in nature, others may involve computer-based simulation, feasibility studies or the design, construction and testing of equipment. Direction of thesis work may be determined by the supervisor or be of an original nature, but in either case the student is responsible for the execution of the practical work and the general layout and content of the thesis itself. The final thesis must be the student's individual work, although research is sometimes conducted in the framework of a group project shared with others. Students undertaking research on this basis will need to take care in ensuring the individual quality of their own research work and the final thesis submission. The thesis will be judged on the extent and quality of the student's original work and particularly how critical, perceptive and constructive he or she has been in assessing his/her work and that of others. Students will also be required to present the results of their findings to their peers and supervisors as part of a seminar program.



It is not expected that a thesis at this level will represent a significant contribution to new knowledge; nor is it expected that theses will resolve great intellectual problems. The time frame available for the thesis is simply too short to permit students to tackle complex or difficult problems. Indeed, a key aim of the thesis is to specify a research or design topic that arouses sufficient intellectual curiosity, and presents an appropriate range and diversity of technical and conceptual challenges, while remaining manageable and allowing achievable outcomes within the time and resources available. It is important that the topic be of sufficient scope and complexity to allow a student to learn their craft and demonstrate their research or design skills. Equally imperative is that the task not be so demanding as to elude completion.

To complete the research requirement for their engineering degree, students now have a choice of either completing Honours Thesis A/B (AMME 4111/AMME4112) or Project A/B (AMME 4121/AMME4122). Project A/B is intended to be more practical in orientation while Thesis A/B demands extensive literature review and critical analysis of outcomes. Honours Thesis is a program for individuals whereas Projects can be done by groups or by an individual. Engineering Project A/B is undertaken across two semesters of enrolment, in two successive Units of Study of 6 credits points each. Engineering Project A covers first steps of project work, starting with development of project proposal. Project B covers the second of stage writing up and presenting the project results.



The fourth year engineering project aims to provide students with the opportunity to carry out a defined piece of independent design work in a setting and in a manner that fosters the development of engineering design skills. These skills include the capacity to define a engineering design problem, showing how it relates to prior art, identifying appropriate tools and methods, carrying out a design in a systematic way and presenting outcomes in a report that is clear, coherent and logically structured.

To complete the research requirement for their engineering degree, students now have a choice of either completing Honours Thesis A/B (AMME 4111/AMME4112) or Project A/B (AMME 4121/AMME4122). Project A/B is intended to be more practical in orientation while Thesis A/B demands extensive literature review and critical analysis of outcomes. Honours Thesis is a program for individuals whereas Projects can be done by groups or by an individual. Engineering Project A/B is undertaken across two semesters of enrolment, in two successive Units of Study of 6 credits points each. Engineering Project A covers first steps of project work, starting with development of project proposal. Project B covers the second of stage writing up and presenting the project results.



The fourth year engineering project aims to provide students with the opportunity to carry out a defined piece of independent design work in a setting and in a manner that fosters the development of engineering design skills. These skills include the capacity to define a engineering design problem, showing how it relates to prior art, identifying appropriate tools and methods, carrying out a design in a systematic way and presenting outcomes in a report that is clear, coherent and logically structured.

This unit of study introduces students to vision sensors, computer vision analysis and digital image processing. This course will cover the following areas: fundamental principles of vision sensors such as physics laws, radiometry, CMOS/CDD imager architectures, colour reconstruction; the design of physics-based models for vision such as reflectance models, photometric invariants, radiometric calibration. This course will also present algorithms for video/image analysis, transmission and scene interpretation. Topics such as image enhancement, restoration, stereo correspondence, pattern recognition, object segmentation and motion analysis will be covered.

Biomechatronics is the application of mechatronic engineering to human biology and as such it forms an important subset of the overall biomedical engineering discipline. This course focusses on a number of areas of interest including auditory and optical prostheses, artificial hearts and active and passive prosthetic limbs and examines the biomechatronic systems (hardware and signal processing) that underpin their operation

Core Unit of Study: With the severe worldwide shortage of donor organs and the ubiquitous problem of donor organ rejection, there is a strong need for developing technologies for engineering replacement organs and other body parts. Recent developments in biochemistry and cell biology have begun to make this possible, and as a consequence, the very new field of tissue engineering has been making dramatic progress in the last few years.
This UoS will provide an introduction to the principles of tissue engineering, as well as an up to date overview of recent progress in the field of tissue engineering is and where it is going. This UoS assumes prior knowledge of cell biology and chemistry and builds on that foundation to elaborate on the important aspects of tissue engineering. The objectives are:
1. To gain a basic understanding of the major areas of interest in tissue engineering
2. To learn to apply basic engineering principles to tissue engineering systems
3. To understand the challenges and difficulties of tissue engineering.
4. Understand the ethical issues of stem cell applications.
5. Practical classes in the preparation and evaluation of scaffolds for tissue regeneration.
6. Enable student to access web-based resources in tissue engineering (for example: Harvard-MIT Principles and Practice of Tissue Engineering).
7. Research basic skills in Tissue Engineering.

Computer modelling and simulation signify a very important aspect of engineering in general, and biomedical engineering specifically. This is because it allows overcoming some significant problems of clinical, ethical, and design involved in testing early prototypes on live subjects. This unit of study will take a project-based-learning approach to the topic of computer modelling and simulation for design optimization of biomedical prostheses and devices through lectures, tutorials, team work and research seminars. The primary focus will be on CT/MRI based finite element modelling, design analysis and optimisation for biomedical implantable devices. The students will form into teams and use computer modeling and simulation techniques to develop and optimize their design. Projects are to be conducted for some real-life problems from the biomedical industry, and it is anticipated that students will spend a significant amount of time with their research and development. It is anticipated that students will gain detailed knowledge not only in the design topic assigned to them, but also in the topics assigned to their peers.

Elective Unit of Study: Product development in the biomedical area presents unique challenges that need to be addressed to efficiently satisfy strict regulatory requirements and to successfully advance products to approval for marketing. Biomedical engineers need a broad understanding of these challenges as the main components of product development are complex and interdependent. Development of good manufacturing and quality control processes, preclinical and clinical validation of product safety and efficacy, and regulatory filings, are each progressive and interdependent processes. This UoS will provide a broad understanding of regulatory requirements for biomedical product development, with particular emphasis on the dependence of each component on the development of processes and control systems that conform to Good Manufacturing Practice. This UoS assumes prior knowledge of cell biology and chemistry and builds on that foundation to elaborate on the important aspects of biomedical product development.

Supply of medical devices, diagnostics and related therapeutic products is regulated in most jurisdictions, with sophisticated and complex regulatory regimes in all large economies. These regulations are applied both to manufacturers and designers and to biomedical engineers undertaking device custom manufacture or maintenance in clinical environments. This UoS will explore the different regulatory frameworks in the "Global Harmonisation Task Force" group of jurisdictions (US, EU, Canada, Japan, Australia) as well as emerging regulatory practices in Asia and South America. Emphasis will be on the commonality of the underlying technical standards and the importance of sophisticated risk management approaches to compliance.

The capstone project aims to provide students with the opportunity to carry out a defined piece of independent research in a setting and in a manner that fosters the development of engineering research skills. These skills include the capacity to define a research question, showing how it relates to existing knowledge, identifying the tools needed to investigate the question, carrying out the research in a systematic way, analysing the results obtained and presenting the outcomes in a report that is clear, coherent and logically structured. Capstone project is undertaken across two semesters of enrolment, in two successive Units of Study of 6 credits points each. Capstone Project A covers first steps of thesis research starting with development of research proposal. Project B covers the second of stage writing up and presenting the research results.
Students are asked to write a thesis based on a research project, which is very often related to some aspect of a staff member's research interests. Some projects will be experimental in nature, others may involve computer-based simulation, feasibility studies or the design, construction and testing of equipment. Direction of thesis work may be determined by the supervisor or be of an original nature, but in either case the student is responsible for the execution of the practical work and the general layout and content of the project itself. The final capstone report must be the student's individual work, although research is sometimes conducted in the framework of a group project shared with others. Students undertaking research on this basis will need to take care in ensuring the individual quality of their own research work and the final submission. The report will be judged on the extent and quality of the student's original work and particularly how critical, perceptive and constructive he or she has been in assessing his/her work and that of others. Students will also be required to present the results of their findings to their peers and supervisors as part of a seminar program.
It is not expected that a project at this level will represent a significant contribution to new knowledge; nor is it expected that projects will resolve great intellectual problems. The timeframe available for the project is simply too short to permit students to tackle complex or difficult problems. Indeed, a key aim of the thesis is to specify a research topic that arouses sufficient intellectual curiosity, and presents an appropriate range and diversity of technical and conceptual challenges, while remaining manageable and allowing achievable outcomes within the time and resources available. It is important that the topic be of sufficient scope and complexity to allow a student to learn their craft and demonstrate their research skills. Equally imperative is that the task not be so demanding as to elude completion.

The capstone project aims to provide students with the opportunity to carry out a defined piece of independent research in a setting and in a manner that fosters the development of engineering research skills. These skills include the capacity to define a research question, showing how it relates to existing knowledge, identifying the tools needed to investigate the question, carrying out the research in a systematic way, analysing the results obtained and presenting the outcomes in a report that is clear, coherent and logically structured. Capstone project is undertaken across two semesters of enrolment, in two successive Units of Study of 6 credits points each. Capstone Project A covers first steps of thesis research starting with development of research proposal. Project B covers the second of stage writing up and presenting the research results.
Students are asked to write a thesis based on a research project, which is very often related to some aspect of a staff member's research interests. Some projects will be experimental in nature, others may involve computer-based simulation, feasibility studies or the design, construction and testing of equipment. Direction of thesis work may be determined by the supervisor or be of an original nature, but in either case the student is responsible for the execution of the practical work and the general layout and content of the project itself. The final capstone report must be the student's individual work, although research is sometimes conducted in the framework of a group project shared with others. Students undertaking research on this basis will need to take care in ensuring the individual quality of their own research work and the final submission. The report will be judged on the extent and quality of the student's original work and particularly how critical, perceptive and constructive he or she has been in assessing his/her work and that of others. Students will also be required to present the results of their findings to their peers and supervisors as part of a seminar program.
It is not expected that a project at this level will represent a significant contribution to new knowledge; nor is it expected that projects will resolve great intellectual problems. The timeframe available for the project is simply too short to permit students to tackle complex or difficult problems. Indeed, a key aim of the thesis is to specify a research topic that arouses sufficient intellectual curiosity, and presents an appropriate range and diversity of technical and conceptual challenges, while remaining manageable and allowing achievable outcomes within the time and resources available. It is important that the topic be of sufficient scope and complexity to allow a student to learn their craft and demonstrate their research skills. Equally imperative is that the task not be so demanding as to elude completion.

The Capstone Project aims to provide students with the opportunity to carry out a defined piece of independent research or design work in a setting and in a manner that fosters the development of engineering skills in research or design. These skills include the capacity to define a research or design question, showing how it relates to existing knowledge, identifying the tools needed to investigate the question, carrying out the research or design in a systematic way, analysing the results obtained and presenting the outcomes in a report that is clear, coherent and logically structured. Capstone Project is undertaken across two semesters of enrolment, in two successive Units of Study of 6 credits points each. Capstone Project A covers first steps of thesis research starting with development of research proposal. Capstone Project B Extended covers the second of stage writing up and presenting the research results. This extended version of Capstone Project allows the student to investigate a topic of greater depth and scope.
Students are asked to write a thesis based on a research project, which is very often related to some aspect of a staff member's research interests. Some projects will be experimental in nature, others may involve computer-based simulation, feasibility studies or the design, construction and testing of equipment. Direction of thesis work may be determined by the supervisor or be of an original nature, but in either case the student is responsible for the execution of the practical work and the general layout and content of the project itself. The final capstone report must be the student's individual work, although research is sometimes conducted in the framework of a group project shared with others. Students undertaking research on this basis will need to take care in ensuring the individual quality of their own research work and the final submission. The report will be judged on the extent and quality of the student's original work and particularly how critical, perceptive and constructive he or she has been in assessing his/her work and that of others. Students will also be required to present the results of their findings to their peers and supervisors as part of a seminar program.
It is not expected that a project at this level will represent a significant contribution to new knowledge; nor is it expected that projects will resolve great intellectual problems. The timeframe available for the project is simply too short to permit students to tackle complex or difficult problems. Indeed, a key aim of the thesis is to specify a research topic that arouses sufficient intellectual curiosity, and presents an appropriate range and diversity of technical and conceptual challenges, while remaining manageable and allowing achievable outcomes within the time and resources available. It is important that the topic be of sufficient scope and complexity to allow a student to learn their craft and demonstrate their research skills. Equally imperative is that the task not be so demanding as to elude completion.

This unit is suitable for any engineering discipline student who is interested in developing an understanding of analysis and design in energy, power generation, environment and relevant economic issues. The aim is to acquaint students with the methods engineers use to design and evaluate the thermal processes used for the production of electricity. It also assesses and deals with the environmental consequences of power generation. At the end of this unit students will be able to carry out preliminary design and economic impact analyses for electrical power generation systems.
A series of topics will be covered in relation to energy and electricity and relevant issues. The course contents will include:

1. Economic analysis of energy systems;
2. Environmental impact of power generation;
3. Principles of thermodynamics;
4. First law analysis of power cycles;
5. Design and simulation of power generation cycles;
6. Second law efficiency and availability;
7. Energy efficiency;
8. CO2 capture and sequestration;
9. Design of various components of thermal power plants.

Objectives: To provide students with the necessary skills to use commercial Computational Fluid Dynamics packages and to carry out research in the area of Computational Fluid Dynamics. Expected outcomes: Students will have a good understanding of the basic theory of Computational Fluid Dynamics, including discretisation, accuracy and stability. They will be capable of writing a simple solver and using a sophisticated commercial CFD package. Syllabus summary: A course of lectures, tutorials and laboratories designed to provide the student with the necessary tools for using a sophisticated commercial CFD package. A set of laboratory tasks will take the student through a series of increasingly complex flow simulations, requiring an understanding of the basic theory of computational fluid dynamics (CFD). The laboratory tasks will be complemented by a series of lectures in which the basic theory is covered, including: governing equations; finite difference methods, accuracy and stability for the advection/diffusion equation; direct and iterative solution techniques; solution of the full Navier-Stokes equations; turbulent flow; Cartesian tensors; turbulence models.

Dissertation aims to provide students with the opportunity to carry out a defined piece of independent research in a setting and in a manner that fosters the development of individual engineering and scientific research skills. These skills include the capacity to define a research question, showing how it relates to existing knowledge, identifying the tools needed to investigate the question, carrying out the research in a systematic way, analysing the results obtained and presenting the outcomes in a report that is clear, coherent and logically structured. Dissertation is undertaken across two semesters of enrolment, in two successive Units of Study of 12 credits points each. Dissertation A covers first steps of thesis research starting with development of research proposal. Dissertation B covers the second of stage writing up and presenting the research results.
Students are asked to write a thesis based on a research project, which is very often related to some aspect of a staff member's research interests. Some projects will be experimental in nature, others may involve computer-based simulation, feasibility studies or the design, construction and testing of equipment. Direction of thesis work may be determined by the supervisor or be of an original nature, but in either case the student is responsible for the execution of the practical work and the general layout and content of the project itself. The final capstone report must be the student's individual work. The Thesis will be judged on the extent and quality of the student's original work and particularly how critical, perceptive and constructive he or she has been in assessing his/her work and that of others. Students will also be required to present the results of their findings to their peers and supervisors as part of a seminar program.
It is expected that a project at this level will represent a contribution to new knowledge meeting the level of a postgraduate research degree.

Dissertation aims to provide students with the opportunity to carry out a defined piece of independent research in a setting and in a manner that fosters the development of individual engineering and scientific research skills. These skills include the capacity to define a research question, showing how it relates to existing knowledge, identifying the tools needed to investigate the question, carrying out the research in a systematic way, analysing the results obtained and presenting the outcomes in a report that is clear, coherent and logically structured. Dissertation is undertaken across two semesters of enrolment, in two successive Units of Study of 12 credits points each. Dissertation A covers first steps of thesis research starting with development of research proposal. Dissertation B covers the second of stage writing up and presenting the research results.
Students are asked to write a thesis based on a research project, which is very often related to some aspect of a staff member's research interests. Some projects will be experimental in nature, others may involve computer-based simulation, feasibility studies or the design, construction and testing of equipment. Direction of thesis work may be determined by the supervisor or be of an original nature, but in either case the student is responsible for the execution of the practical work and the general layout and content of the project itself. The final capstone report must be the student's individual work. The Thesis will be judged on the extent and quality of the student's original work and particularly how critical, perceptive and constructive he or she has been in assessing his/her work and that of others. Students will also be required to present the results of their findings to their peers and supervisors as part of a seminar program.
It is expected that a project at this level will represent a contribution to new knowledge meeting the level of a postgraduate research degree.

This course introduces atomistic computational techniques used in modern engineering to understand phenomena and predict material properties, behaviour, structure and interactions at nano-scale. The advancement of nanotechnology and manipulation of matter at the molecular level have provided ways for developing new materials with desired properties. The miniaturization at the nanometre scale requires an understanding of material behaviour which could be much different from that of the bulk. Computational nanotechnology plays a growingly important role in understanding mechanical properties at such a small scale. The aim is to demonstrate how atomistic level simulations can be used to predict the properties of matter under various conditions of load, deformation and flow. The course covers areas mainly related to fluid as well as solid properties, whereas, the methodologies learned can be applied to diverse areas in nanotechnology such as, liquid-solid interfaces, surface engineering, nanorheology, nanotribology and biological systems. This is a course with a modern perspective for engineers who wish to keep abreast with advanced computational tools for material characterization at the atomic scale.

The aim is to teach students in the undergraduate and postgraduate levels basic concepts about friction, lubrication and wear applicable to design and operation of mechanical systems used in engineering, industrial, and modern applications. Examples of these systems are lubrication of internal combustion engines, gearboxes, artificial hip/knee joints, and micro/nano electromechanical systems.

This UoS should prepare the student to be able to undertake vibration and acoustic measurement calculations for industry design situations.
The unit aims to introduce a number of new concepts required for analysis of vibrations and acoustics. The response of structure under different dynamic forces, including human and aerodynamic, will be investigated. A number of hands-on experiments will be performed to allow an understanding of the concepts and applicability.
The acoustics component will include: basic acoustics theory, sound generation and propagation, impedance, absorbing materials, industrial noise sources, isolation methods of noise control, enclosures, instrumentation and measurement, frequency analysis, noise regulations and computational acoustics.

This unit introduces engineering design via optimization, i.e. finding the "best possible" solution to a particular problem. For example, an autonomous vehicle must find the fastest route between two locations over a road network; a biomedical sensing device must compute the most accurate estimate of important physiological parameters from noise-corrupted measurements; a feedback control system must stabilize and control a multivariable dynamical system (such as an aircraft) in an optimal fashion.
The student will learn how to formulate a design in terms of a "cost function", when it is possible to find the "best" design via minimization of this "cost", and how to do so. The course will introduce widely-used optimization frameworks including linear and quadratic programming (LP and QP), dynamic programming (DP), path planning with Dijkstra's algorithm, A*, and probabilistic roadmaps (PRMs), state estimation via Kalman filters, and control via the linear quadratic regulator (LQR) and Model Predictive Control (MPC). There will be constant emphasis on connections to real-world engineering problems in control, robotics, aerospace, biomedical engineering, and manufacturing.

The aim of this course is to enhance the student`s manufacturing engineering skills in the CAD/CAM area. The course focuses on CNC milling as a manufacturing automation process applied to a project. The management, planning and marketing of a typical engineering project are also discussed.
Objectives:Through integrated project-based learning and hands-on-machine training, you will learn
o How to successfully complete a CAD/CAM and CNC mill based project.
o Manufacturing management and system skills, such as product planning, manufacturing sequence, time and cost;
o The science in designing and selecting a manufacturing method.
o How to effectively present your ideas and outcomes using oral and report based methods.
It is expected that through your hard work in the semester, you will find
o Enhanced learning by real-world problems.
o Improved comprehensive skill in manufacturing design.

The objective of the course is to give students skills in the area of highly non-linear finite element analysis. Major topics covered include CAD, Implicit / explicit codes, Wire frame geometry, Elemental Theory, Materials, Pre-processing using ETA-PreSys, Contact, LS-Dyna, using NCAC FEM models, Modeling fasteners, Material covered in lectures is reinforced through independent research, assignments, quizzes and a major capstone project. The capstone project involves the development of an approved crash scenario.

This unit of study provides an introduction to the field of biomedical engineering, from the point of view of the engineering and the global biomedical industry itself. After completion of this unit, students will have a clear understanding of what biomedical engineering is, both from the engineering perspective and the commercial/industry perspective.