This unit of study aims to introduce graduate engineering students from all disciplines to the concepts and practices of entrepreneurial thinking. Introduction to Entrepreneurship will offer the foundation for leaders of tomorrow's high-tech companies, by providing the knowledge and skills important to the creation and leadership of entrepreneurial ventures. The focus of the unit of study is on how to launch, lead and manage a viable business starting with concept validation to commercialisation and successful business formation.
The following topics are covered: Entrepreneurship: Turning Ideas into Reality, Building the Business Plan, Creating a Successful Financial Plan, Project planning and resource management, Budgeting and managing cash flow, Marketing and advertising strategies, E-Commerce and Entrepreneurship, Procurement Management Strategies, The Legal Environment: Business Law and Government Regulation, Intellectual property: inventions, patents and copyright, Workplace, workforce and employment topics, Conflict resolution and working relationships, Ethics and Social Responsibility.
Assumed knowledge: Some limited industry experience is preferred but not a must.

The aim of this UoS is to give students an insight and understanding of the environmental and sustainability challenges that Australia and the planet are facing and how these have given rise to the practice of Sustainable Design, Engineering and Management. The objective of this course is to provide a comprehensive overview of the nature and causes of the major environmental problems facing our planet, with a particular focus on energy and water, and how engineering is addressing these challenges.
The course starts with a description of the physical basis of global warming, and proceeds with a discussion of Australia`s energy and water use, an overview of sustainable energy and water technologies and sustainable building design. Topics include the principles of sustainability, sustainable design and social responsibility, sustainable and renewable energy sources, and sustainable use of water. Aspects of designing a sustainable building, technologies that minimise energy and water consumption, consider recycling and reducing waste disposal using advanced design will also be discussed during this course.

To develop an understanding of principles of safety systems management and risk management, as applied to engineering systems. AS/NZS 4801:2001 & 4804:2001 form the foundation for teaching methods of developing, implementing, monitoring and improving a safety management system in an Engineering context.
Students will be exposed to a number of case studies related to safety systems and on completion of the course be able to develop a safety management plan for an Engineering facility that meets the requirements of NSW legislation and Australian standards for Occupational Health and Safety management systems.
Students are introduced to a variety of risk management approaches used by industry, and methods to quantify and estimate the consequences and probabilities of risks occurring, as applied to realistic industrial scenarios.

Project Management processes are what moves the project from initiation through all its phases to a successful conclusion. This course takes the project manager from a detailed understanding of process modelling through to the development and implementation of management processes applicable to various project types and industries and covers approaches to reviewing, monitoring and improving these processes.

This unit is concerned with the theory and practice of real time computer systems as applied to the design of embedded systems and computer control systems in engineering, manufacturing and automation.
Some background in programming, object oriented design and system architecture is assumed. A prime aim of this unit of study is to develop a capacity for research and inquiry in the field of real-time and embedded systems. Completion of this unit will facilitate progression to advanced study or to work in embedded systems and industrial real-time computer systems.
The following topics are covered. Hard real time and embedded systems, as applied to engineering, manufacturing and automation. Timing and scheduling: periodic vs aperiodic processes, deadlines, rate monotonic, deadline monotonic and earliest deadline scheduling. Management of shared resources. Real-time languages and their features. Real time operating systems. Real time software design. Embedded Systems: overview, signal flow, interfacing. Reliability and fault tolerance in hardware and software. SCADA and DCCS. Some case studies.

This unit will cover software quality planning, validation and verification methods and techniques, risk analysis, software review techniques, software standards and software process improvement and software reliability. The unit covers testing and quality assurance from a unit testing/developer-based focus up to an overall quality process overview of the software development life cycle. Students who successfully complete this unit will: understand the fundamental concepts of software quality, be able to assess the quality of a software design, be acquainted with methods of building for quality and be able to verify and test a unit of code through familiarity with unit testing strategies and understanding software quality assurance as a rigorous and structured formal process.

This unit aims to introduce students to the main issues involved in producing large Internet systems by using and building application frameworks. Frameworks allow great reuse so developers do not have to design and implement applications from scratch, as students have done in ELEC3610 The unit lays down the basic concepts and hands on experience on the design and development of enterprise systems, emphasizing the development of systems using design patterns and application frameworks. A project-based approach will introduce the problems often found when building such systems, and will require students to take control of their learning. A project-based approach will introduce the problems often found when building such systems, and will require students to take control of their learning. Several development Java frameworks will be used, including Spring, Hibernate, and others. Principles of design patterns will also be studied.

Model-Based Software Engineering focuses on modern software engineering methods, technologies, and processes used in professional development projects. It covers both the pragmatic engineering elements and the underlying theory of the model-based approach to the analysis, design, implementation, and maintenance of complex software-intensive systems. Students will participate in a group project, which will entail developing and/or evolving a software system, following a full development cycle from requirements specification through to implementation and testing using up-to-date industrial development tools and processes. At the end of the course they will provide a presentation and demonstration of their project work to the class. There is no formal teaching of a programming language in this unit, although students will be expected to demonstrate through their project work their general software engineering and architectural skills as well as their mastery of model-based methods and technologies. Students successfully completing this unit will have a strong practical and theoretical understanding of the modern software development cycle as applied in industrial settings. In particular, they will be familiar with the latest model-based software engineering approaches necessary for successfully dealing with today's highly complex and challenging software systems. The pedagogic grounds for this course and its focus on model-based approaches are to arm new software engineers with skills and perspectives that extend beyond the level of basic programming. Such skills are essential to success in software development nowadays, and are in great demand but very low supply. The dearth of such expertise is one of the key reasons behind the alarmingly high failure rate of industrial software projects (currently estimated at being greater than 40%). Therefore, this unit complements SQE and strengthens a key area in the program.

This is an advanced course in HCI, Human Computer Interaction, with a focus on Pervasive Computing. It introduces the key aspects of HCI and explores these in terms of the new research towards creating user interfaces that disappear into the environment and are available pervasively, for example in homes, workplaces, cars and carried or work.

The unit introduces networking concepts beyond the best effort service of the core TCP/IP protocol suite. Understanding of the fundamental issues in building an integrated multi-service network for global Internet services, taking into account service objectives, application characteristics and needs and network mechanisms will be discussed. Enables students to understand the core issues and be aware of proposed solutions so they can actively follow and participate in the development of the Internet beyond the basic bit transport service.

Information technology (IT) has significantly contributed to the research and practice of medicine, biology and health care. The IT field is growing enormously in scope with biomedicine taking a lead role in utilizing the evolving applications to its best advantage. The goal of this unit of study is to provide students with the necessary knowledge to understand the information technology in biomedicine. The major emphasis will be on the principles associated with biomedical digital imaging systems and related biomedicine data processing, analysis, visualization, registration, modelling, compression, management, communication and security. Specialist areas such as Picture Archiving and Communication Systems (PACS), computer-aided diagnosis (CAD), content-based medical image retrieval (CBMIR), and ubiquitous m-Health, etc. will be addressed. A broad range of practical integrated clinical applications will be also elaborated.

Students will work individually or in groups on an assigned project for the Semester. The concepts covered depend on the nature of the project, but broadly cover research and inquiry, and information literacy.

Students will work individually or in groups on an assigned project for the Semester. The concepts covered depend on the nature of the project, but broadly cover research and inquiry, and information literacy.

Students will work individually or in groups on an assigned project for the Semester. The concepts covered depend on the nature of the project, but broadly cover research and inquiry, and information literacy.

To complete a substantial research project and successfully analyse a problem, devise appropriate experiments, analyse the results and produce a well-argued, in-depth thesis.
Department permission required for enrolment in the following session(s); 1,2

o complete a substantial research project and successfully analyse a problem, devise appropriate experiments, analyse the results and produce a well-argued, in-depth thesis.
Department permission required for enrolment in the following session(s); 1,2

The unit covers general foundations of communication systems and a detailed walk through of the implementation of the TCP/IP protocol stack, which forms the basis of the Internet. The unit also covers the basic knowledge of how to analyse, design and implement simple communication protocols.
Objectives: On completion of this unit students will have developed an understanding of the principles and practice of the layered model of communications architecture, the TCP/IP protocol stack and its component protocols, and various common techniques and tools for protocol analysis and design.

The study of algorithms is a fundamental aspect of computing. This unit of study covers data structures, algorithms, and gives an overview of the main ways of computational thinking from simple list manipulation and data format conversion, up to shortest paths and cycle detection in graphs. Students will gain essential knowledge in computer science, including basic concepts in data structures, algorithms, and intractability, using paradigms such as dynamic programming, divide and conquer, greed, local search, and randomisation, as well NP-hardness.

Programming in a legible, maintainable, reusable way is essential to solve complex problems in the pervasive computing environments. This unit will equip students with foundation of programming concepts that are common to widely used programming languages. Students will be progressively guided in this introductory unit from necessary and important building blocks of programming to the object-oriented approach. Java, one of the most popular programming languages, is used in this unit. It provides interdisciplinary approaches, applications and examples to support students from broad backgrounds such as science, engineering, and mathematics.

This unit will focus on technological advances supporting the development of e-commerce applications and systems. This includes client and server side development of e-commerce applications. AJAX is the core client side technology covered in this course. Both server scripting and server page technology are covered as key server side technology. It will also examine the emerging trend of web services and its role in E-commerce systems. This unit aims at providing both conceptual understanding and hand-on experiences for the technologies covered.

This unit covers topics on software architecture for large-scale enterprises. Computer systems for large-scale enterprises handle critical business processes, interact with computer systems of other organisations, and have to be highly reliable, available and scalable. This class of systems are built up from several application components, incorporating existing "legacy" code and data stores as well as linking these through middleware technologies, such as distributed transaction processing, remote objects, message-queuing, publish-subscribe, and clustering. The choice of middleware can decide whether the system achieves essential non- functional requirements such as performance and availability. The objective of this unit of study is to educate students for their later professional career and it covers Software Architecture topics of the ACM/IEEE Software Engineering curriculum. Objective: The objective of this unit of study is to educate students for their later professional career and it covers topics of the ACM/IEEE Software Engineering curriculum.

This unit is intended to introduce and motivate the study of high performance computer systems. The student will be presented with the foundational concepts pertaining to the different types and classes of high performance computers. The student will be exposed to the description of the technological context of current high performance computer systems. Students will gain skills in evaluating, experimenting with, and optimizing the performance of high performance computers. The unit also provides students with the ability to undertake more advanced topics and courses on high performance computing.

This unit brings together a wide range of skils that are routinely practised in bioinformatics, from the "hard" subjects of mathematics, statistics and computer science, to the "soft" subjects in the biological/health sciences and pharmacology. It covers the essentials of bioinformatics data gathering, manipulation, mining and storage that underpin bioinformatics research, and provides additional practice in the graduate attributes of Research and Inquiry, Information Literacy and Communication through analysis of scientific research, use of large bioinformatics data sets, and writing of reports.

The unit builds upon the knowledge of engineering mathematics, electronic devices and circuit theory and simulation techniques. It deals with both technical and business aspects of sustainable electrical energy systems. In technical aspect, it focuses on energy conversion and electrical characteristics of different renewable energy sources and integration of multiple energy sources into power system both at distribution and transmission levels. In business aspect, it focuses on economical, marketing and political aspects of installing and managing sustainable electrical energy systems in present and future society. It lays a solid foundation of practical and managerial skills on electronics and electrical (power) engineering and later studies such as intelligent electricity networks and advanced energy conversion and power systems. The following topics are covered: modern power systems; distributed generation; co-generation; tri-generation; microturbines; fuel cells; renewable energy sources: solar, wind, hydro, biomass, wind turbines; photovoltaic; grid-connected power systems; stand-alone power systems.

This unit aims to give students an introduction to the planning and operation of modern electricity grids, also known as 'smart grids'. Traditional power networks featured a small number of large base-load plants sending power out over transmission lines to be distributed in radial lower voltage networks to loads. In response to the need to reduce carbon impact, future networks will feature diverse generation scattered all over the network including at distribution levels. Also there will be new loads such as electric vehicles and technologies including energy storage and lower voltage power flow control devices. The operation of these new networks will be possible by much greater use of information and communication technology (ICT) and control over the information networks.
The unit will cover recent relevant developments in energy technologies as well as important components of 'smart grids' such as supervisory control and data acquisition (SCADA), substation automation, remote terminal units (RTU), sensors and intelligent electronic devices (IED). Operation of these electricity grids requires a huge amount of data gathering, communication and information processing. The unit will discuss many emerging technologies for such data, information, knowledge and decision processes including communication protocols and network layouts, networking middleware and coordinated control. Information systems and data gathering will be used to assess key performance and security indicators associated with the operation of such grids including stability, reliability and power quality.

This unit aims to teach the basic issues involved in the analysis and design of computer-controlled systems. The emphasis is on theory rather than technological application or industrial practice.
However, students are expected to test some of these ideas on a few benchmark control problems in the laboratory. Completion of the unit will facilitate progression to advanced study in the area and to work in industrial control. This unit assumes a basic knowledge of calculus, functions of real variables, Laplace transform, matrix theory and control theory.
The following topics are covered. Sampled data systems: aliasing. Zero order hold equivalent: inverse of sampling, sampling system with time delay. Properties of difference equations: solution, stability, change of co-ordinates, Z transform. Input output models: pulse response, pulse transfer operator, pulse transfer function, interpretation of poles and zeros.
Analysis of discrete time system: stability (Jury's test, Nyquist criterion, Lyapunov method), sensitivity and robustness, observability (observers, reduced order observers), reachability and controllers, loss of reachability/observability through sampling, output feedback, the Separation theorem. Optimal control: Kalman filter, linear quadratic regulator, output feedback, the Separation theorem.
Approximating continuous time controllers. Finite word length mplementations.

This unit will introduce the key ideas in modern wireless telecommunications networks. It will address both physical layer issues such as propagation and modulation, plus network layer issues such as capacity, radio resource management and mobility management issues.
The following topics are covered. Mobile radio channel: Multipath fading, diversity, log-normal fading, mean propagation loss, propagation models. Cellular technologies: Cell types, coverage, frequency reuse, spectral efficiency, link budget, power budget, traffic capacity. Omnidirectional and sectorised antennas. Handover, interaction with the fixed network. Microcells and macrocells, Medium access control: Near-far effect and the hidden terminal problem. Multiple access schemes: FDMA, TDMA, CDMA. Aloha and s-Aloha, carrier sense multiple access, reservation-based MAC schemes, polling, spread-aloha multiple access. GSM: System architecture, radio resource management, mobility management, connection management.
Third generation systems: WCDMA and cdma2000. Wireless LANs: IEEE802.11, Hiperlan, Bluetooth. Convergence: GSM evolution to data services via GPRS and EDGE. Issues with TCP over wireless. Mobility management in MobileIP.

This unit of study serves as an introduction to communications network research. The unit relies on a solid understanding of data communications and mobile networks. It introduces some of the currently most debated research topics in mobile networking and presents an overview of different technical solutions. Students are expected to critically evaluate these solutions in their context and produce an objective analysis of the advantages/disadvantages of the different research proposals. The general areas covered are wireless Internet, mobility management, quality of service in mobile and IP networks, ad hoc networks, and cellular network architectures. The following topics are covered. Introduction to wireless and mobile Internet. Wireless cellular data networks. Cellular mobile networks. Mobile networks of the future. Quality of service in a mobile environment. Traffic modelling for wireless Internet. Traffic management for wireless Internet. Mobility management in mobile networks. Transport protocols for mobile networks. Internet protocols for mobile networks.

Satellite communication systems provide fixed and mobile communication services over very large areas of land, sea and air. This unit presents the fundamental knowledge and skills in the analysis and design of such systems. It introduces students to the broad spectrum of satellite communications and its position in the entire telecommunications network; helps students to develop awareness of the key factors affecting a good satellite communications system and theoretical and practical skills in the design of a satellite communications link.
Topic areas include: satellite communication link design; propagation effects and their impact on satellite performance; satellite antennas; digital modem design, speech codec design; error control for digital satellite links.

This unit aim to teach the fundamentals concepts associated with:
* Networked Embedded Systems, wireless sensor networks
* Wireless channel propagation and radio power consumption
* Wireless networks, ZigBee, Bluetooth, etc.
* Sensor principle, data fusion, source detection and identification
* Multiple source detection, multiple access communications.
* Network topology, routing, network information theory
* Distributed source channel coding for sensor networks
* Power-aware and energy-aware communication protocols.
* Distributed embedded systems problems such as time synchronization and node localization,
Exposure to several recently developed solutions to address problems in wireless sensor networks and ubiquitous computing giving them a well-rounded view of the state-of the-art in the networked embedded systems field.
Student involvement with projects will expose them to the usage of simulators and/or programming some types of networked embedded systems platforms.
* Ability to identify the main issues and trade-offs in networked embedded systems.
* Understanding of the state-of-the-art solutions in the area
* Based on the above understanding, ability to analyze requirements and devise first-order solutions for particular networked embedded systems problems.
* Familiarization with a simulator platform and real hardware platforms for network embedded systems through the Students involvement in projects.

This unit examines the basic cryptographic building blocks of security, working through to their applications in authentication, key exchange, secret and public key encryption, digital signatures, protocols and systems. It then considers these applications in the real world, including models for integrity, authentication, electronic cash, viruses, firewalls, electronic voting, risk assessment, secure web browsers and electronic warfare. Practical cryptosystems are analysed with regard to the assumptions with which they were designed, their limitations, failure modes and ultimately why most end up broken.

This unit aims to introduce students to the main issues involved in producing systems that use sensor data, such as those from physiology and activity tracking, often combined with patients self-reports. As sensing devices become ubiquitous, data processing, storage and visualization techniques are becoming part of all health systems, both institutionalized and individually driven.
The unit is related to, but distinct, to health informatics - an area that focuses on the the use of computing to deliver cost efficient healthcare and the area of bioinformatics, that explores the role of computing in understanding biology at the cellular level (e.g. genome). This unit focuses on the technical and non-technical problems of developing increasingly ubiquitous devices and systems that can be used for personal and clinical monitoring.

This unit of study prepares graduating students with insight and skills in how to turn a concept into a high technology startup company. The class will provide students with knowledge, practical experience and frameworks to assist in evaluating the market for a technology product or service, the design & viability of business models around it, the formulation of a funding-reading business plan & financials, capital raising options & process, venture capital, building distribution channels, intellectual property protection, putting together an A-grade management team, term sheets & funding documentation, technology sales models and going global. We will look at real world case studies of successful technology companies (and flame outs). Does Twitter have a viable business model? Will Facebook eat its lunch? Is YouTube just burning cash? Will Google rule the world? During the period of the course, students will form teams and write a business plan around a concept they propose. Each student will assume a role in the team (CEO, CTO, CFO, VP Sales & Marketing). The plan will be judged by a panel of real world venture capitalists, entrepreneurs and angel investors to determine the final grade for the course. The course is limited to 40 students (10 teams of 4) in addition to a waiting list of 8. Be warned that a serious commitment will be required in developing the concept into a viable business plan. The outcome, however, will be very rewarding to those students interested in starting the next Google. Prospective students should send an email in 400 words or less on why they want to enroll prior to acceptance, to the course email address. This course is taught by instructors experienced in technology startups & venture capital. The course will include a number of guest lectures by industry.

The purpose of this unit is to enable students to undertake an overseas learning activity during the university's summer or winter break while completing a Masters degree in either Engineering, Professional Engineering, Information Technologies or Project Management. The learning activity may comprise either a short project under academic or industry supervision or summer or winter school unit of study at an approved overseas institution. The learning activity should demonstrate outcomes and workload equivalent to a 6 credit point Master's level unit in the student's current award program.
Students may enrol in this unit with permission from the school and the Sub-Dean Students for the Faculty of Engineering and Information Technologies.

The purpose of this unit is to enable students to undertake an overseas learning activity during the university's summer or winter break while completing a Masters degree in either Engineering, Professional Engineering, Information Technologies or Project Management. The learning activity may comprise either a short project under academic or industry supervision or summer or winter school unit of study at an approved overseas institution. The learning activity should demonstrate outcomes and workload equivalent to a 6 credit point Master's level unit in the student's current award program.
Students may enrol in this unit with permission from the school and the Sub-Dean Students for the Faculty of Engineering and Information Technologies.

This unit covers topics of active and cutting-edge research within IT in the area of 'Cloud Computing'.
Cloud Computing is an emerging paradigm of utilising large-scale computing services over the Internet that will affect individual and organization's computing needs from small to large. Over the last decade, many cloud computing platforms have been set up by companies like Google, Yahoo!, Amazon, Microsoft, Force.com, Ebay and Facebook. Some of the platforms are open to public via various pricing models. They operate at different levels and enable business to harness different computing power from the cloud.
In this course, we will describe the important enabling technologies of cloud computing, explore the state-of-the art platforms and the existing services, and examine the challenges and opportunities of adopting cloud computing. The course will be organized as a series of presentations and discussions of seminal and timely research papers and articles. Students are expected to read all papers, to lead discussions on some of the papers and to complete a hands-on cloud-programming project.

This unit will explore the limitations of IT project management and the most promising techniques to overcome project failure. It will start by reviewing case study research showing we have reached the limits of traditional IT project management practice. The theoretical base will be completed by exploring the finding that senior management have more impact on success than traditional approaches.
Participants will be introduced to and learn to apply the most promising tools and techniques needed to govern IT projects. The topics reviewed will include:
1) strategy,
2) organisational change,
3) project sponsorship,
4) programme management,
5) performance measurement,
6) culture
7) portfolio management.
8) Relevant Australian and International Standards on IT/Project Governance and new industry methodologies around portfolio, programme and change management will be reviewed.

The forces that currently drive business transformation, such as globalization, the IT revolution and environmental sustainability, require businesses to be in a constant state of change to stay competitive in turbulent markets. However, as companies need to maintain their current revenue streams, they need to progress through a series of integrated business transformation projects. In this unit you will learn how to analyse an organisation within a local and global context and develop your knowledge of techniques required for managing technology-enabled business transformation projects. Topics covered include: the drivers of business transformation, managing change as a process, analysing information and processes, and planning, leading, sustaining, diffusing and learning from transformational projects.