Objectives:
a) To develop an understanding of the role of Mechanical Engineers.
b) To understand the content of the degree structure and how the subjects are applied.
c) To develop an understanding of a range of machining and manufacturing processes required to make mechanical components.
Introductory Mechanical Engineering (50%): Subject introduces the Mechanical Engineering degrees. An overview of the range of roles of a Mechanical Engineer (people, case studies, guests, etc.). The skills/knowledge required of an engineer and the relationship between the subjects in the degree program and how they are applied by practicing engineers. Fundamentals of machinery and equipment common to this degree, with some introductory analysis techniques and problem solving methods.
Manufacturing Technology (50%): Safety requirements: All students are required to comply with the safety regulations. Students who fail to do this will not be permitted to enter the workshops. In particular, approved industrial footwear must be worn, and long hair must be protected by a hair net. Safety glasses must be worn at all times. Workshop Technology practical work in: (a) Fitting . Measurement, marking, hammers, cutting, tapping and screwing, reaming and scraping. (b)Machining . lathe, mill, grinder, drill, shaper, and finishing operations. (c)Welding . Practical work in gas and electric welding. (d)Blacksmithing and forging. (e) Foundary . moulding and casting.

MATH1001 is designed to provide a thorough preparation for further study in mathematics and statistics. It is a core unit of study providing three of the twelve credit points required by the Faculty of Science as well as a Junior level requirement in the Faculty of Engineering.
This unit of study looks at complex numbers, functions of a single variable, limits and continuity, vector functions and functions of two variables. Differential calculus is extended to functions of two variables. Taylor's theorem as a higher order mean value theorem.

MATH1002 is designed to provide a thorough preparation for further study in mathematics and statistics. It is a core unit of study providing three of the twelve credit points required by the Faculty of Science as well as a Junior level requirement in the Faculty of Engineering.
This unit of study introduces vectors and vector algebra, linear algebra including solutions of linear systems, matrices, determinants, eigenvalues and eigenvectors.

The unit will introduce students to fundamental principles of programming. The language used will be Matlab but the principles taught are readily portable to other languages like C and Java. The unit material will be presented in a manner which will help students to draw a connection between programming constructs and real engineering applications. The unit will use engineering inspired case-studies : especially from Civil, Chemical, Aerospace and Mechanical streams, to motivate new material. There will be a major project which uses programming to solve a real world engineering problem. The extensive Matlab library for visualization will also be introduced. Matlab will cover two-thirds of the unit. The remaining one-third will be devoted to the use of Excel in engineering scenarios. Furthermore, cross integration between Matlab and Excel will also be highlighted.

Professional Engineering 1 is an introductory Unit of Study within the Faculty of Engineering. The semester 1 course is aimed at students from the School of Aerospace, Mechanical and Mechatronic Engineering. It seeks to introduce newly admitted undergraduates to general principles of professional engineering practice, a range of contemporary professional engineering issues, plus outline skills related to academic study within an engineering environment. The subject is structured around a team based design and build project, in which students apply the professional engineering concepts they are learning to an engineering project. Professional engineering topics to be covered include: accessing information, teamwork, creativity, leadership, written and oral communication, project management, problem solving, ethics, liability, occupational health and safety and environmental issues.

MATH1003 is designed to provide a thorough preparation for further study in mathematics and statistics. It is a core unit of study providing three of the twelve credit points required by the Faculty of Science as well as a Junior level requirement in the Faculty of Engineering.This unit of study first develops the idea of the definite integral from Riemann sums, leading to the Fundamental Theorem of Calculus. Various techniques of integration are considered, such as integration by parts.The second part is an introduction to the use of first and second order differential equations to model a variety of scientific phenomena.

MATH1005 is designed to provide a thorough preparation for further study in mathematics and statistics. It is a core unit of study providing three of the twelve credit points required by the Faculty of Science as well as a Junior level requirement in the Faculty of Engineering.
This unit offers a comprehensive introduction to data analysis, probability, sampling, and inference including t-tests, confidence intervals and chi-squared goodness of fit tests.

The unit aims to provide students with an understanding of and competence in solving statics and introductory dynamics problems in engineering. Tutorial sessions will help students to improve their group work and problem solving skills, and gain competency in extracting a simplified version of a problem from a complex situation. Emphasis is placed on the ability to work in 3D as well as 2D, including the 2D and 3D visualization of structures and structural components, and the vectorial 2D and 3D representations of spatial points, forces and moments. Introduction to kinematics and dynamics topics includes position, velocity and acceleration of a point; relative motion, force and acceleration, momentum, collisions and energy methods.

Learn about selected historical events, research methods, analysis techniques, application of theory and analysis to real machinery, use of machine and hand tools.
This is a project based subject where the students will design, build and test their own designs. Historical developments in the area of the project are researched and applied and research into relevant fields is required to fully understand and analyse the project problem.
The unit ties in with workshop component of MECH1560. Skills developed become relevant in MECH2400 Mechanical Design 1

This unit is an introductory course in engineering materials. The unit aims to develop students' understanding of the structures, mechanical properties and manufacture of a range of engineering materials as well as how the mechanical properties relate to microstructure and forming and treatment methods. The unit has no prerequisite subject and is therefore intended for those with little or no previous background in engineering materials. However the unit does require students to take a significant degree of independent responsibility for developing their own background knowledge of materials and their properties. The electrical, magnetic, thermal and optical properties of materials are a critical need-to-know area where students are expected to do most of their learning by independent study.

This unit of study aims to teach: Dynamics of Rigid Bodies: Analysis of Planar mechanisms; Kinematics of rigid bodies; Kinetics of rigid bodies. Students will also develop their skills in: how to model and analyse dynamic systems and the application of theory to real systems through practical/laboratory sessions.
At the end of this unit students will have developed skills in modelling and analysing planar mechanisms and rigid body dynamic systems.
Course content will include planar mechanisms, linkages, mobility; instant centres of rotation, Kennedy's theorem; velocity and acceleration polygons; kinematics of rigid bodies, frames of reference, velocity and acceleration, rotating frame of reference, relative velocity and acceleration, gyroscopic acceleration; kinetics of rigid bodies, linear momentum and Euler's first law; angular momentum and Euler's second law; centre of mass; moments of inertia, parallel axis and parallel plane theorems, principal axes and principal moments of inertia, rotation about an axis; impulse and momentum; work and energy, kinetic and potential energies; applications to orbital and gyroscopic motion; introduction to Lagrangian methods.

MATH2067 starts by introducing students to solution techniques of ordinary and partial differential equations (ODEs and PDEs) relevant to the engineering disciplines: it provides a basic grounding in these techniques to enable students to build on the concepts in their subsequent engineering classes. The main topics are Fourier series, second order ODEs, including inhomogeneous equations and Laplace transforms, and second order PDEs in rectangular domains (solution by separation of variables).
The unit moves on to topics from vector calculus, including vector-valued functions (parametrised curves and surfaces; vector fields; div, grad and curl; gradient fields and potential functions), line integrals (arc length; work; path-independent integrals and conservative fields; flux across a curve), iterated integrals (double and triple integrals; polar, cylindrical and spherical coordinates; areas, volumes and mass; Green's Theorem), flux integrals (flow through a surface; flux integrals through a surface defined by a function of two variables, though cylinders, spheres and parametrised surfaces), Gauss's Divergence Theorem and Stokes' Theorem.

This unit aims to develop in students an understanding of the engineering measurements and instrumentation systems. The students will acquire an ability to make accurate and meaningful measurements. It will cover the general areas of electrical circuits and mechanical/electronic instrumentation for strain, force, pressure, moment, torque, displacement, velocity, acceleration, temperature and so on.

Equilibrium of deformable structures; basic concept of deformation compatibility; stress and strain in bars, beams and their structures subjected to tension, compression, bending, torsion and combined loading; statically determinate and indeterminate structures; energy methods for bar and beam structures; simple buckling; simple vibration; deformation of simple frames and cell box beams; simple two-dimensional stress and Morh's circle; problem-based applications in aerospace, mechanical and biomedical engineering.

This unit covers the fundamentals of fluid statics and fluid dynamics. At the end of this unit students will have: an understanding of the basic equations governing the statics and dynamics of fluids; the ability to analyze and determine the forces applied by a static fluid; the ability to analyse fluids in motion. The course will cover both inviscid and viscous fluid flow. The course will introduce the relevant parameters for fluid flow in internal engineering systems such as pipes and pumps and external systems such as flow over wings and airfoils. Course content will cover the basic concepts such as viscosity, density, continuum, pressure, force, buoyancy and acceleration; and more detailed methods including continuity, conservation of momentum, streamlines and potential flow theory, Bernoulli equation, Euler equation, Navier-Stokes equation. Experiments will introduce flow measuring devices and flow observation.

This unit aims to teach the basic laws of thermodynamics and heat transfer. At the end of this unit students will have: an understanding of the basic laws of thermodynamics and heat transfer; The ability to analyze the thermodynamics of a simple open or closed engineering system. The basic knowledge to analyse and design 1D thermal circuits. Course content will include concepts of heat and work, properties of substances, first law of thermodynamics, control mass and control volume analysis, thermal efficiency, entropy, second law of thermodynamics, reversible and irreversible processes, isentropic efficiency, power and refrigeration cycles, heat transfer by conduction, convection and radiation, 1D thermal circuits and transient heat transfer.

Aim: For students to experience a realistic the design process and to develop good engineering skills.
Course Objectives: To develop an understanding of:
1. the need for and use of standard drawings in the communication and definition of parts and assemblies,
2. Efficient use of a CAD package
3. creativity,
4. the design process from initial idea to finished product
5. Methods used to analyse designs
6. standard components

This unit of study aims to allow students to develop an understanding of methods for modeling and controlling linear, time-invariant systems. Techniques examined will include the use of differential equations and frequency domain approaches to modeling of systems. This will allow students to examine the response of a system to changing inputs and to examine the influence of external stimuli such as disturbances on system behaviour. Students will also gain an understanding of how the responses of these mechanical systems can be altered to meet desired specifications and why this is important in many engineering problem domains.
The study of control systems engineering is of fundamental importance to most engineering disciplines, including Electrical, Mechanical, Mechatronic and Aerospace Engineering. Control systems are found in a broad range of applications within these disciplines, from aircraft and spacecraft to robots, automobiles, computers and process control systems. The concepts taught in this course introduce students to the mathematical foundations behind the modelling and control of linear, time-invariant dynamic systems.
In particular, topics addressed in this course will include:
1. Techniques for modelling mechanical systems and understanding their response to control inputs and disturbances. This will include the use of differential equations and frequency domain methods as well as tools such as Root Locus and Bode plots.
2. Representation of systems in a feedback control system as well as techniques for determining what desired system performance specifications are achievable, practical and important when the system is under control
3. Theoretical and practical techniques that help engineers in designing control systems, and an examination of which technique is best in solving a given problem.

This unit aims to develop an understanding of: the principles of thermodynamic cycles, gas mixtures, combustion and thermochemistry applied to engineering processes, power and refrigeration systems; heat transfer equipment design. To classify heat transfer situations as conduction, convection, radiation, forced or natural convection. To determine the appropriate approach to problems, the type of solution needed, analytical or numerical. To be able to arrive at a solution and predict heat transfer rates and be able to design and size heat transfer equipment.
At the end of this unit students will be able to: apply the principles of thermodynamics and heat transfer to engineering situations; have the ability to tackle and solve a range of complex thermodynamics cycles, air conditioning, combustion, chemical equilibrium, problems involving gas mixtures; have the ability to tackle and solve a range of heat transfer problems including finned heat exchangers, cooling by fluids, quenching, insulation and solar radiation.
Course content will include: Thermodynamics: exergy and entropy, power cycles: spark ignition, Diesel, gas turbine; gas mixtures, humidity, psychrometry, air-conditioning, combustion: stoichiometry, gas analysis, combustion, thermochemistry, adiabatic flame temperature, 2nd Law analysis of reacting systems, equilibrium, exergy, Heat Transfer: conduction, thermal circuits, general conduction equation, cylindrical fins, heat exchangers, numerical solutions, unsteady conduction, convection, analytical, forced convection correlations, natural convection, boiling, radiation spectrum, blackbody, radiation properties and laws, environmental radiation, solar.

This unit aims to provide students with a detailed understanding of the theory and practice of fluid mechanics in the context of mechanical engineering. Students will gain skills in problem solving in areas of pipe, pump and channel flow; lift and drag on immersed bodies; boundary layer theory and gas dynamics. At the end of this unit students will have the ability to critically assess and solve problems commonly found in fluid mechanics practice, such as sizing pumps and piping systems, designing channels, and determing the lift and drag characteristics of submerged bodies. Additionally, they will develop a structured and systematic approach to problem solving.

This unit of study aims to: teach the fundamentals of analyzing stress and deformation in a solid under complex loading associated with the elemental structures/components in aerospace, mechanical and biomedical engineering; develop the following attributes: understand the fundamental principles of solid mechanics and basic methods for stress and deformation analysis of a solid structure/element in the above mentioned engineering areas; gain the ability to analyze problems in terms of strength and deformation in relation to the design, manufacturing and maintenance of machines, structures, devices and elements in the above mentioned engineering areas. At the end of this unit students will have a good understanding of the following: applicability of the theories and why so; how and why to do stress analysis; why we need equations of motion/equilibrium; how and why to do strain analysis; why we need compatibility equations; why Hooke's law, why plasticity and how to do elastic and plastic analysis; how and why to do mechanics modeling; how to describe boundary conditions for complex engineering problems; why and how to solve a mechanics model based on a practical problem; why and how to use energy methods for stress and deformation analysis; why and how to introduce plates and shells and how to do analysis for plate and shell structures; why and how to do stress concentration analysis and its relation to fracture and service life of a component/structure; how and why to do fundamental plastic deformation analysis; how and why the finite element method is introduced and used for stress and deformation analysis. The ultimate outcome is that the students have the ability to solve engineering problems by comprehensively using the skills attained above.

This unit aims for students to understand the relationship between properties of materials and their microstructures and to improve mechanical design based on knowledge of mechanics and properties of materials.
At the end of this unit students should have the capability to select proper materials for simple engineering design.
Course content will include: short-term and long-term mechanical properties; introductory fracture and fatigue mechanics, dislocations; polymers and polymer composite materials; ceramics and glasses; structure-property relationships; selection of materials in mechanical design.

This unit aims to apply some newly acquired skills to begin to understand how stress and strain are distributed in the more common categories of machine parts. Reducing the loads in standard parts to just the most significant, leads to a range of relatively simple analyses. By using different degrees of simplification and a proportional amount of effort, the examination of components can provide results of corresponding accuracy. To lead the student to utilize and be aware of modern computer methods, to be aware of past methods and be prepared of future developments. Not all the analysis of mechanical components are covered in the course but the ones that are deal with exemplify principles that can be applied to novel items that our graduates may encounter in their professional life.
At the end of this unit students will be able to: apply fatigue life prediction in general to any component; design a bolted joint to carry tensile and or shear loads: use a numerical solver to arrive at the optimal dimensions of a component, given its loads and sufficient boundary conditions; design shafts to carry specified steady and alternating bending moments and torques; design and construct a space frame, such as that for a dune buggy, to meet requirements of strength and rigidity; be able to arrive at the principle parameters of a pair of matched spur gears, and to be able to extend this to helical gears.
Course content will include: stress and strain in engineering materials; yield and ultimate fail conditions in malleable and brittle materials; spatial, 3D frameworks; deflections due to forces, moments and torques.

The unit aims to teach the fundamentals of manufacturing processes and systems in mechanical, mechatronic and biomedical engineering, including traditional and advanced manufacturing technologies.
This unit aims to develop the following attributes: to understand the fundamental principles of manufacturing technologies for the above mentioned engineering areas; to gain the ability to select existing manufacturing processes and systems for direct engineering applications; to develop ability to create innovative new manufacturing technologies for advanced industrial applications; to develop ability to invent new manufacturing systems
At the end of this unit students will have a good understanding of the following: merits and advantages of individual manufacturing processes and systems; principles of developing new technologies; comprehensive applications and strategic selection of manufacturing processes and systems.
Course content will include:
Manufacturing Processes: Common processes and their science (machining, casting, powder metallurgy, metal working, welding); merits and limitations; CNC and CAM;
Manufacturing Systems: Economics in manufacturing; flexible manufacturing; group technology; materials selection and requirements planning; quality control; introduction to new technology; introduction to e-manufacturing; human factors; plant layout.

The BE requires students to obtain industrial work experience of twelve weeks duration (60 working days) or its equivalent towards satisfying the requirements for award of the degree. Students are recommended to undertake their work experience in the break between Year 3 and 4, however any engineering work taken after Year 2 may be accepted for the requirements of this unit.
Students must be exposed to professional engineering practice to enable them to develop an engineering approach and ethos, and to gain an appreciation of engineering ethics. and to gain an appreciation of engineering ethics.
The student is required to inform the Faculty of any work arrangements by emailing the Undergraduate Administration Office of the Faculty of Engineering and Information Technologies prior to the commencement of work. Assessment in this unit is by the submission of a portfolio containing written reports on the involvement with industry. For details of the reporting requirements, go to the faculty`s Practical Experience web site.

This unit of study aims to create an awareness of issues surrounding the management of projects; impart knowledge resulting in a more global approach to the practice of engineering and engineering management; and provide a vehicle for improving communication skills (both written and oral). The course also aims, when taken together with other courses offered by the School, to substantially meet the requirement of the Institution of Engineers, Australia, for undergraduate training in management theory. On completion of this unit students should be able to: plan small projects and contribute effectively to planning of larger projects; work effectively in small teams; understand their role and expected conduct in the management of engineering projects; perform well in that role from the outset, with performance limited only by experience; prepare an interesting and relevant presentation on aspects of their work for their peers or senior managers; recognise the range of expertise they may need to call on in their role as an engineer working on a project (e.g. in safety and environmental fields); understand what the experts are saying, and be able to contribute effectively to that discussion.

This unit teaches the student how to recognise where and how their theoretical skills can be applied to the practical situations that they may encounter in this field of design. The unit utilises assumed theoretical knowledge and skills to elucidate the stresses and strains that exit in the different categories of machine parts. It sets out to make the students familiar with the simplifications that are applied to arrive at the analytic expressions commonly used to analyse the individual categories parts. These simplifications usually begin by assuming that only particular types of loads are carried by each category. The resulting analyses provide approximations to the actual stresses and it is possible to have different degrees of simplifications, requiring more or less work, giving better or worse approximations. Should a particular part be used to carry loads that were not allowed for in the traditional method then some more appropriate method must be found or developed. An important aspect is to make the student practiced in a range of modern concepts, techniques and tools, and to be made aware of their strengths and limitations. Options may be provided in the choice of design assignments. Biomedical engineering and vehicle design problems may be provided as options to more general machine design problems.

The fourth year honours thesis aims to provide students with the opportunity to carry out a defined piece of independent research in a setting and in a manner that fosters the development of engineering research skills. These skills include the capacity to define a research question, showing how it relates to existing knowledge, identifying the tools needed to investigate the question, carrying out the research in a systematic way, analysing the results obtained and presenting the outcomes in a report that is clear, coherent and logically structured. Honours thesis is undertaken across two semesters of enrolment, in two successive Units of Study of 6 credits points each. Honours Thesis A covers first steps of thesis research starting with development of research proposal. Thesis B covers the second of stage writing up and presenting the research results.
Students are asked to write a thesis based on a research project, which is very often related to some aspect of a staff member's research interests. Some projects will be experimental in nature, others may involve computer-based simulation, feasibility studies or the design, construction and testing of equipment. Direction of thesis work may be determined by the supervisor or be of an original nature, but in either case the student is responsible for the execution of the practical work and the general layout and content of the thesis itself. The final thesis must be the student's individual work, although research is sometimes conducted in the framework of a group project shared with others. Students undertaking research on this basis will need to take care in ensuring the individual quality of their own research work and the final thesis submission. The thesis will be judged on the extent and quality of the student's original work and particularly how critical, perceptive and constructive he or she has been in assessing his/her work and that of others. Students will also be required to present the results of their findings to their peers and supervisors as part of a seminar program.
It is not expected that a thesis at this level will represent a significant contribution to new knowledge; nor is it expected that theses will resolve great intellectual problems. The timeframe available for the thesis is simply too short to permit students to tackle complex or difficult problems. Indeed, a key aim of the thesis is to specify a research topic that arouses sufficient intellectual curiosity, and presents an appropriate range and diversity of technical and conceptual challenges, while remaining manageable and allowing achievable outcomes within the time and resources available. It is important that the topic be of sufficient scope and complexity to allow a student to learn their craft and demonstrate their research skills. Equally imperative is that the task not be so demanding as to elude completion.

The fourth year honours thesis aims to provide students with the opportunity to carry out a defined piece of independent research or design work in a setting and in a manner that fosters the development of engineering skills in research or design. These skills include the capacity to define a research or design question, showing how it relates to existing knowledge, identifying the tools needed to investigate the question, carrying out the research or design in a systematic way, analysing the results obtained and presenting the outcomes in a report that is clear, coherent and logically structured. Honours thesis is undertaken across two semesters of enrolment, in two successive Units of Study of 6 credits points each. Honours Thesis A covers first steps of thesis research starting with development of research proposal. Thesis B covers the second of stage writing up and presenting the research results.
Students are asked to write a thesis based on a research or major design project, which is very often related to some aspect of a staff member's research interests. Some projects will be experimental in nature, others may involve computer-based simulation, feasibility studies or the design, construction and testing of equipment. Direction of thesis work may be determined by the supervisor or be of an original nature, but in either case the student is responsible for the execution of the practical work and the general layout and content of the thesis itself. The final thesis must be the student's individual work, although research is sometimes conducted in the framework of a group project shared with others. Students undertaking research on this basis will need to take care in ensuring the individual quality of their own research work and the final thesis submission. The thesis will be judged on the extent and quality of the student's original work and particularly how critical, perceptive and constructive he or she has been in assessing his/her work and that of others. Students will also be required to present the results of their findings to their peers and supervisors as part of a seminar program.
It is not expected that a thesis at this level will represent a significant contribution to new knowledge; nor is it expected that theses will resolve great intellectual problems. The time frame available for the thesis is simply too short to permit students to tackle complex or difficult problems. Indeed, a key aim of the thesis is to specify a research or design topic that arouses sufficient intellectual curiosity, and presents an appropriate range and diversity of technical and conceptual challenges, while remaining manageable and allowing achievable outcomes within the time and resources available. It is important that the topic be of sufficient scope and complexity to allow a student to learn their craft and demonstrate their research or design skills. Equally imperative is that the task not be so demanding as to elude completion.

To complete the research requirement for their engineering degree, students now have a choice of either completing Honours Thesis A/B (AMME 4111/AMME4112) or Project A/B (AMME 4121/AMME4122). Project A/B is intended to be more practical in orientation while Thesis A/B demands extensive literature review and critical analysis of outcomes. Honours Thesis is a program for individuals whereas Projects can be done by groups or by an individual. Engineering Project A/B is undertaken across two semesters of enrolment, in two successive Units of Study of 6 credits points each. Engineering Project A covers first steps of project work, starting with development of project proposal. Project B covers the second of stage writing up and presenting the project results. The fourth year engineering project aims to provide students with the opportunity to carry out a defined piece of independent design work in a setting and in a manner that fosters the development of engineering design skills. These skills include the capacity to define a engineering design problem, showing how it relates to prior art, identifying appropriate tools and methods, carrying out a design in a systematic way and presenting outcomes in a report that is clear, coherent and logically structured

To complete the research requirement for their engineering degree, students now have a choice of either completing Honours Thesis A/B (AMME 4111/AMME4112) or Project A/B (AMME 4121/AMME4122). Project A/B is intended to be more practical in orientation while Thesis A/B demands extensive literature review and critical analysis of outcomes. Honours Thesis is a program for individuals whereas Projects can be done by groups or by an individual. Engineering Project A/B is undertaken across two semesters of enrolment, in two successive Units of Study of 6 credits points each. Engineering Project A covers first steps of project work, starting with development of project proposal. Project B covers the second of stage writing up and presenting the project results. The fourth year engineering project aims to provide students with the opportunity to carry out a defined piece of independent design work in a setting and in a manner that fosters the development of engineering design skills. These skills include the capacity to define a engineering design problem, showing how it relates to prior art, identifying appropriate tools and methods, carrying out a design in a systematic way and presenting outcomes in a report that is clear, coherent and logically structured

Objectives: To provide students with the necessary skills to use commercial Computational Fluid Dynamics packages and to carry out research in the area of Computational Fluid Dynamics. Expected outcomes: Students will have a good understanding of the basic theory of Computational Fluid Dynamics, including discretisation, accuracy and stability. They will be capable of writing a simple solver and using a sophisticated commercial CFD package. Syllabus summary: A course of lectures, tutorials and laboratories designed to provide the student with the necessary tools for using a sophisticated commercial CFD package. A set of laboratory tasks will take the student through a series of increasingly complex flow simulations, requiring an understanding of the basic theory of computational fluid dynamics (CFD). The laboratory tasks will be complemented by a series of lectures in which the basic theory is covered, including: governing equations; finite difference methods accuracy and stability for the advection equation, diffusion equation; direct and iterative solution techniques; solution of the full Navier-Stokes equations; turbulent flow; Cartesian tensors; turbulence models.

This unit aims to develop understanding of the engineering design and analysis of different devices and technologies for generating power from renewable sources including: solar, wind, wave, tidal, ocean thermal, geothermal, hydro-electric, and biofuels; to understand the environmental, operational and economic issues associated with each of these technologies. At the end of this unit students will be able to perform in depth technical analysis of different types of renewable energy generation devices using the principles of fluid mechanics, thermodynamics and heat transfer. Students will be able to describe the environmental, economic and operational issues associated with these devices.

This unit is suitable for any engineering discipline student who is interested in developing an understanding of analysis and design in energy, power generation, environment and relevant economic issues. The aim is to acquaint students with the methods engineers use to design and evaluate the thermal processes used for the production of electricity. It also assesses and deals with the environmental consequences of power generation. At the end of this unit students will be able to carry out preliminary design and economic impact analyses for electrical power generation systems. A series of topics will be covered in relation to energy and electricity and relevant issues.
The course contents will include:
1. Economic analysis of energy systems;
2. Environmental impact of power generation;
3. Principles of thermodynamics;
4. First law analysis of power cycles;
5. Design and simulation of power generation cycles;
6. Second law efficiency and availability;
7. Energy efficiency;
8. CO2 capture and sequestration;
9. Design of various components of thermal power plants.

This unit of study develops an advanced knowledge of air conditioning systems and refrigeration applications. At the completion of this unit students will be able to determine thermal loads on structures and design an air conditioning or refrigeration system with attention to comfort, control, air distribution and energy consumption. Course content will include: applied psychrometrics, air conditioning systems, design principles, comfort in the built environment. cooling load calculations, heating load calculations, introduction and use of computer-based load estimation packages software, air distribution, fans, ducts, air conditioning controls, advanced refrigeration cycles, evaporators, condensers, cooling towers, compressors, pumps, throttling devices, piping, refrigerants, control, refrigeration equipment, simulation of refrigeration systems, food refrigeration and industrial applications; Use of CFD packages as tools to simulate flows in building and to optimise air conditioning design, energy estimation methods and software, energy evaluation and management in the built environment. Use of experimental air conditioning systems to test for thermal balances and compare with simulations.

This UoS aims to teach the basic principles of combustion highlighting the role of chemical kinetics, fluid mechanics, and molecular transport in determining the structure of flames. Students will become familiar with laminar and turbulent combustion of gaseous and liquid fuels including the formation of pollutants. They will also be briefly introduced to various applications such as internal combustion engines, gas turbines, furnaces and fires.
This UoS will cover equilibrium compositions, flammability limits, simple chemically reacting systems, detailed chemical kinetics, and the basic theory underlying laminar and turbulent combustion for both premixed and non-premixed cases. There will be an introduction to droplet combustion, the concept of mixture fraction for non-premixed flames, combustion in engines and gas turbines as well as the formation of pollutants. Fire ignition, growth and spread will also be covered with respect to safety in buildings including the hazards related to the formation of smoke and toxic products.

To understand (a) how to define the relationship between properties and microstructures of advanced engineering materials, (b) how to improve mechanical design with the knowledge of mechanics and properties of materials, and (c) how to conduct failure diagnosis of engineering materials.

This unit teaches the student how to recognise where and how their theoretical skills can be applied to the practical situations that they may encounter in this field of design. The unit utilises assumed theoretical knowledge and skills to elucidate the stresses and strains that exit in the different categories of machine parts. It sets out to make the students familiar with the simplifications that are applied to arrive at the analytic expressions commonly used to analyse the individual categories parts. These simplifications usually begin by assuming that only particular types of loads are carried by each category. The resulting analyses provide approximations to the actual stresses and it is possible to have different degrees of simplifications, requiring more or less work, giving better or worse approximations. Should a particular part be used to carry loads that were not allowed for in the traditional method then some more appropriate method must be found or developed. An important aspect is to make the student practiced in a range of modern concepts, techniques and tools, and to be made aware of their strengths and limitations. Options may be provided in the choice of design assignments. Biomedical engineering and vehicle design problems may be provided as options to more general machine design problems.

To gain a basic understanding of the major areas of interest in the biomaterials field, learn to apply basic engineering principles to biomedical systems, and understand the challenges and difficulties of biomedical systems. To participate in a project-based-learning approach to the topic of design with Biomaterials.

The objective of the course is to give students skills in the area of highly non-linear finite element analysis. Major topics covered include CAD, Implicit / explicit codes, Wire frame geometry, Elemental Theory, Materials, Pre-processing using ETA-PreSys, Contact, LS-Dyna, using NCAC FEM models, Modeling fasteners, Material covered in lectures is reinforced through independent research, assignments, quizzes and a major capstone project. The capstone project involves the development of an approved crash scenario.

The aim of this course is to enhance the student`s manufacturing engineering skills in the CAD/CAM area. The course focuses on CNC milling as a manufacturing automation process applied to a project. The management, planning and marketing of a typical engineering project are also discussed.
Objectives:Through integrated project-based learning and hands-on-machine training, you will learn
* How to successfully complete a CAD/CAM and CNC mill based project.
* Manufacturing management and system skills, such as product planning, manufacturing sequence, time and cost;
* The science in designing and selecting a manufacturing method.
* How to effectively present your ideas and outcomes using oral and report based methods.
It is expected that through your hard work in the semester, you will find
* Enhanced learning by real-world problems.
* Improved comprehensive skill in manufacturing design.

This UoS should prepare the student to be able to undertake vibration and acoustic measurement calculations for industry design situations.
The unit aims to introduce a number of new concepts required for analysis of vibrations and acoustics. The response of structure under different dynamic forces, including human and aerodynamic, will be investigated. A number of hands-on experiments will be performed to allow an understanding of the concepts and applicability.
The acoustics component will include: basic acoustics theory, sound generation and propagation, impedance, absorbing materials, industrial noise sources, isolation methods of noise control, enclosures, instrumentation and measurement, frequency analysis, noise regulations and computational acoustics.

The aim is to teach students in the undergraduate and postgraduate levels basic concepts about friction, lubrication and wear applicable to design and operation of mechanical systems used in engineering, industrial, and modern applications. Examples of these systems are lubrication of internal combustion engines, gearboxes, artificial hip/knee joints, and micro/nano electromechanical systems.

This unit introduces engineering design via optimization, i.e. finding the "best possible" solution to a particular problem. For example, an autonomous vehicle must find the fastest route between two locations over a road network; a biomedical sensing device must compute the most accurate estimate of important physiological parameters from noise-corrupted measurements; a feedback control system must stabilize and control a multivariable dynamical system (such as an aircraft) in an optimal fashion.
The student will learn how to formulate a design in terms of a "cost function", when it is possible to find the "best" design via minimization of this "cost", and how to do so. The course will introduce widely-used optimization frameworks including linear and quadratic programming (LP and QP), dynamic programming (DP), path planning with Dijkstra's algorithm, A*, and probabilistic roadmaps (PRMs), state estimation via Kalman filters, and control via the linear quadratic regulator (LQR) and Model Predictive Control (MPC). There will be constant emphasis on connections to real-world engineering problems in control, robotics, aerospace, biomedical engineering, and manufacturing.

ENGG1000 is a unique course that aims to provide students with an understanding of the historical development of Engineering with relation to societal expectations of the period. Engineering as a field of study and profession has developed over millennia from simple (yet significant) advances in technology such as the lever and wheel, to modern day examples such as advanced computers, nanomaterials and space flight.
Interaction between human society and Engineers has helped develop and guide the advancement of engineering technology; with society posing problems for Engineers to solve and Engineers developing new technology that changed the course of human history, and helped shape the world we live in.
The general philosophy behind Engineering is that Engineers work to fulfil the needs of society (water, electricity, technological improvements etc.), and as such Engineers are expected to act ethically towards society. The role of Engineers in society will be analysed and discussed from a humanistic perspective, with relation to the current Engineers Australia code of ethics. Other relevant philosophical analyses of Engineering as a skill and profession will also be examined such as, aesthetics, creativity, the epistemology of Engineering and more.
This course will use online resources extensively and help develop research and communication skills of students, whilst providing an overview of the historical significance of Engineers in society, and what it means to be an Engineer.