# Unit of study descriptions

### Master of Professional Engineering (Biomedical)

To qualify for the award of the Master of Professional Engineering in this specialisation, a candidate must complete 144 credit points, including core and elective units of study as listed below.

Candidates with a Bachelor of Engineering or equivalent in the relevant discipline, and who have reached an acceptable level of academic achievement in their prior degree, may be eligible for a reduction of volume in learning of up to 48 credit points.

### Core units

#### Year One

Year One covers Foundation units only. Candidates with a prior Bachelor of Engineering degree or equivalent in the field related to this specialisation may be exempted from Foundation units.

**AMME9261 Fluid Mechanics 1**

Credit points: 6 Session: Semester 1 Classes: Lectures, Tutorials, Laboratories Prohibitions: AMME5200 Assumed knowledge: Students are expected to be familiar with first year basic maths: integral calculus, differential calculus and linear algebra. Assessment: Through semester assessment (40%) and Final Exam (60%) Mode of delivery: Normal (lecture/lab/tutorial) day

This unit covers the fundamentals of fluid statics and fluid dynamics. At the end of this unit students will have: an understanding of the basic equations governing the statics and dynamics of fluids; the ability to analyze and determine the forces applied by a static fluid; the ability to analyse fluids in motion. The course will cover both inviscid and viscous fluid flow. The course will introduce the relevant parameters for fluid flow in internal engineering systems such as pipes and pumps and external systems such as flow over wings and airfoils. Course content will cover the basic concepts such as viscosity, density, continuum, pressure, force, buoyancy and acceleration; and more detailed methods including continuity, conservation of momentum, streamlines and potential flow theory, Bernoulli equation, Euler equation, Navier-Stokes equation. Experiments will introduce flow measuring devices and flow observation.

**AMME9500 Engineering Dynamics**

Credit points: 6 Session: Semester 1 Classes: Lectures, Tutorials, Laboratories Prohibitions: AMME5500 Assumed knowledge: University level Maths and Physics, especially covering the area of Mechanics. Assessment: Through semester assessment (40%) and Final Exam (60%) Mode of delivery: Normal (lecture/lab/tutorial) day

This unit of study aims to teach: Dynamics of Rigid Bodies: Analysis of Planar mechanisms; Kinematics of rigid bodies; Kinetics of rigid bodies. Students will also develop their skills in how to model and analyse dynamic systems and the application of theory to real systems through practical/laboratory sessions.

At the end of this unit students will have developed skills in modelling and analysing planar mechanisms and rigid body dynamic systems.

Course content will include planar mechanisms, linkages, mobility; instant centres of rotation, Kennedy's theorem; velocity and acceleration polygons; kinematics of rigid bodies, frames of reference, velocity and acceleration, rotating frame of reference, relative velocity and acceleration, gyroscopic acceleration; kinetics of rigid bodies, linear momentum and Euler's first law; angular momentum and Euler's second law; centre of mass; moments of inertia, parallel axis and parallel plane theorems, principal axes and principal moments of inertia, rotation about an axis; impulse and momentum; work and energy, kinetic and potential energies; applications to orbital and gyroscopic motion; introduction to Lagrangian methods.

At the end of this unit students will have developed skills in modelling and analysing planar mechanisms and rigid body dynamic systems.

Course content will include planar mechanisms, linkages, mobility; instant centres of rotation, Kennedy's theorem; velocity and acceleration polygons; kinematics of rigid bodies, frames of reference, velocity and acceleration, rotating frame of reference, relative velocity and acceleration, gyroscopic acceleration; kinetics of rigid bodies, linear momentum and Euler's first law; angular momentum and Euler's second law; centre of mass; moments of inertia, parallel axis and parallel plane theorems, principal axes and principal moments of inertia, rotation about an axis; impulse and momentum; work and energy, kinetic and potential energies; applications to orbital and gyroscopic motion; introduction to Lagrangian methods.

**AMME9700 Instrumentation**

Credit points: 6 Session: Semester 1 Classes: Lectures, Tutorials, Laboratories Prohibitions: AMME5700 Assumed knowledge: Programming Skills, 1st Year maths skills, familiarity with fundamental Aerospace concepts. Assessment: Through semester assessment (60%) and Final Exam (40%) Mode of delivery: Normal (lecture/lab/tutorial) day

This unit aims to develop in students an understanding of the engineering measurements and instrumentation systems. The students will acquire an ability to make accurate and meaningful measurements. It will cover the general areas of electrical circuits and mechanical/electronic instrumentation for strain, force, pressure, moment, torque, displacement, velocity, acceleration, temperature and so on.

**ENGG9801 Engineering Computing**

Credit points: 6 Session: Semester 1 Classes: Lectures, Tutorials Prohibitions: ENGG5801 OR ENGG1801 Assessment: Through semester assessment (50%) and Final Exam (50%) Mode of delivery: Normal (lecture/lab/tutorial) day

This unit introduces students to solving engineering problems using computers. Students learn how to organize data to present and understand it better using a spreadsheet (Excel), and also how to instruct the computer exactly what to do to solve complex problems using programming (Matlab). Real engineering examples, applications and case-studies are given, and students are required to think creatively and solve problems using computer tools.

Matlab will cover three-quarters of the unit. The remaining one-quarter will be devoted to the use of Excel in engineering scenarios. Furthermore, cross integration between Matlab and Excel will also be highlighted.

No programming experience is required or assumed. Students are assumed to have a basic understanding of mathematics and logic, and very elementary computing skills.

Matlab will cover three-quarters of the unit. The remaining one-quarter will be devoted to the use of Excel in engineering scenarios. Furthermore, cross integration between Matlab and Excel will also be highlighted.

No programming experience is required or assumed. Students are assumed to have a basic understanding of mathematics and logic, and very elementary computing skills.

**AMME9262 Thermal Engineering 1**

Credit points: 6 Session: Semester 2 Classes: Lectures, Tutorials, Laboratories Prohibitions: AMME5200 Assumed knowledge: Students are expected to be familiar with basic, first year, integral calculus, differential calculus and linear algebra. Assessment: Through semester assessment (50%) and Final Exam (50%) Mode of delivery: Normal (lecture/lab/tutorial) day

This unit aims to teach the basic laws of thermodynamics and heat transfer. At the end of this unit students will have: an understanding of the basic laws of thermodynamics and heat transfer; The ability to analyse the thermodynamics of a simple open or closed engineering system. The basic knowledge to analyse and design 1D thermal circuits. Course content will include concepts of heat and work, properties of substances, first law of thermodynamics, control mass and control volume analysis, thermal efficiency, entropy, second law of thermodynamics, reversible and irreversible processes, isentropic efficiency, power and refrigeration cycles, heat transfer by conduction, convection and radiation, 1D thermal circuits and transient heat transfer.

**AMME9301 Mechanics of Solids 1**

Credit points: 6 Session: Semester 2 Classes: Lectures, Tutorials Prohibitions: AMME5301 Assumed knowledge: Physics, statics, Differential Calculus, Linear Algebra, Integral Calculus and Modelling. Assessment: Through semester assessment (35%) and Final Exam (65%) Mode of delivery: Normal (lecture/lab/tutorial) day

This unit aims to teach the fundamentals of analysing stress and deformation in elemental structures/components in aerospace, mechanical and biomedical engineering (bars, beams, frames, cell box beams and tubes) under simple and combined loading of tension, compression, bending and torsion. The vibration will also be addressed. At the end of this unit students will have gained knowledge of: equilibrium of deformable structures; basic concept of deformation compatibility; stress and strain in bars, beams and their structures subjected to tension, compression, bending, torsion and combined loading; statically determinate and indeterminate structures; energy methods for bar and beam structures; simple buckling; simple vibration; deformation of simple frames and cell box beams; simple two-dimensional stress and Morh`s circle; problem-based applications in aerospace, mechanical and biomedical engineering.

**AMME9302 Materials 1**

Credit points: 6 Session: Semester 2 Classes: Lectures, Tutorials, Laboratories Prohibitions: AMME5302 OR CIVL5501 Assessment: Through semester assessment (51%) and Final Exam (49%) Mode of delivery: Normal (lecture/lab/tutorial) day

This unit is an introductory course in engineering materials. The unit aims to develop students' understanding of the structures, mechanical properties and manufacture of a range of engineering materials as well as how the mechanical properties relate to microstructure and forming and treatment methods. The unit has no prerequisite subject and is therefore intended for those with little or no previous background in engineering materials. However the unit does require students to take a significant degree of independent responsibility for developing their own background knowledge of materials and their properties. The electrical, magnetic, thermal and optical properties of materials are a critical need-to-know area where students are expected to do most of their learning by independent study.

**AMME9901 Anatomy and Physiology for Engineers**

Credit points: 6 Session: Semester 2 Classes: Lectures, Laboratories Prohibitions: AMME5901 Assumed knowledge: 6cp minimum of Junior level Biology Assessment: Through semester assessment (40%) and Final Exam (60%) Mode of delivery: Normal (lecture/lab/tutorial) day

This unit aims for students to gain familiarity with anatomical and physiological terms and understanding their meaning. Students should gain an understanding of the gross anatomy of the major systems in the human body and their importance in the design of biomedical devices. Students should gain an understanding of the major physiological principles which govern the operation of the human body. At the end of this unit students will be able to: identify the gross anatomical features of the human body; describe the normal function of the major body systems (nervous, circulatory, respiratory, musculoskeletal, digestive and renal); determine how these functions relate to cellular function; determine how a biomedical engineering device affects the normal anatomy and function of the body. Course content will include: Bone tissue; Skeletal system; Joints; Muscle Tissue; Bones & joints anatomy (prac); Muscle Mechanics; Muscle anatomy (prac); Nerve Tissue; Muscles & nerves prac; CVS Heart; Blood vessels; Respiratory System 1; Respiratory System 2; Homeostasis; CVS and Respiratory anatomy (prac); Physiology; Respiratory Physiology; Cardio-respiratory physiology (prac); Renal Anatomy; Renal Physiology; Abdominal Renal Digestive Anatomy; Digestive Physiology; Oral Presentation.

#### Year Two

**AMME9501 System Dynamics and Control**

Credit points: 6 Session: Semester 1 Classes: Lectures, Tutorials Prohibitions: AMME5501 Assumed knowledge: AMME5500 OR AMME9500 Assessment: Through semester assessment (40%) and Final Exam (60%) Mode of delivery: Normal (lecture/lab/tutorial) day

This unit of study aims to allow students to develop an understanding of methods for modeling and controlling linear, time-invariant systems. Techniques examined will include the use of differential equations and frequency domain approaches to modeling of systems. This will allow students to examine the response of a system to changing inputs and to examine the influence of external stimuli such as disturbances on system behaviour. Students will also gain an understanding of how the responses of these mechanical systems can be altered to meet desired specifications and why this is important in many engineering problem domains.

The study of control systems engineering is of fundamental importance to most engineering disciplines, including Electrical, Mechanical, Mechatronic and Aerospace Engineering. Control systems are found in a broad range of applications within these disciplines, from aircraft and spacecraft to robots, automobiles, computers and process control systems. The concepts taught in this course introduce students to the mathematical foundations behind the modelling and control of linear, time-invariant dynamic systems. In particular, topics addressed in this course will include: Techniques for modelling mechanical systems and understanding their response to control inputs and disturbances (this will include the use of differential equations and frequency domain methods as well as tools such as Root Locus and Bode plots); Representation of systems in a feedback control system as well as techniques for determining what desired system performance specifications are achievable, practical and important when the system is under control; Theoretical and practical techniques that help engineers in designing control systems, and an examination of which technique is best in solving a given problem.

The study of control systems engineering is of fundamental importance to most engineering disciplines, including Electrical, Mechanical, Mechatronic and Aerospace Engineering. Control systems are found in a broad range of applications within these disciplines, from aircraft and spacecraft to robots, automobiles, computers and process control systems. The concepts taught in this course introduce students to the mathematical foundations behind the modelling and control of linear, time-invariant dynamic systems. In particular, topics addressed in this course will include: Techniques for modelling mechanical systems and understanding their response to control inputs and disturbances (this will include the use of differential equations and frequency domain methods as well as tools such as Root Locus and Bode plots); Representation of systems in a feedback control system as well as techniques for determining what desired system performance specifications are achievable, practical and important when the system is under control; Theoretical and practical techniques that help engineers in designing control systems, and an examination of which technique is best in solving a given problem.

**AMME9990 Biomedical Engineering Technology 1**

Credit points: 6 Session: Semester 1 Classes: Lectures, Tutorials Prohibitions: AMME5990 Assumed knowledge: Junior level chemistry, intermediate level biology, and specific knowledge of cell biology at least at the junior level, and preferably at the intermediate level. Assessment: Through semester assessment (100%) Mode of delivery: Normal (lecture/lab/tutorial) day

Note: The primary teaching delivery method will be lectures. This unit of study builds on the assumed knowledge of engineering principles and junior and intermediate biology. The purpose of this unit of study is to prepare students for the challenges presented in taking innovative ideas and successfully converting them to valuable products.

Product development in the biomedical area presents unique challenges that need to be addressed to efficiently satisfy strict regulatory requirements and to successfully advance products to approval for marketing. Biomedical engineers need a broad understanding of these challenges as the main components of product development are complex and interdependent. Development of good manufacturing and quality control processes, preclinical and clinical validation of product safety and efficacy, and regulatory filings, are each progressive and interdependent processes. This UoS will provide a broad understanding of regulatory requirements for biomedical product development, with particular emphasis on the dependence of each component on the development of processes and control systems that conform to Good Manufacturing Practice. This UoS assumes prior knowledge of cell biology and chemistry and builds on that foundation to elaborate on the important aspects of biomedical product development.

The objectives are: 1. To gain a broad understanding of biomedical product development within the regulatory framework; 2. To understand the challenges and difficulties of Good Manufacturing Practice; 3. Understand the purpose and conduct of preclinical and clinical testing; 4. To understand how each of these components fit together to support regulatory filings.

The objectives are: 1. To gain a broad understanding of biomedical product development within the regulatory framework; 2. To understand the challenges and difficulties of Good Manufacturing Practice; 3. Understand the purpose and conduct of preclinical and clinical testing; 4. To understand how each of these components fit together to support regulatory filings.

**MECH9261 Fluid Mechanics 2**

Credit points: 6 Session: Semester 1 Classes: Lectures, Tutorials, Project Work - in class Prerequisites: AMME9261 OR AMME9200 Prohibitions: MECH5261 Assumed knowledge: Linear Mathematics, Vector Calculus, Differential Equations and Fourier Series Assessment: Through semester assessment (50%) and Final Exam (50%) Mode of delivery: Normal (lecture/lab/tutorial) day

This unit aims to provide students with a detailed understanding of the theory and practice of fluid mechanics in the context of mechanical engineering. At the end of this unit students will have the ability to critically assess and solve problems commonly found in fluid mechanics practice, such as sizing pumps and piping systems, designing channels, and determining the lift and drag characteristics of submerged bodies. Additionally, they will develop a structured and systematic approach to problem solving. Course content will include dimensionless analysis, Bernoulli equation, pipe flow, frictional losses, laminar and turbulent boundary layers, open channel flow and hydraulic jump, lift and drag, compressible flow and shock waves, turbomachinery.

**MECH9362 Materials 2**

Credit points: 6 Session: Semester 1 Classes: Lectures, Tutorials Prerequisites: (AMME9302 OR AMME5302) AND (AMME9301 OR AMME5301) Prohibitions: MECH5362 Assumed knowledge: Mechanics of solids: statics, stress, strain Assessment: Through semester assessment (45%) and Final Exam (55%) Mode of delivery: Normal (lecture/lab/tutorial) day

This unit aims for students to understand the relationship between properties of materials and their microstructures and to improve mechanical design based on knowledge of mechanics and properties of materials.

At the end of this unit students should have the capability to select proper materials for simple engineering design.

Course content will include: short-term and long-term mechanical properties; introductory fracture and fatigue mechanics, dislocations; polymers and polymer composite materials; ceramics and glasses; structure-property relationships; selection of materials in mechanical design.

At the end of this unit students should have the capability to select proper materials for simple engineering design.

Course content will include: short-term and long-term mechanical properties; introductory fracture and fatigue mechanics, dislocations; polymers and polymer composite materials; ceramics and glasses; structure-property relationships; selection of materials in mechanical design.

**AMME5921 Biomedical Engineering Technology 2**

Credit points: 6 Session: Semester 2 Classes: Lectures Prohibitions: MECH3921 Assumed knowledge: Junior biology, junior materials science and some engineering design Assessment: Through semester assessment (100%) Mode of delivery: Normal (lecture/lab/tutorial) day

This unit of study provides an introduction to the field of biomedical engineering, from the point of view of the engineering and the global biomedical industry itself. After completion of this unit, students will have a clear understanding of what biomedical engineering is, both from the engineering perspective and the commercial/industry perspective.

**ENGG5103 Safety Systems and Risk Analysis**

Credit points: 6 Session: Semester 2 Classes: Lectures, Tutorials Assessment: Through semester assessment (60%) and Final Exam (40%) Mode of delivery: Normal (lecture/lab/tutorial) day

To develop an understanding of principles of safety systems management and risk management, as applied to engineering systems. AS/NZS 4801:2001 & 4804:2001 form the foundation for teaching methods of developing, implementing, monitoring and improving a safety management system in an Engineering context.

Students will be exposed to a number of case studies related to safety systems and on completion of the course be able to develop a safety management plan for an Engineering facility that meets the requirements of NSW legislation and Australian standards for Occupational Health and Safety management systems.

Students are introduced to a variety of risk management approaches used by industry, and methods to quantify and estimate the consequences and probabilities of risks occurring, as applied to realistic industrial scenarios.

Students will be exposed to a number of case studies related to safety systems and on completion of the course be able to develop a safety management plan for an Engineering facility that meets the requirements of NSW legislation and Australian standards for Occupational Health and Safety management systems.

Students are introduced to a variety of risk management approaches used by industry, and methods to quantify and estimate the consequences and probabilities of risks occurring, as applied to realistic industrial scenarios.

**MECH9361 Mechanics of Solids 2**

Credit points: 6 Session: Semester 2 Classes: Tutorials, Lectures, Laboratories Prerequisites: AMME9301 OR AMME5301 Prohibitions: MECH5361 Assumed knowledge: Linear Mathematics, Vector Calculus, Differential Equations and Fourier Series Assessment: Through semester assessment (70%) and Final Exam (30%) Mode of delivery: Normal (lecture/lab/tutorial) day

The unit of study aims to: teach the fundamentals of analysing stress and deformation in a solid under complex loading associated with the elemental structures/components in aerospace, mechanical and biomedical engineering; develop the following attributes- understand the fundamental principles of solid mechanics and basic methods for stress and deformation analysis of a solid structure/element in the above mentioned engineering areas; gain the ability to analyse problems in terms of strength and deformation in relation to the design, manufacturing and maintenance of machines, structures, devices and elements in the above mentioned engineering areas.

At the end of this unit students will have a good understanding of the following: applicability of the theories and why so; how and why to do stress analysis; why we need equations of motion/equilibrium; how and why to do strain analysis; why we need compatibility equations; Hooke's law, plasticity and how to do elastic and plastic analysis; how and why to do mechanics modelling; how to describe boundary conditions for complex engineering problems; why and how to solve a mechanics model based on a practical problem; why and how to use energy methods for stress and deformation analysis; why and how to do stress concentration analysis and its relation to fracture and service life of a component/structure; how and why to do fundamental plastic deformation analysis; how and why the finite element method is introduced and used for stress and deformation analysis.

The students are expected to develop the ability of solving engineering problems by comprehensively using the skills attained above. The students will get familiar with finite element analysis as a research and analysis tool for various real-life problems.

At the end of this unit students will have a good understanding of the following: applicability of the theories and why so; how and why to do stress analysis; why we need equations of motion/equilibrium; how and why to do strain analysis; why we need compatibility equations; Hooke's law, plasticity and how to do elastic and plastic analysis; how and why to do mechanics modelling; how to describe boundary conditions for complex engineering problems; why and how to solve a mechanics model based on a practical problem; why and how to use energy methods for stress and deformation analysis; why and how to do stress concentration analysis and its relation to fracture and service life of a component/structure; how and why to do fundamental plastic deformation analysis; how and why the finite element method is introduced and used for stress and deformation analysis.

The students are expected to develop the ability of solving engineering problems by comprehensively using the skills attained above. The students will get familiar with finite element analysis as a research and analysis tool for various real-life problems.

###### Select 6 credit points from Biomedical recommended electives block.

#### Year Three

**AMME9971 Applied Tissue Engineering**

Credit points: 6 Session: Semester 1 Classes: Lectures, Tutorials Prerequisites: AMME9901 AND AMME5921 Prohibitions: AMME5971 Assumed knowledge: AMME9901 or 6 credit points of junior biology, 6 credit points of junior chemistry Assessment: Through semester assessment (60%) and Final Exam (40%) Mode of delivery: Normal (lecture/lab/tutorial) day

Note: The primary teaching delivery method will be lectures. This unit of study builds on the assumed knowledge of junior and intermediate biology and thus students will already have practical hands-on biological training. The purpose of this unit of study is to elaborate the theory and latest developments of this very new field of tissue engineering, thereby building on the existing practical and theoretical knowledge base the students have in cell biology.

With the severe worldwide shortage of donor organs and the ubiquitous problem of donor organ rejection, there is a strong need for developing technologies for engineering replacement organs and other body parts. Recent developments in biochemistry and cell biology have begun to make this possible, and as a consequence, the very new field of tissue engineering has been making dramatic progress in the last few years.

This unit will provide an introduction to the principles of tissue engineering, as well as an up to date overview of recent progress in the field of tissue engineering is and where it is going. This unit assumes prior knowledge of cell biology and chemistry and builds on that foundation to elaborate on the important aspects of tissue engineering. The objectives are: 1. To gain a basic understanding of the major areas of interest in tissue engineering; 2. To learn to apply basic engineering principles to tissue engineering systems; 3. To understand the challenges and difficulties of tissue engineering; 4. Understand the ethical issues of stem cell applications; 5. Practical classes in the preparation and evaluation of scaffolds for tissue regeneration; 6. Enable student to access web-based resources in tissue engineering (for example: Harvard-MIT Principles and Practice of Tissue Engineering); 7. Research basic skills in Tissue Engineering.

This unit will provide an introduction to the principles of tissue engineering, as well as an up to date overview of recent progress in the field of tissue engineering is and where it is going. This unit assumes prior knowledge of cell biology and chemistry and builds on that foundation to elaborate on the important aspects of tissue engineering. The objectives are: 1. To gain a basic understanding of the major areas of interest in tissue engineering; 2. To learn to apply basic engineering principles to tissue engineering systems; 3. To understand the challenges and difficulties of tissue engineering; 4. Understand the ethical issues of stem cell applications; 5. Practical classes in the preparation and evaluation of scaffolds for tissue regeneration; 6. Enable student to access web-based resources in tissue engineering (for example: Harvard-MIT Principles and Practice of Tissue Engineering); 7. Research basic skills in Tissue Engineering.

**AMME9981 Computational Biomedical Engineering**

Credit points: 6 Session: Semester 1 Classes: Tutorias, Lectures; Research, Meetings Prohibitions: AMME5981 Assumed knowledge: AMME9301, AMME9302, AMME9500, and MECH9361. Assessment: Through semester assessment (100%) Mode of delivery: Normal (lecture/lab/tutorial) day

Note: The primary teaching delivery method will be lectures. This unit of study builds on the assumed knowledge of engineering principles and junior and intermediate biology. The purpose of this unit of study is to prepare students for the challenges presented in taking innovative ideas and successfully converting them to valuable products.

This unit of study will give students a comprehensive understanding of medical image based solid modelling, advanced finite element methods, constitutive material models, design analysis and optimisation algorithms, experimental validation and their use in biomedical engineering. The students are expected to expand their research and development skills in relevant topics, and gain skills and experience with finite element software for the solution to sophisticated problems associated with biomedical engineering and experimentation techniques for the validation of these problems. The unit will take a holistic approach to the learning outcomes: an overview of typical biomedical design problems, an overview of finite element analysis software, a detailed look at advanced finite element methods in biomedical applications, and a project-based learning approach to the development of a biomedical prosthesis. By the end of the unit, the students are expected to have familiarised themselves with design project management, analysis, optimisation, and validation for biomedical engineering problems.

**MECH9660 Manufacturing Engineering**

Credit points: 6 Session: Semester 1 Classes: Lectures, Tutorials Prerequisites: MECH9400 Prohibitions: MECH5660 Assessment: Through semester assessment (100%) Mode of delivery: Normal (lecture/lab/tutorial) day

The unit aims to teach the fundamentals of manufacturing processes and systems in mechanical, mechatronic and biomedical engineering, including traditional and advanced manufacturing technologies.

This unit aims to develop the following attributes: To understand the fundamental principles of manufacturing technologies for the above mentioned engineering areas; to gain the ability to select existing manufacturing processes and systems for direct engineering applications; to develop ability to create innovative new manufacturing technologies for advanced industrial applications; to develop ability to invent new manufacturing systems.

At the end of this unit students will have a good understanding of the following: merits and advantages of individual manufacturing processes and systems; principles of developing new technologies; comprehensive applications and strategic selection of manufacturing processes and systems.

Course content will include: Manufacturing Processes:Common processes and their science (machining, casting, powder metallurgy, metal working, welding); merits and limitations; CNC and CAM; Manufacturing Systems: Economics in manufacturing; flexible manufacturing; group technology; materials selection and requirements planning; quality control; introduction to new technology; introduction to e-manufacturing; human factors; plant layout.

This unit aims to develop the following attributes: To understand the fundamental principles of manufacturing technologies for the above mentioned engineering areas; to gain the ability to select existing manufacturing processes and systems for direct engineering applications; to develop ability to create innovative new manufacturing technologies for advanced industrial applications; to develop ability to invent new manufacturing systems.

At the end of this unit students will have a good understanding of the following: merits and advantages of individual manufacturing processes and systems; principles of developing new technologies; comprehensive applications and strategic selection of manufacturing processes and systems.

Course content will include: Manufacturing Processes:Common processes and their science (machining, casting, powder metallurgy, metal working, welding); merits and limitations; CNC and CAM; Manufacturing Systems: Economics in manufacturing; flexible manufacturing; group technology; materials selection and requirements planning; quality control; introduction to new technology; introduction to e-manufacturing; human factors; plant layout.

**ENGG5217 Practical Experience**

Session: Intensive February,Intensive July,Semester 1,Semester 2 Classes: Practical Experience Assessment: Through semester assessment (100%) Mode of delivery: Professional practice

Note: Students should have completed one year of their MPE program before enrolling in this unit.

The 3 year MPE requires students to obtain industrial work experience of twelve weeks duration (60 working days) or its equivalent towards satisfying the requirements for award of the degree. Students can undertake their work experience in the final year of the MPE program (Year 3). Students may have prior work in an Engineering field carried out on completion of their undergraduate degree accepted as meeting the requirements of this component.

Students must be exposed to professional engineering practice to enable them to develop an engineering approach and ethos, and to gain an appreciation of engineering ethics. and to gain an appreciation of engineering ethics.

The student is required to inform the Faculty of any work arrangements by emailing the Graduate School of Engineering and Information Technologies. Assessment in this unit is by the submission of a portfolio containing written reports on the involvement with industry. For details of the reporting requirements, go to the faculty's Practical Experience portfolio web site http://sydney.edu.au/engineering/practical-experience/index.shtm

Students must be exposed to professional engineering practice to enable them to develop an engineering approach and ethos, and to gain an appreciation of engineering ethics. and to gain an appreciation of engineering ethics.

The student is required to inform the Faculty of any work arrangements by emailing the Graduate School of Engineering and Information Technologies. Assessment in this unit is by the submission of a portfolio containing written reports on the involvement with industry. For details of the reporting requirements, go to the faculty's Practical Experience portfolio web site http://sydney.edu.au/engineering/practical-experience/index.shtm

**AMME9961 Biomechanics and Biomaterials**

Credit points: 6 Session: Semester 2 Classes: Lectures Prohibitions: AMME5961 Assumed knowledge: AMME9901 or 6 credit points of junior biology, 6 credit points of junior chemistry, 6 credit points of junior materials science, 6 credit points of engineering design, Chemistry, biology, materials engineering, and engineering design at least at the Junior level. Assessment: Through semester assessment (50%) and Final Exam (50%) Mode of delivery: Normal (lecture/lab/tutorial) day

This course is divided into two parts- biomechanics and biomaterials:

Biomechanics is the study of the body from the point of view of it being an engineering structure. There are many aspects to this since the human body contains soft tissues, hard tissues (skeletal system), and articulating joints. We will begin with a general introduction to biomechanics, modelling the human body from the macroscopic level to the microscopic level. We will then study soft tissue mechanics, with respect to both non-linear and viscoelastic descriptions, with a significant focus on the mathematical methods used in relation to the mechanics of the system. We will then look at specific aspects of biomechanics: muscle mechanics, joint mechanics, kinematics and dynamics of human gait (gait analysis), biomechanics of cells, physiological fluid flow, biomechanics of injury, functional and mechanical response of tissues to mechanical loading.

This course will involve the study of biomaterials from two perspectives: firstly, the response of the body towards the biomaterial- an immune response and foreign body reaction; secondly, the response of the biomaterial to the body- corrosion, biodegradation, and mechanical failure. Our study will begin with the response of the body towards the biomaterial. We will begin by looking at the immune system itself and then move on to look at the normal inflammatory response. We will then study in detail the foreign body reaction caused by biomaterials. The final part of this section is the study of protein adsorption onto biomaterials, with a strong focus on the Vroman effect. Then we will move onto the response of the biomaterial to the body. We will begin by a review of biomaterials, their applications, and compositions, and mechanical properties. We will then look at key problems such as corrosion, stress shielding, static fatigue, and mechanical failure. Finally, we will take a practical look at the materials themselves. Beginning with metals, then polymers (thermoplastic, thermosetting, and biodegradable), and finally ceramics (bioinert, biodegradable, and bioactive).

Biomechanics is the study of the body from the point of view of it being an engineering structure. There are many aspects to this since the human body contains soft tissues, hard tissues (skeletal system), and articulating joints. We will begin with a general introduction to biomechanics, modelling the human body from the macroscopic level to the microscopic level. We will then study soft tissue mechanics, with respect to both non-linear and viscoelastic descriptions, with a significant focus on the mathematical methods used in relation to the mechanics of the system. We will then look at specific aspects of biomechanics: muscle mechanics, joint mechanics, kinematics and dynamics of human gait (gait analysis), biomechanics of cells, physiological fluid flow, biomechanics of injury, functional and mechanical response of tissues to mechanical loading.

This course will involve the study of biomaterials from two perspectives: firstly, the response of the body towards the biomaterial- an immune response and foreign body reaction; secondly, the response of the biomaterial to the body- corrosion, biodegradation, and mechanical failure. Our study will begin with the response of the body towards the biomaterial. We will begin by looking at the immune system itself and then move on to look at the normal inflammatory response. We will then study in detail the foreign body reaction caused by biomaterials. The final part of this section is the study of protein adsorption onto biomaterials, with a strong focus on the Vroman effect. Then we will move onto the response of the biomaterial to the body. We will begin by a review of biomaterials, their applications, and compositions, and mechanical properties. We will then look at key problems such as corrosion, stress shielding, static fatigue, and mechanical failure. Finally, we will take a practical look at the materials themselves. Beginning with metals, then polymers (thermoplastic, thermosetting, and biodegradable), and finally ceramics (bioinert, biodegradable, and bioactive).

###### Select at least 12 credit points from the Project or Research Pathway block.

###### Select up to 12 credit points from Biomedical recommended electives block.

#### Elective units

Candidates must complete 18 credit points from the following Biomedical elective units.

**AERO5010 Optimisation Methods in Engineering**

*This unit of study is not available in 2017*

Credit points: 6 Session: Semester 2 Classes: Project Work - own time 10 hrs/week. Assessment: Through semester assessment (100%) Mode of delivery: Normal (lecture/lab/tutorial) day

Note: Department permission required for enrolment

Note: Departmental Permission required for Enrolment.
Assumed knowledge: BE in the area of Aerospace or related Engineering field.

The unit is intended primarily to graduate students and senior undergraduate students with some background in linear algebra, and with basic knowledge of FORTRAN, C++ or Matlab. After completion of this unit, students will have a much deeper understanding of methods used in modern design optimisation for linear and non-linear problems. Such problems are becoming increasingly common and important in engineering and scientific work. The unit will explore the limitations, advantages and caveats associated with optimisation in engineering applications. Students will develop their own optimisation methods for linear, non-linear, and multi-objective computational and experimental applications.

Note: Department Permission required for enrolment

Note: Department Permission required for enrolment

**AERO9301 Applied Finite Element Analysis**

Credit points: 6 Session: Semester 1 Classes: Lectures, Laboratories, Tutorials Prerequisites: AERO9360 or AERO5310 or MECH9361 or MECH5361 Prohibitions: AERO5301 OR AERO4360 Assumed knowledge: BE in area of Aerospace Engineering or related Engineering field. Assessment: Through semester assessment (55%) and Final Exam (45%) Mode of delivery: Normal (lecture/lab/tutorial) day

This unit aims to teach fundamentals of modern numerical and analytical techniques for evaluating stresses, strains, deformations and strengths of representative aerospace structures. In particular the focus is on developing an understanding of: Fundamental concepts and formulations of the finite element methods for basic structural analysis; Elements for typical aerospace structures- such as beams/frames, plates/shells, and their applications and limitations; Finite element techniques for various types of problems pertinent to aerospace structures; and developing hands-on experience of using selected commercial finite element analysis program.

At the end of this unit of study the following will have been covered: Introduction to Finite Element Method for modern structural and stress analysis; One-dimensional rod elements; Generalization of FEM for elasticity; Two- and three-dimensional trusses; FEA for beams and frames in 2D and 3D; Two-dimensional problems using constant strain triangular elements; The two-dimensional isoparametric elements; Plates and shells elements and their applications; FEA for axisymmetric shells and pressure vessels, shells of revolution; FEA for axisymmetric solids subjected to axi-symmetric loading; FEA for structural dynamics, eigenvalue analysis, modal response, transient response; Finite element analysis for stress stiffening and buckling of beams, plates and shells; Three-dimensional problems in stress analysis; Extensions to the element library, higher order elements, special elements; Constraints; FEA modeling strategy; FEA for heat conduction; FEA for non-linear material and geometric analysis.

At the end of this unit of study the following will have been covered: Introduction to Finite Element Method for modern structural and stress analysis; One-dimensional rod elements; Generalization of FEM for elasticity; Two- and three-dimensional trusses; FEA for beams and frames in 2D and 3D; Two-dimensional problems using constant strain triangular elements; The two-dimensional isoparametric elements; Plates and shells elements and their applications; FEA for axisymmetric shells and pressure vessels, shells of revolution; FEA for axisymmetric solids subjected to axi-symmetric loading; FEA for structural dynamics, eigenvalue analysis, modal response, transient response; Finite element analysis for stress stiffening and buckling of beams, plates and shells; Three-dimensional problems in stress analysis; Extensions to the element library, higher order elements, special elements; Constraints; FEA modeling strategy; FEA for heat conduction; FEA for non-linear material and geometric analysis.

**AMME5202 Advanced Computational Fluid Dynamics**

Credit points: 6 Session: Semester 1 Classes: Laboratories, Lectures, Tutorials Assumed knowledge: Partial differential equations; Finite difference methods;Taylor series; Basic fluid mechanics including pressure, velocity, boundary layers, separated and recirculating flows. Basic computer programming skills. Assessment: Through semester assessment (100%) Mode of delivery: Normal (lecture/lab/tutorial) day

Objectives: To provide students with the necessary skills to use commercial Computational Fluid Dynamics packages and to carry out research in the area of Computational Fluid Dynamics. Expected outcomes: Students will have a good understanding of the basic theory of Computational Fluid Dynamics, including discretisation, accuracy and stability. They will be capable of writing a simple solver and using a sophisticated commercial CFD package.

Syllabus summary: A course of lectures, tutorials and laboratories designed to provide the student with the necessary tools for using a sophisticated commercial CFD package. A set of laboratory tasks will take the student through a series of increasingly complex flow simulations, requiring an understanding of the basic theory of computational fluid dynamics (CFD). The laboratory tasks will be complemented by a series of lectures in which the basic theory is covered, including: governing equations; finite difference methods, accuracy and stability for the advection/diffusion equation; direct and iterative solution techniques; solution of the full Navier-Stokes equations; turbulent flow; Cartesian tensors; turbulence models.

Syllabus summary: A course of lectures, tutorials and laboratories designed to provide the student with the necessary tools for using a sophisticated commercial CFD package. A set of laboratory tasks will take the student through a series of increasingly complex flow simulations, requiring an understanding of the basic theory of computational fluid dynamics (CFD). The laboratory tasks will be complemented by a series of lectures in which the basic theory is covered, including: governing equations; finite difference methods, accuracy and stability for the advection/diffusion equation; direct and iterative solution techniques; solution of the full Navier-Stokes equations; turbulent flow; Cartesian tensors; turbulence models.

**AMME5271 Computational Nanotechnology**

Credit points: 6 Session: Semester 2 Classes: Lectures, Tutorials Assumed knowledge: The students will require an understanding of basic principles of Newtonian mechanics, physics and chemistry, fluid mechanics and solid mechanics. General knowledge of how to operate a computer and work with different software is also required. Assessment: Through semester assessment (100%) Mode of delivery: Normal (lecture/lab/tutorial) day

Note: Department permission required for enrolment

This course introduces atomistic computational techniques used in modern engineering to understand phenomena and predict material properties, behaviour, structure and interactions at nano-scale. The advancement of nanotechnology and manipulation of matter at the molecular level have provided ways for developing new materials with desired properties. The miniaturisation at the nanometre scale requires an understanding of material behaviour which could be much different from that of the bulk. Computational nanotechnology plays a growingly important role in understanding mechanical properties at such a small scale. The aim is to demonstrate how atomistic level simulations can be used to predict the properties of matter under various conditions of load, deformation and flow. The course covers areas mainly related to fluid as well as solid properties, whereas, the methodologies learned can be applied to diverse areas in nanotechnology such as, liquid-solid interfaces, surface engineering, nanorheology, nanotribology and biological systems. This is a course with a modern perspective for engineers who wish to keep abreast with advanced computational tools for material characterisation at the atomic scale.

**AMME5310 Engineering Tribology**

Credit points: 6 Session: Semester 1 Classes: Lectures, Laboratories, Tutorials, Seminars Assumed knowledge: (AMME2302 OR AMME9302) AND (AMME2301 OR AMME9301) AND (MECH3261 OR MECH9261) Assessment: Through semester assessment (100%) Mode of delivery: Normal (lecture/lab/tutorial) day

Note: Department permission required for enrolment

The aim is to teach students in the undergraduate and postgraduate levels basic concepts about friction, lubrication and wear applicable to design and operation of mechanical systems used in engineering, industrial, and modern applications. Examples of these systems are lubrication of internal combustion engines, gearboxes, artificial hip/knee joints, and micro/nano electromechanical systems.

**AMME5520 Advanced Control and Optimisation**

Credit points: 6 Session: Semester 1 Classes: Lectures, Tutorials, Research Prerequisites: AMME3500 OR AMME5501 OR AMME9501 Assumed knowledge: Students have an interest and a strong understanding of feedback control systems, specifically in the area of system modelling and control design in the frequency domain. Assessment: Through semester assessment (50%) and Final Exam (50%) Mode of delivery: Normal (lecture/lab/tutorial) day

This unit introduces engineering design via optimisation, i.e. finding the "best possible" solution to a particular problem. For example, an autonomous vehicle must find the fastest route between two locations over a road network; a biomedical sensing device must compute the most accurate estimate of important physiological parameters from noise-corrupted measurements; a feedback control system must stabilise and control a multivariable dynamical system (such as an aircraft) in an optimal fashion.

The student will learn how to formulate a design in terms of a "cost function", when it is possible to find the "best" design via minimization of this "cost", and how to do so. The course will introduce widely-used optimisation frameworks including linear and quadratic programming (LP and QP), dynamic programming (DP), path planning with Dijkstra's algorithm, A*, and probabilistic roadmaps (PRMs), state estimation via Kalman filters, and control via the linear quadratic regulator (LQR) and Model Predictive Control (MPC). There will be constant emphasis on connections to real-world engineering problems in control, robotics, aerospace, biomedical engineering, and manufacturing.

The student will learn how to formulate a design in terms of a "cost function", when it is possible to find the "best" design via minimization of this "cost", and how to do so. The course will introduce widely-used optimisation frameworks including linear and quadratic programming (LP and QP), dynamic programming (DP), path planning with Dijkstra's algorithm, A*, and probabilistic roadmaps (PRMs), state estimation via Kalman filters, and control via the linear quadratic regulator (LQR) and Model Predictive Control (MPC). There will be constant emphasis on connections to real-world engineering problems in control, robotics, aerospace, biomedical engineering, and manufacturing.

**AMME5790 Introduction to Biomechatronics**

Credit points: 6 Session: Semester 2 Classes: Lectures, Laboratories, Project work - own time, Tutorials Prerequisites: MECH3921 OR MTRX3700 OR AMME5921 Prohibitions: AMME4790 Assumed knowledge: A good practical knowledge and an interest in mechanical and electronic engineering; adequate maths and applied maths skills; background knowledge of physics, chemistry and biology; Some programming capability, MATLAB, C, C++; the ability to use, and experience of, common software tools used by engineers including CAD and EDA packages. Assessment: through semester assessment (65%) and final exam (35%) Mode of delivery: Normal (lecture/lab/tutorial) day

Note: AMME5790 is the last in a series of practical Mechatronic and Electrical courses taken over three years. It takes these engineering concepts, along with the associated mathematical, electronic and mechanical theory and applies this knowledge to a series of practical, albeit specialised biomechatronic applications that will be encountered by Mechatronic Engineers who enter this broad field on graduation.

Biomechatronics is the application of mechatronic engineering to human biology, and as such it forms an important subset of the overall biomedical engineering discipline. This course focusses on a number of areas of interest including auditory and optical prostheses, artificial hearts and active and passive prosthetic limbs and examines the biomechatronic systems (hardware and signal processing) that underpin their operation.

**AMME5912 Crash Analysis and Design**

Credit points: 6 Session: Semester 1 Classes: Lectures, Tutorials Assumed knowledge: Computer Aided Drafting, Basic FEA principles and Solid Mechanics Assessment: Through semester assessment (100%) Mode of delivery: Normal (lecture/lab/tutorial) day

The objective of the course is to give students skills in the area of highly non-linear finite element analysis. Major topics covered include CAD, Implicit / explicit codes, Wire frame geometry, Elemental Theory, Materials, Pre-processing using ETA-PreSys, Contact, LS-Dyna, using NCAC FEM models, Modeling fasteners and the interaction between solids and fluids. Material covered in lectures is reinforced through independent research, assignments, quizzes and a major capstone project. The capstone project involves the development of an approved crash scenario.

**AMME5931 Nanomaterials in Medicine**

Credit points: 6 Session: Semester 1 Assumed knowledge: Junior biology and chemistry, junior materials science, intermediate anatomy and physiology, senior engineering design practice, and biomedical engineering: BIOL1003 or 6 credit points of junior biology; CHEM1101 or 6 credit points of junior chemistry; AMME1362 or 6 credit points of materials science; MECH2901 or 6 credit points of intermediate anatomy and physiology. Assessment: through semester assessment (60%) and final exam (40%) Mode of delivery: Normal (lecture/lab/tutorial) day

The application of science and technology at the nanoscale for biomedical problems promises to revolutionise medicine. Recent years have witnessed unprecedented advances in the diagnosis and treatment of diseases by applying nanotechnology to medicine. This course focuses on explaining the fundamentals of nanomedicine, and highlighting the special properties and application of nanomaterials in medicine. This course also reviews the most significant biomedical applications of nanomaterials including the recent breakthroughs in drug delivery, medical imaging, gene therapy, biosensors and cancer treatment.

**AMME5951 Fundamentals of Neuromodulation**

Credit points: 6 Session: Semester 1 Classes: Lectures Assumed knowledge: ELEC1103 or equivalent, (MECH2901 OR AMME9901), and (MECH3921 or AMME5921) Assessment: Through semester assessment (100%) Mode of delivery: Normal (lecture/lab/tutorial) day

Implantable microelectronic devices functioning either as nerve stimulators or nerve blockers comprise one of the largest markets in the global medical device industry. The aim of this unit of study is to give students a complete overview of the underlying technology (microelectronics, encapsulation biomaterials, electrode biomaterials, electrode-neural interactions, inductive power systems and data links, signal processing) and an expert review of the major technological applications on the market, which include Cochlear implants, pacemakers and implantable defibrillators, deep brain stimulators, pain control nerve blockers, bionic eye implants, functional electrical stimulation systems. The unit will also review emerging applications such as gastrointestinal disorders, obesity; vagal nerve stimulation- epilepsy, depression, carotid artery stimulation- hypertension, spinal cord stimulation- ischemic disorders, angina, peripheral vascular disease, incontinence, erectile dysfunction. The unit will conclude with a snapshot of the future: "brain on a chip" progress, nerve regrowth, neurotropins, drug/device combinations. This is a Master of Professional Engineering unit of study intended for biomedical engineering students with an interest in working in the medical device industry in the large market sector area of implantable electronic devices.

**AMME5962 Introduction to Mechanobiology**

Credit points: 6 Session: Semester 2 Classes: Lectures, Tutorials Assumed knowledge: 6 credit points of junior biology, 6 credit points of junior chemistry and 6 credit points of intermediate physiology or equivalent Assessment: through semester assessment (60%) and final exam (40%) Mode of delivery: Normal (lecture/lab/tutorial) day

Mechanobiology has emerged as a new field of science that integrates biology and engineering and is now considered to have significant influence on the development of technologies for regenerative medicine and tissue engineering. It is well known that tissues and cells are sensitive to their mechanical environment and changes to this environment can affect the physiological and pathophysiological processes. Understanding the mechanisms by which biological cells sense and respond to mechanical signals can lead to the development of novel treatments and therapies for a variety of diseases.

**AMME5992 Regulatory Affairs in the Medical Industry**

Credit points: 6 Session: Semester 2 Classes: Lectures Prerequisites: (AMME9901 OR MECH2901) AND (MECH3921 OR AMME5921) Prohibitions: AMME4992 Assumed knowledge: 6cp of Junior Chemistry, and 6cp of Biology units Assessment: through semester assessment (100%) Mode of delivery: Normal (lecture/lab/tutorial) day

Supply of medical devices, diagnostics and related therapeutic products is regulated in most jurisdictions, with sophisticated and complex regulatory regimes in all large economies. These regulations are applied both to manufacturers and designers and to biomedical engineers undertaking device custom manufacture or maintenance in clinical environments. This unit of study will explore the different regulatory frameworks in the "Global Harmonisation Task Force" group of jurisdictions (US, EU, Canada, Japan, Australia), as well as emerging regulatory practices in Asia and South America. Emphasis will be on the commonality of the underlying technical standards and the importance of sophisticated risk management approaches to compliance.

**CHNG5602 Cellular Biophysics**

Credit points: 6 Session: Semester 1 Classes: Lectures Assessment: Through semester assessment (100%) Mode of delivery: Normal (lecture/lab/tutorial) day

Students will be given a good background in the physics of biological processes. Students will understand the differences between thermodynamically closed and open systems and its relevance to cells and other biological systems. Students will be provided with an introduction to the thermodynamics of irreversible and evolutionary processes of relevance to biology. Students will be introduced to the statistical mechanics of self assembly and equilibrium structures and its relevance to biology at the molecular level.

**ELEC5803 Advanced Bioelectronics**

*This unit of study is not available in 2017*

Credit points: 6 Session: Semester 1 Classes: Lecture 2 hrs/week; Laboratory 2 hrs/week; Tutorial 2 hrs/week. Prerequisites: (ELEC2104 OR ELEC5720 OR ELEC9704) AND (ELEC2602 OR ELEC5722 OR ELEC9602) Assumed knowledge: A strong foundation in control, signal processing and electronic devices and circuits is assumed including a knowledge of analogue and digital transistor operation, circuit building blocks such as the differential pair and current mirror, AC circuit analysis, Fourier analysis. Assessment: Through semester assessment (40%) Final Exam (60%) Mode of delivery: Normal (lecture/lab/tutorial) day

Note: Department permission required for enrolment

This unit will cover advanced topics in the application of electronics and signal processing to physiological monitoring, biosensors, electrical stimulation and medical imaging. Electrical safety and regulations of medical devices in Australia will be introduced. Guest lectures will describe the different needs and requirements in several clinical areas including neonatal care, oncology, cardiology and neurology.

Assumed Knowledge: A strong foundation in control, signal processing and electronic devices and circuits is assumed including a knowledge of analogue and digital transistor operation, circuit building blocks such as the differential pair and current mirror, AC circuit analysis, Fourier analysis.

Assumed Knowledge: A strong foundation in control, signal processing and electronic devices and circuits is assumed including a knowledge of analogue and digital transistor operation, circuit building blocks such as the differential pair and current mirror, AC circuit analysis, Fourier analysis.

**ENGG5011 Engineering Foundation Studies A**

Credit points: 6 Session: Semester 1,Semester 2 Classes: Project Work - own time Mode of delivery: Supervision

Note: Department permission required for enrolment

Foundations studies covers content that may be assumed knowledge or prerequisite information for follow-on Master of Professional Engineering units. Completion of assigned project work in prescribed background material by the coordinators of the specialist programs will allow students to meet the entry requirements of the MPE degree.

**ENGG5202 Sustainable Design, Eng and Mgt**

Credit points: 6 Session: Semester 1 Classes: Lectures, Tutorials Assumed knowledge: General knowledge in science and calculus and understanding of basic principles of chemistry, physics and mechanics Assessment: Through semester assessment (70%) and Final Exam (30%) Mode of delivery: Normal (lecture/lab/tutorial) day

The aim of this unit of study is to give students an insight and understanding of the environmental and sustainability challenges that Australia and the planet are facing and how these have given rise to the practice of Sustainable Design, Engineering and Management. The objective of this course is to provide a comprehensive overview of the nature and causes of the major environmental problems facing our planet, with a particular focus on energy and water, and how engineering is addressing these challenges.

The course starts with a description of the physical basis of global warming, and proceeds with a discussion of Australia's energy and water use, an overview of sustainable energy and water technologies and sustainable building design. Topics include the principles of sustainability, sustainable design and social responsibility, sustainable and renewable energy sources, and sustainable use of water. Aspects of designing a sustainable building, technologies that minimise energy and water consumption, consider recycling and reducing waste disposal using advanced design will also be discussed during this course.

The course starts with a description of the physical basis of global warming, and proceeds with a discussion of Australia's energy and water use, an overview of sustainable energy and water technologies and sustainable building design. Topics include the principles of sustainability, sustainable design and social responsibility, sustainable and renewable energy sources, and sustainable use of water. Aspects of designing a sustainable building, technologies that minimise energy and water consumption, consider recycling and reducing waste disposal using advanced design will also be discussed during this course.

**MECH5255 Air Conditioning and Refrigeration**

Credit points: 6 Session: Semester 2 Classes: Lectures, Tutorials Prerequisites: MECH3260 OR MECH9260 OR MECH5262 Prohibitions: MECH4255 Assumed knowledge: Students are expected to be familiar with the basic laws of thermodynamics, fluid mechanics and heat transfer. Assessment: Through semester assessment (60%) and Final Exam (40%) Mode of delivery: Normal (lecture/lab/tutorial) day

This unit of study develops an advanced knowledge of air conditioning systems and refrigeration applications. At the completion of this unit students will be able to determine thermal loads on structures and design an air conditioning or refrigeration system with attention to comfort, control, air distribution and energy consumption. Course content will include: applied psychrometrics, air conditioning systems, design principles, comfort in the built environment, cooling load calculations, heating load calculations, introduction and use of computer-based load estimation packages software, air distribution, fans, ducts, air conditioning controls, advanced refrigeration cycles, evaporators, condensers, cooling towers, compressors, pumps, throttling devices, piping, refrigerants, control, refrigeration equipment, simulation of refrigeration systems, food refrigeration and industrial applications; Use of CFD packages as tools to simulate flows in building and to optimise air conditioning design, energy estimation methods and software, energy evaluation and management in the built environment. Use of experimental air conditioning systems to test for thermal balances and compare with simulations.

**MECH5275 Renewable Energy**

Credit points: 6 Session: Semester 2 Classes: Lectures, Tutorials Prerequisites: (MECH3260 AND MECH3261) OR (AERO3260 AND AERO3261) OR (MECH5262 AND MECH5261) OR (MECH9260 AND MECH9261) OR (AERO9260 AND AERO9261). Students claiming to have prerequisite knowledge based on study at other institutions must contact the unit of study coordinator before enrolling in this unit and may be required to sit a pre-exam to demonstrate that they have the necessary knowledge and skills to undertake this advanced level unit. Assumed knowledge: The students will require an understanding of the basic principles of fluid mechanics, thermodynamics and heat transfer, and the application of these principles to energy conversion systems. In particular, students should be able to analyse fluid flow in turbomachinery; perform first and second law thermodynamic analysis of energy conversion systems; and perform calculations of radiative, conductive and convective heat transfer. Assessment: Through semester assessment (100%) Mode of delivery: Normal (lecture/lab/tutorial) day

Note: Department permission required for enrolment

This unit aims to develop understanding of the engineering design and analysis of different devices and technologies for generating power from renewable sources including: solar, wind, wave, tidal, ocean thermal, geothermal, hydro-electric, and biofuels; to understand the environmental, operational and economic issues associated with each of these technologies. At the end of this unit students will be able to perform in depth technical analysis of different types of renewable energy generation devices using the principles of fluid mechanics, thermodynamics and heat transfer. Students will be able to describe the environmental, economic and operational issues associated with these devices.

**MECH5304 Materials Failure**

Credit points: 6 Session: Semester 2 Classes: Lectures, Tutorials, Laboratories Prerequisites: (AMME9301 OR AMME2301) AND (AMME9302 OR AMME2302 OR AMME1362) AND (MECH9361 OR MECH3361) AND (MECH9362 OR MECH5362) Assumed knowledge: Fundamental knowledge in materials science and engineering: 1) atomic and crystal structures 2) metallurgy 3) structure-property relationship 4) mechanics of engineering materials 5) solid mechanics Assessment: Through semester assessment (100%) Mode of delivery: Normal (lecture/lab/tutorial) day

Develop advanced knowledge and skills in diagnostic analyses of materials failure using advanced techniques; enhance students' ability in handling complex engineering cases using interdisciplinary technologies; and provide students an opportunity to understand project research.

Students will attend a series lectures on failure analyses of engineering materials addressing brittle rupture/fracture, yielding, cleavage fracture, fatigue and creep failure of engineering materials under static and dynamic loads. Students will also attend short introduction courses on optical microscopy and scanning electron microscopy (SEM) to gain some essential knowledge in diagnostic and forensic analyses of materials failure. Each student participates in a couple of group projects relevant to diagnostic analyses of failure of typical engineering materials such as steel, aluminium, magnesium alloys, engineering plastics and advanced fibre composites. Under the guidance of the supervisor, the student will learn how to initiate a proposal on failure analysis, how to do the project investigation and how to prepare and carry out technical communications (oral presentation and discussion between groups). In any of these scenarios, the student is directly responsible for the progress and quality of the results. At the end of the semester, the student is required to submit a written project report and to give a seminar presenting the aims and achievements of the project.

Students will attend a series lectures on failure analyses of engineering materials addressing brittle rupture/fracture, yielding, cleavage fracture, fatigue and creep failure of engineering materials under static and dynamic loads. Students will also attend short introduction courses on optical microscopy and scanning electron microscopy (SEM) to gain some essential knowledge in diagnostic and forensic analyses of materials failure. Each student participates in a couple of group projects relevant to diagnostic analyses of failure of typical engineering materials such as steel, aluminium, magnesium alloys, engineering plastics and advanced fibre composites. Under the guidance of the supervisor, the student will learn how to initiate a proposal on failure analysis, how to do the project investigation and how to prepare and carry out technical communications (oral presentation and discussion between groups). In any of these scenarios, the student is directly responsible for the progress and quality of the results. At the end of the semester, the student is required to submit a written project report and to give a seminar presenting the aims and achievements of the project.

**MECH5310 Advanced Engineering Materials**

Credit points: 6 Session: Semester 1 Classes: Lectures, Tutorials, Laboratories Prerequisites: (AMME2301 OR AMME9301) AND (AMME2302 OR AMME1362 OR AMME9302) AND (MECH3362 OR MECH9362) Prohibitions: MECH4310 Assessment: Through semester assessment (100%) Mode of delivery: Normal (lecture/lab/tutorial) day

To understand (a) how to define the relationship between properties and microstructures of advanced engineering materials, (b) how to improve mechanical design with the knowledge of mechanics and properties of materials, and (c) how to conduct failure diagnosis of engineering materials.

Advanced polymer matrix composites, smart/functional materials, high-strength ferrous and non ferrous alloys, superalloys, high performance polymers, eco-materials, thin film science and technology, advanced joining methods, processing-structure-property relationship, damage tolerance, toughening mechanisms, structure integrity and reliability.

Advanced polymer matrix composites, smart/functional materials, high-strength ferrous and non ferrous alloys, superalloys, high performance polymers, eco-materials, thin film science and technology, advanced joining methods, processing-structure-property relationship, damage tolerance, toughening mechanisms, structure integrity and reliability.

**MECH5416 Advanced Design and Analysis**

Credit points: 6 Session: Semester 1 Classes: Lectures, Tutorials Prerequisites: (AMME2301 OR AMME9301) AND (AMME2500 OR AMME9500) AND (MECH2400 OR MECH9400) Assumed knowledge: ENGG1802 - Eng Mechanics, balance of forces and moments; AMME2301 - Mechanics of Solids, 2 and 3 dimensional stress and strain; AMME2500 - Engineering Dynamics - dynamic forces and moments; MECH2400 - Mechanical Design 1, approach to design problems and report writing, and preparation of engineering drawing; MECH3460 - Mechanical design 2, means of applying fatigue analysis to a wide range of machine components Assessment: Through semester assessment (100%) Mode of delivery: Normal (lecture/lab/tutorial) day

This UoS utilises assumed theoretical knowledge and skills to elucidate the stresses and strains that exit in the different categories of machine parts. It sets out to make the students familiar with the simplifications that are applied to arrive at the analytic expressions commonly used to analyse each individual categories parts. These simplifications usually begin by assuming that only particular types of loads are carried by teh parts in that category. The resulting analyses provide approximations to the actual stresses. It is possible to have different degrees of simplifications, requiring more or less work, giving better or poorer approximations. Should a part be used to carry loads that were not allowed for in the traditional method then some more appropriate method must be found or developed. An important aspect is to make the student practiced in a range of modern concepts, techniques and tools, and to be made aware of their strengths and limitations.

This unit of study teaches the student how to recognise where and how their theoretical skills can be applied to the practical situations that they may encounter in this field of design.

Options may be provided in the choice of design assignments. Biomedical engineering and vehicle design problems may be provided as options to more general machine design problems.

This unit of study teaches the student how to recognise where and how their theoretical skills can be applied to the practical situations that they may encounter in this field of design.

Options may be provided in the choice of design assignments. Biomedical engineering and vehicle design problems may be provided as options to more general machine design problems.

**MECH5720 Sensors and Signals**

Credit points: 6 Session: Semester 2 Classes: Lectures, Project Work - own time, Presentation, Laboratories, Tutorials Prohibitions: MECH4720 Assumed knowledge: Strong MATLAB skills Assessment: Through semester assessment (65%) and Final Exam (35%) Mode of delivery: Normal (lecture/lab/tutorial) day

Syllabus Summary: This course starts by providing a background to the signals and transforms required to understand modern sensors. It goes on to provide an overview of the workings of typical active sensors (Radar, Lidar and Sonar). It provides insight into basic sensing methods as well as aspects of interfacing and signal processing. It includes both background material and a number of case studies.

The course covers the following topics: a) SIGNALS: Convolution, The Fourier Transform, Modulation (FM, AM, FSK, PSK etc), Frequency shifting (mixing); b) PASSIVE SENSORS: Infrared Radiometers, Imaging Infrared, Passive Microwave Imaging, Visible Imaging & Image Intensifiers; c) ACTIVE SENSORS THE BASICS: Operational Principles, Time of flight (TOF) Measurement and Imaging of Radar, Lidar and Sonar, Radio Tags and Transponders, Range Tacking, Doppler Measurement, Phase Measurement; d) SENSORS AND THE ENVIRONMENT: Atmospheric Effects, Target Characteristics, Clutter Characteristics, Multipath; e) ACTIVE SENSORS: ADVANCED TECHNIQUES: Probability of Detection, Angle Measurement and Tracking, Combined Range/Doppler and Angle Tracking, Frequency Modulation and the Fast Fourier Transform, High Range Resolution, Wide Aperture Methods, Synthetic Aperture Methods (SAR)

Objectives: The course aims to provide students with a good practical knowledge of a broad range of sensor technologies, operational principles and relevant signal processing techniques.

Expected Outcomes: A good understanding of active sensors, their outputs and applicable signal processing techniques. An appreciation of the basic sensors that are available to engineers and when they should be used.

The course covers the following topics: a) SIGNALS: Convolution, The Fourier Transform, Modulation (FM, AM, FSK, PSK etc), Frequency shifting (mixing); b) PASSIVE SENSORS: Infrared Radiometers, Imaging Infrared, Passive Microwave Imaging, Visible Imaging & Image Intensifiers; c) ACTIVE SENSORS THE BASICS: Operational Principles, Time of flight (TOF) Measurement and Imaging of Radar, Lidar and Sonar, Radio Tags and Transponders, Range Tacking, Doppler Measurement, Phase Measurement; d) SENSORS AND THE ENVIRONMENT: Atmospheric Effects, Target Characteristics, Clutter Characteristics, Multipath; e) ACTIVE SENSORS: ADVANCED TECHNIQUES: Probability of Detection, Angle Measurement and Tracking, Combined Range/Doppler and Angle Tracking, Frequency Modulation and the Fast Fourier Transform, High Range Resolution, Wide Aperture Methods, Synthetic Aperture Methods (SAR)

Objectives: The course aims to provide students with a good practical knowledge of a broad range of sensor technologies, operational principles and relevant signal processing techniques.

Expected Outcomes: A good understanding of active sensors, their outputs and applicable signal processing techniques. An appreciation of the basic sensors that are available to engineers and when they should be used.

**MECH5907 Orthopaedic and Surgical Engineering**

Credit points: 6 Session: Semester 2 Classes: Lectures Prerequisites: (AMME2302 OR AMME9302 OR AMME1362) AND (MECH2901 OR AMME9901) AND (MECH3921 OR AMME5921) Prohibitions: MECH4902 Assumed knowledge: 1.Basic concepts in engineering mechanics - statics, dynamics, and solid mechanics. 2.Basic concepts in materials science, specifically with regard to types of materials and the relation between properties and microstructure. 3.A basic understanding of human biology and anatomy. Assessment: through semester assessment (100%) Mode of delivery: Normal (lecture/lab/tutorial) day

The aims and objectives of the unit of study are: 1. To introduce the student to the details and practice of orthopaedic engineering; 2. To give students an overview of the diverse knowledge necessary for the design and evaluation of implants used in orthopaedic surgery; 3. To enable students to learn the language and concepts necessary for interaction with orthopaedic surgeons and the orthopaedic implant industry; 4. To introduce the student to the details and practice of other engineering applications in surgery, particularly in the cardiovascular realm.

**MTRX5700 Experimental Robotics**

Credit points: 6 Session: Semester 1 Classes: Laboratories, Lectures Prerequisites: (AMME3500 OR AMME5501 OR AMME9501) AND MTRX3700. Assumed knowledge: Knowledge of statics and dynamics, rotation matrices, programming and some electronic and mechanical design experience is assumed. Assessment: Through semester assessment (70%) and Final Exam (30%) Mode of delivery: Normal (lecture/lab/tutorial) day

This unit aims to present a broad overview of the technologies associated with industrial and mobile robots. Major topics covered are sensing, mapping, navigation and control of mobile robots, and kinematics and control of industrial robots. The subject consists of a series of lectures on robot fundamentals and case studies on practical robot systems. Material covered in lectures is illustrated through experimental laboratory assignments. The objective of the course is to provide students with the essential skills necessary to be able to develop robotic systems for practical applications.

At the end of this unit students will: be familiar with sensor technologies relevant to robotic systems; understand conventions used in robot kinematics and dynamics; understand the dynamics of mobile robotic systems and how they are modeled; have implemented navigation, sensing and control algorithms on a practical robotic system; apply a systematic approach to the design process for robotic systems; understand the practical application of robotic systems in manufacturing, automobile systems and assembly systems; develop the capacity to think critically and independently about new design problems; undertake independent research and analysis and to think creatively about engineering problems.

Course content will include: history and philosophy of robotics; hardware components and subsystems; robot kinematics and dynamics; sensors, measurements and perception; robotic architectures, multiple robot systems; localisation, navigation and obstacle avoidance, robot planning; robot learning; robot vision and vision processing.

At the end of this unit students will: be familiar with sensor technologies relevant to robotic systems; understand conventions used in robot kinematics and dynamics; understand the dynamics of mobile robotic systems and how they are modeled; have implemented navigation, sensing and control algorithms on a practical robotic system; apply a systematic approach to the design process for robotic systems; understand the practical application of robotic systems in manufacturing, automobile systems and assembly systems; develop the capacity to think critically and independently about new design problems; undertake independent research and analysis and to think creatively about engineering problems.

Course content will include: history and philosophy of robotics; hardware components and subsystems; robot kinematics and dynamics; sensors, measurements and perception; robotic architectures, multiple robot systems; localisation, navigation and obstacle avoidance, robot planning; robot learning; robot vision and vision processing.

### Project units

All candidates are required to complete a minimum of 12 credit points of Project or Research units during the final year of study.

Candidates achieving an average mark of 70% or higher over 48 credit points of units of study in the Year Two Table or equivalent are eligible for the Extended Capstone Project.

Extended Capstone Project candidates take Capstone Project units AMME5020 and AMME5022 (total 18 cp) in place of Capstone Project AMME5021 and 6 cp of elective units.

**AMME5020 Capstone Project A**

Credit points: 6 Session: Semester 1,Semester 2 Classes: Research Prerequisites: 96 cp from MPE degree program or 24 cp from the ME program (including any credit for previous study). Assessment: Through semester assessment (100%) Mode of delivery: Supervision

The capstone project requires the student to plan and execute a substantial research-based project, using their technical and communication skills to design, evaluate, implement, analyse and theorise about developments that contribute to professional practice thus demonstrating the achievement of AQF Level 9.

Students are required to carry out a defined piece of independent research in a setting and in a manner that fosters the development of engineering research skills. These skills include the capacity to define a research question, showing how it relates to existing knowledge, identifying the tools needed to investigate the question, carrying out the research in a systematic way, analysing the results obtained and presenting the outcomes in a report that is clear, coherent and logically structured. Capstone project is undertaken across two semesters of enrolment, in two successive Units of Study of 6 credits points each. Capstone Project A covers first steps of thesis research starting with development of research proposal. Project B covers the second of stage writing up and presenting the research results.

Students are asked to write a thesis based on a research project, which is very often related to some aspect of a staff member's research interests. Some projects will be experimental in nature, others may involve computer-based simulation, feasibility studies or the design, construction and testing of equipment. Direction of thesis work may be determined by the supervisor, however the student is expected to make a significant contribution to the direction of the project, and the student is responsible for the execution of the practical work and the general layout and content of the thesis itself. The final thesis must be the student's individual work, although research is sometimes conducted in the framework of a group project shared with others. Students undertaking research on this basis will need to take care in ensuring the individual quality of their own research work and the final thesis submission. The thesis will be judged on the extent and quality of the student's original work and particularly how critical, perceptive and constructive they have been in assessing thei work and that of others. Students will also be required to present the results of their findings to their peers and supervisors as part of a seminar program.

A thesis at this level will represent a contribution to professional practice or research, however the timeframe available for the thesis also needs to be considered when developing project scopes. Indeed, a key aim of the thesis is to specify a research topic that arouses sufficient intellectual curiosity, and presents an appropriate range and diversity of technical and conceptual challenges, while remaining manageable and allowing achievable outcomes within the time and resources available. It is important that the topic be of sufficient scope and complexity to allow a student to learn their craft and demonstrate their research skills. Equally imperative is that the task not be so demanding as to elude completion. Finally the ability to plan such a project to achieve results within constraints and the identification of promising areas and approaches for future research is a key assessment criterion.

Students are required to carry out a defined piece of independent research in a setting and in a manner that fosters the development of engineering research skills. These skills include the capacity to define a research question, showing how it relates to existing knowledge, identifying the tools needed to investigate the question, carrying out the research in a systematic way, analysing the results obtained and presenting the outcomes in a report that is clear, coherent and logically structured. Capstone project is undertaken across two semesters of enrolment, in two successive Units of Study of 6 credits points each. Capstone Project A covers first steps of thesis research starting with development of research proposal. Project B covers the second of stage writing up and presenting the research results.

Students are asked to write a thesis based on a research project, which is very often related to some aspect of a staff member's research interests. Some projects will be experimental in nature, others may involve computer-based simulation, feasibility studies or the design, construction and testing of equipment. Direction of thesis work may be determined by the supervisor, however the student is expected to make a significant contribution to the direction of the project, and the student is responsible for the execution of the practical work and the general layout and content of the thesis itself. The final thesis must be the student's individual work, although research is sometimes conducted in the framework of a group project shared with others. Students undertaking research on this basis will need to take care in ensuring the individual quality of their own research work and the final thesis submission. The thesis will be judged on the extent and quality of the student's original work and particularly how critical, perceptive and constructive they have been in assessing thei work and that of others. Students will also be required to present the results of their findings to their peers and supervisors as part of a seminar program.

A thesis at this level will represent a contribution to professional practice or research, however the timeframe available for the thesis also needs to be considered when developing project scopes. Indeed, a key aim of the thesis is to specify a research topic that arouses sufficient intellectual curiosity, and presents an appropriate range and diversity of technical and conceptual challenges, while remaining manageable and allowing achievable outcomes within the time and resources available. It is important that the topic be of sufficient scope and complexity to allow a student to learn their craft and demonstrate their research skills. Equally imperative is that the task not be so demanding as to elude completion. Finally the ability to plan such a project to achieve results within constraints and the identification of promising areas and approaches for future research is a key assessment criterion.

**AMME5021 Capstone Project B**

Credit points: 6 Session: Semester 1,Semester 2 Classes: Research Prerequisites: 96 credit points from the MPE degree program (incuding any credit for prior study) or 24 credit points from the ME degree program (incuding any credit for prior study). Assessment: Through semester assessment (100%) Mode of delivery: Supervision

The capstone project requires the student to plan and execute a substantial research-based project, using their technical and communication skills to design, evaluate, implement, analyse and theorise about developments that contribute to professional practice thus demonstrating the achievement of AQF Level 9.

Students are required to carry out a defined piece of independent research in a setting and in a manner that fosters the development of engineering research skills. These skills include the capacity to define a research question, showing how it relates to existing knowledge, identifying the tools needed to investigate the question, carrying out the research in a systematic way, analysing the results obtained and presenting the outcomes in a report that is clear, coherent and logically structured. Capstone project is undertaken across two semesters of enrolment, in two successive Units of Study of 6 credits points each. Capstone Project A covers first steps of thesis research starting with development of research proposal. Project B covers the second of stage writing up and presenting the research results.

Students are asked to write a thesis based on a research project, which is very often related to some aspect of a staff member's research interests. Some projects will be experimental in nature, others may involve computer-based simulation, feasibility studies or the design, construction and testing of equipment. Direction of thesis work may be determined by the supervisor, however the student is expected to make a significant contribution to the direction of the project, and the student is responsible for the execution of the practical work and the general layout and content of the thesis itself. The final thesis must be the student's individual work, although research is sometimes conducted in the framework of a group project shared with others. Students undertaking research on this basis will need to take care in ensuring the individual quality of their own research work and the final thesis submission. The thesis will be judged on the extent and quality of the student's original work and particularly how critical, perceptive and constructive they have been in assessing thei work and that of others. Students will also be required to present the results of their findings to their peers and supervisors as part of a seminar program.

A thesis at this level will represent a contribution to professional practice or research, however the timeframe available for the thesis also needs to be considered when developing project scopes. Indeed, a key aim of the thesis is to specify a research topic that arouses sufficient intellectual curiosity, and presents an appropriate range and diversity of technical and conceptual challenges, while remaining manageable and allowing achievable outcomes within the time and resources available. It is important that the topic be of sufficient scope and complexity to allow a student to learn their craft and demonstrate their research skills. Equally imperative is that the task not be so demanding as to elude completion. Finally the ability to plan such a project to achieve results within constraints and the identification of promising areas and approaches for future research is a key assessment criterion.

Students are required to carry out a defined piece of independent research in a setting and in a manner that fosters the development of engineering research skills. These skills include the capacity to define a research question, showing how it relates to existing knowledge, identifying the tools needed to investigate the question, carrying out the research in a systematic way, analysing the results obtained and presenting the outcomes in a report that is clear, coherent and logically structured. Capstone project is undertaken across two semesters of enrolment, in two successive Units of Study of 6 credits points each. Capstone Project A covers first steps of thesis research starting with development of research proposal. Project B covers the second of stage writing up and presenting the research results.

Students are asked to write a thesis based on a research project, which is very often related to some aspect of a staff member's research interests. Some projects will be experimental in nature, others may involve computer-based simulation, feasibility studies or the design, construction and testing of equipment. Direction of thesis work may be determined by the supervisor, however the student is expected to make a significant contribution to the direction of the project, and the student is responsible for the execution of the practical work and the general layout and content of the thesis itself. The final thesis must be the student's individual work, although research is sometimes conducted in the framework of a group project shared with others. Students undertaking research on this basis will need to take care in ensuring the individual quality of their own research work and the final thesis submission. The thesis will be judged on the extent and quality of the student's original work and particularly how critical, perceptive and constructive they have been in assessing thei work and that of others. Students will also be required to present the results of their findings to their peers and supervisors as part of a seminar program.

A thesis at this level will represent a contribution to professional practice or research, however the timeframe available for the thesis also needs to be considered when developing project scopes. Indeed, a key aim of the thesis is to specify a research topic that arouses sufficient intellectual curiosity, and presents an appropriate range and diversity of technical and conceptual challenges, while remaining manageable and allowing achievable outcomes within the time and resources available. It is important that the topic be of sufficient scope and complexity to allow a student to learn their craft and demonstrate their research skills. Equally imperative is that the task not be so demanding as to elude completion. Finally the ability to plan such a project to achieve results within constraints and the identification of promising areas and approaches for future research is a key assessment criterion.

**AMME5022 Capstone Project B Extended**

Credit points: 12 Session: Semester 1,Semester 2 Classes: Research Prerequisites: 42 credit points in the Master of Engineering and WAM >70, or 66 credit points in the Master of Professional Engineering and WAM >70 or exemption. Assessment: Through semester assessment (100%) Mode of delivery: Supervision

Note: Department permission required for enrolment

The capstone project requires the student to plan and execute a substantial research-based project, using their technical and communication skills to design, evaluate, implement, analyse and theorise about developments that contribute to professional practice thus demonstrating the achievement of AQF Level 9.

Students are required to carry out a defined piece of independent research in a setting and in a manner that fosters the development of engineering research skills. These skills include the capacity to define a research question, showing how it relates to existing knowledge, identifying the tools needed to investigate the question, carrying out the research in a systematic way, analysing the results obtained and presenting the outcomes in a report that is clear, coherent and logically structured. Capstone project is undertaken across two semesters of enrolment, in two successive Units of Study of 6 credits points each. Capstone Project A covers first steps of thesis research starting with development of research proposal. Project B covers the second of stage writing up and presenting the research results.

Students are asked to write a thesis based on a research project, which is very often related to some aspect of a staff member's research interests. Some projects will be experimental in nature, others may involve computer-based simulation, feasibility studies or the design, construction and testing of equipment. Direction of thesis work may be determined by the supervisor, however the student is expected to make a significant contribution to the direction of the project, and the student is responsible for the execution of the practical work and the general layout and content of the thesis itself. The final thesis must be the student's individual work, although research is sometimes conducted in the framework of a group project shared with others. Students undertaking research on this basis will need to take care in ensuring the individual quality of their own research work and the final thesis submission. The thesis will be judged on the extent and quality of the student's original work and particularly how critical, perceptive and constructive they have been in assessing thei work and that of others. Students will also be required to present the results of their findings to their peers and supervisors as part of a seminar program.

A thesis at this level will represent a contribution to professional practice or research, however the timeframe available for the thesis also needs to be considered when developing project scopes. Indeed, a key aim of the thesis is to specify a research topic that arouses sufficient intellectual curiosity, and presents an appropriate range and diversity of technical and conceptual challenges, while remaining manageable and allowing achievable outcomes within the time and resources available. It is important that the topic be of sufficient scope and complexity to allow a student to learn their craft and demonstrate their research skills. Equally imperative is that the task not be so demanding as to elude completion. Finally the ability to plan such a project to achieve results within constraints and the identification of promising areas and approaches for future research is a key assessment criterion.

Students are required to carry out a defined piece of independent research in a setting and in a manner that fosters the development of engineering research skills. These skills include the capacity to define a research question, showing how it relates to existing knowledge, identifying the tools needed to investigate the question, carrying out the research in a systematic way, analysing the results obtained and presenting the outcomes in a report that is clear, coherent and logically structured. Capstone project is undertaken across two semesters of enrolment, in two successive Units of Study of 6 credits points each. Capstone Project A covers first steps of thesis research starting with development of research proposal. Project B covers the second of stage writing up and presenting the research results.

Students are asked to write a thesis based on a research project, which is very often related to some aspect of a staff member's research interests. Some projects will be experimental in nature, others may involve computer-based simulation, feasibility studies or the design, construction and testing of equipment. Direction of thesis work may be determined by the supervisor, however the student is expected to make a significant contribution to the direction of the project, and the student is responsible for the execution of the practical work and the general layout and content of the thesis itself. The final thesis must be the student's individual work, although research is sometimes conducted in the framework of a group project shared with others. Students undertaking research on this basis will need to take care in ensuring the individual quality of their own research work and the final thesis submission. The thesis will be judged on the extent and quality of the student's original work and particularly how critical, perceptive and constructive they have been in assessing thei work and that of others. Students will also be required to present the results of their findings to their peers and supervisors as part of a seminar program.

A thesis at this level will represent a contribution to professional practice or research, however the timeframe available for the thesis also needs to be considered when developing project scopes. Indeed, a key aim of the thesis is to specify a research topic that arouses sufficient intellectual curiosity, and presents an appropriate range and diversity of technical and conceptual challenges, while remaining manageable and allowing achievable outcomes within the time and resources available. It is important that the topic be of sufficient scope and complexity to allow a student to learn their craft and demonstrate their research skills. Equally imperative is that the task not be so demanding as to elude completion. Finally the ability to plan such a project to achieve results within constraints and the identification of promising areas and approaches for future research is a key assessment criterion.

### Research pathway

Candidates achieving an average mark of 75% or higher over 48 credit points of units of study in the Year Two Table or equivalent are eligible for the Research Pathway.

Research pathway candidates take Dissertation units AMME5222 and AMME5223 (total 24 cp) in place of Capstone Project units and 12 cp of elective units.

**AMME5222 Dissertation A**

Credit points: 12 Session: Semester 1,Semester 2 Classes: Research Prohibitions: AMME5020 OR AMME5021 OR AMME5022 Assessment: Through semester assessment (100%) Mode of delivery: Supervision

Note: Department permission required for enrolment

Note: In order to enrol in a dissertation project, students must first secure an academic supervisor in an area that they are interested. Students must have acieved a WAM of 75% or greater in their prior year of study. The topic of your project must be determined in discussion with the supervisor.

To complete a substantial research project and successfully analyse a problem, devise appropriate experiments, analyse the results and produce a well-argued, in-depth thesis. The final research project should be completed and reported at a level which meets AQF level 9 outcomes and has original components as would be expected in MPhil.

**AMME5223 Dissertation B**

Credit points: 12 Session: Semester 1,Semester 2 Classes: Research Prohibitions: AMME5020 OR AMME5021 OR AMME5022 Assessment: Through semester assessment (100%) Mode of delivery: Supervision

Note: Department permission required for enrolment

Note: In order to enrol in a dissertation project, students must first secure an academic supervisor in an area that they are interested. Students must have acieved a WAM of 75% or greater in their prior year of study. The topic of your project must be determined in discussion with the supervisor.

To complete a substantial research project and successfully analyse a problem, devise appropriate experiments, analyse the results and produce a well-argued, in-depth thesis. The final research project should be completed and reported at a level which meets AQF level 9 outcomes and has original components as would be expected in MPhil.

### Exchange units

Exchange units require the approval of the Program Director. With approval, up to 12 credit points of Exchange units may taken in place of other units, towards the requirements ofthe degree.

**ENGG5231 Engineering Graduate Exchange A**

Credit points: 6 Session: Intensive January,Intensive July Mode of delivery: Normal (lecture/lab/tutorial) day

The purpose of this unit is to enable students to undertake an overseas learning activity during the university's summer or winter break while completing a Masters degree in either Engineering, Professional Engineering, Information Technologies or Project Management. The learning activity may comprise either a short project under academic or industry supervision or summer or winter school unit of study at an approved overseas institution. The learning activity should demonstrate outcomes and workload equivalent to a 6 credit point Master's level unit in the student's current award program.

Students may enrol in this unit with permission from the school and the Sub-Dean Students for the Faculty of Engineering and Information Technologies.

Students may enrol in this unit with permission from the school and the Sub-Dean Students for the Faculty of Engineering and Information Technologies.

**ENGG5232 Engineering Graduate Exchange B**

Credit points: 6 Session: Intensive January,Intensive July Mode of delivery: Normal (lecture/lab/tutorial) day

The purpose of this unit is to enable students to undertake an overseas learning activity during the university's summer or winter break while completing a Masters degree in either Engineering, Professional Engineering, Information Technologies or Project Management. The learning activity may comprise either a short project under academic or industry supervision or summer or winter school unit of study at an approved overseas institution. The learning activity should demonstrate outcomes and workload equivalent to a 6 credit point Master's level unit in the student's current award program.

Students may enrol in this unit with permission from the school and the Sub-Dean Students for the Faculty of Engineering and Information Technologies.

Students may enrol in this unit with permission from the school and the Sub-Dean Students for the Faculty of Engineering and Information Technologies.

For more information on units of study visit CUSP (https://cusp.sydney.edu.au).